Pego Electronics (Yi Chun) Company Limited
| Rotating speed | 80±5r/min |
| Standard | IEC60851-3 |
| Packaging Details | wooden case |
| Supply Ability | 100sets/month |
| Payment Terms | T/T |
| Input power | AC 220V±10% 50Hz |
| Delivery Time | 20 working days |
| Test length | 500mm |
| Model Number | PG-WPTA |
| Brand Name | Pego |
| Place of Origin | China |
| Certification | Third-Lab Calibration Certificate |
View Detail Information
Explore similar products
IEC60851-3 Enamelled Round Wire Jerk Test Apparatus Max Operating Pressure 0
IEC60851-3 Rectangular Wire Mandrel Winding Test Apparatus Bending arm length
Springiness Speed 7r/min Winding Wires Springiness Test Apparatus Following
IEC60851-3 Enamelled Round Wire Abrasion Resistance Test Apparatus
Product Specification
| Rotating speed | 80±5r/min | Standard | IEC60851-3 |
| Packaging Details | wooden case | Supply Ability | 100sets/month |
| Payment Terms | T/T | Input power | AC 220V±10% 50Hz |
| Delivery Time | 20 working days | Test length | 500mm |
| Model Number | PG-WPTA | Brand Name | Pego |
| Place of Origin | China | Certification | Third-Lab Calibration Certificate |
| High Light | Round Wire Peer Test Apparatus ，Enamelled Wire Peer Test Apparatus ，IEC60851-3 Peer Test Apparatus | ||
Enamelled Round Wire Peer Test Apparatus
1. Introduction
The enamelled round wire peer test apparatus is designed according to the IEC60851-3 clause 6.5 figure 6 and GB/T4074.3 clause 6.5 figure 6. It’s used to test the film adhesion properties of enameled round wires with a nominal conductor diameter over 1.000 mm.
A straight piece of wire shall be placed in the test equipment consisting of two fixing devices 500mm apart on the same axis. One of these is free to rotate. The other is not but can be displaced axially and is loaded to apply a tension to the rotating wire. The pressure om the scraper shall be sufficient to remove the coating and leave a clean smooth surface at the coating/conductor interface without scraping off a significant quantity of conductor material.The removal of the coating shall commence about 10mm from the flexing devices. The coating device shall be driven at a speed of between 60r/min and 100r/min until the number of revolutions R as specified in the relevant standard has been reached.
2. Specification
|
Rotating speed |
80±5r/min |
|
Test length |
500mm |
|
Rotate times |
1-999r settable |
|
Scraper |
Designed according to IEC60851-3 figure 7 |
|
Weight |
Includes hook 5N*1, 15N*1, 20N*1, 25N*1, 30N*1 |
|
Input power |
AC 220V±10% 50Hz |
|
Power consumption |
<150W |
|
Dimension and weight |
L1200*W2200*H3500mm/35KG |
3. Load for peel test
|
Nominal conductor diameter mm |
Load N |
|
|
Over |
Up to and including |
|
|
1.000 |
1.400 |
25 |
|
1.400 |
1.800 |
40 |
|
1.800 |
2.240 |
60 |
|
2.240 |
2.800 |
100 |
|
2.800 |
3.550 |
160 |
|
3.550 |
4.500 |
250 |
|
4.500 |
5.000 |
400 |
4. Picture
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2014
Ecer Certification：
Verified Supplier
Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...
Get in touch with us
Leave a Message, we will call you back quickly!