Full Hard 0.83mm Z150 Prepainted Steel Coil for Roofing and Structural Panels

Product Specification

Full Hard 0.83mm Z150 Prepainted Steel Coil for Roofing and Structural Panels

１．Product Overview

Full Hard 0.83mm Z150 Prepainted Steel Coil is a color coated galvanized steel coil used for roofing sheets, structural panels, flange plates, ship plates, container plates, and industrial building applications.

The product uses a galvanized substrate with 150g/m² zinc coating and a polyester paint system. The 0.83mm thickness supports applications requiring stronger panel rigidity, while the pre-painted surface provides corrosion protection, appearance consistency, and reduced secondary painting work during fabrication.

２．Technical Solution

The galvanized steel substrate provides corrosion protection through 150g/m² zinc coating. The top surface uses 15 Micron Polyester + 5 Micron Primer to improve surface appearance, adhesion, and weather resistance.

The back surface uses 7 Micron + 5 Micron Primer to improve reverse-side protection during storage, transportation, forming, and installation.

The full hard substrate is suitable for applications requiring higher stiffness and dimensional stability during roofing, structural panel, and container panel production.

３．Specifications

４．Application

• Roofing sheets for steel structure workshops
• Structural building panels
• Flange plate applications
• Ship plate applications
• Container plate applications
• Warehouse roofing panels
• Airport and storage building panels
• Vehicle manufacturing components
• Furniture panels
• Electric industry components

５．Processing

• Roll forming
• Roofing sheet production
• Structural panel fabrication
• Cut-to-length processing
• Slitting
• Bending
• Profiling
• Container panel forming
• Flange plate processing

６．Advantages

• 0.83mm thickness provides stronger rigidity for roofing and structural panel applications.
• 150g/m² zinc coating improves corrosion protection for building and industrial use.
• 15 Micron Polyester + 5 Micron Primer top surface supports coating adhesion and appearance stability.
• 7 Micron + 5 Micron Primer back surface improves reverse-side protection during handling and forming.
• RAL 7025 color supports consistent project appearance.
• 1500mm width supports wide panel processing and sheet fabrication.
• Standard export packing supports long-distance shipment and storage protection.

７．How to Choose

• Choose 0.83mm thickness when stronger panel stiffness is required.
• Select Z150 zinc coating for building and industrial applications requiring improved corrosion protection.
• Confirm RAL 7025 color before production to maintain project color consistency.
• For roofing and structural panels, verify profile design and forming equipment compatibility.
• For container or ship plate applications, confirm forming method, coating adhesion, and end-use exposure conditions.

８．FAQ

Q1．What is the specified thickness of this product?

The specified thickness is 0.83mm.

Q2．What is the zinc coating level?

The zinc coating is 150g/m².

Q3．What color is supplied?

The specified color is RAL 7025.

Q4．What coating structure is used?

The top surface uses 15 Micron Polyester + 5 Micron Primer, and the back surface uses 7 Micron + 5 Micron Primer.

Q5．What applications are suitable for this product?

It is suitable for roofing, structural panels, flange plates, ship plates, container plates, vehicle parts, furniture panels, and electric industry components.