Beijing Silk Road Enterprise Management Services Co., Ltd.
| Nominal Capacitance | 4.7uF |
| Operating Temperature | -40℃~+85℃ |
| Voltage Rating | 10V |
| Tolerance | ±20% |
| DC Resistance(DCR) | 5mΩ |
| Current Rating | 6A |
| Description | 4.7uF ±20% 5mΩ SMD-4P,2x1.2mm Feed Through Capacitors RoHS |
| Mfr. Part # | NFM21PC475B1A3D |
| Package | SMD-4P,2x1.2mm |
| Model Number | NFM21PC475B1A3D |
View Detail Information
Explore similar products
low voltage self healing parallel capacitor CHINT BZMJ 0.45 40 3 for power
CHINT BZMJ 0.45 50 3 capacitor designed to improve power factor and voltage in
Self Healing Low Voltage Parallel Capacitor CHINT BZMJ 0.4-20-3 with Corrosion
Low voltage parallel capacitor CHINT BZMJ 0.4 30 3 self healing capacitor for
Product Specification
| Nominal Capacitance | 4.7uF | Operating Temperature | -40℃~+85℃ |
| Voltage Rating | 10V | Tolerance | ±20% |
| DC Resistance(DCR) | 5mΩ | Current Rating | 6A |
| Description | 4.7uF ±20% 5mΩ SMD-4P,2x1.2mm Feed Through Capacitors RoHS | Mfr. Part # | NFM21PC475B1A3D |
| Package | SMD-4P,2x1.2mm | Model Number | NFM21PC475B1A3D |
The NFM21PC475B1A3 is a Large Current 3 Terminals Low ESL Chip Multilayer Ceramic Capacitor (EMIFIL) designed for general electronic equipment. It offers low ESL (Equivalent Series Inductance) and is suitable for applications requiring high current handling.
| Item | Specification | Test Method |
|---|---|---|
| Nominal Capacitance | 4.7 uF | Frequency : 1.00.1kHz (Cap.) Voltage : 10.2V(rms) |
| Capacitance Tolerance | 20 % | - |
| DC Rated Voltage | 10 V | - |
| Rated Current (DC) | 6A | - |
| DC Resistance | 5mmax. | Measured with 100mA max. |
| Insulation Resistance | 100Mmin. | Rated Voltage Time : 2 minutes max. |
| Operating /Storage Temp. Range | -40 to 85 C | - |
| Dimensions (L x W x T) | 2.00.2 x 1.250.1 x 0.850.1 mm | - |
| Terminal Dimensions (e x d) | 0.30.2 x 0.40.2 mm | - |
| Pitch (p) | 0.60.2 mm | - |
| Packaging Unit | 4000 pcs./Reel | - |
| Appearance | No defects or abnormalities. | Visual inspection. |
| Solderability | Electrodes shall be at least 90% covered with new solder coating. Products shall be no failure after tested. | Flux : Ethanol solution of rosin, 25(wt)% Pre-heat : 15010C, 60 to 90s Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 240 3C Immersion Time : 31 s Immersion and emersion rates : 25mm / s |
| Resistance to soldering heat | Appearance No damaged Cap. Change Within 7.5% DC Resistance 0.05max. | Flux : Ethanol solution of rosin, 25(wt)% Pre-heat : 15010C, 60 to 90s Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 270 5C Immersion Time : 10 1 s Immersion and emersion rates : 25mm / s |
| Bending Strength | Appearance No damaged Cap. Change Within 7.5% I.R. Meet the initial rated value. DC Resistance 0.05 max. | It shall be soldered on the glass-epoxy substrate (100401.0mm). Deflection : 2 mm Keeping Time : 30 s |
| Drop | Appearance No damaged Capacitance Meet the initial rated value. DC Resistance 0.05max. | It shall be dropped on concrete or steel board. Height : 75 cm Method : Free fall Attitude from which the product is dropped : 3 directions |
| Bonding Strength | - | It shall be soldered on the glass-epoxy substrate. Applying Force (F) : 9.8 N Applying Time : 30 s |
| Vibration | - | It shall be soldered on the glass-epoxy substrate. Oscillation Frequency : 10 to 55 to 10Hz for 1 minute Double Amplitude : 1.5 mm Time : A period of 2 hours in each of 3 mutually perpendicular directions. (Total 6 hours) Preconditioning : Heat treatment (150+0 / -10 C,1hour) |
| Temperature Cycling | Appearance No damaged Cap. Change Within 12.5% I.R. 50F min. DC Resistance 0.05max. | It shall be soldered on the glass-epoxy substrate. 1 Cycle 1 step : Minimum Operating Temperature +0 / -3 C / 30+3 / -0 min 2 step : Room Temperature / within 3 min 3 step : Maximum Operating Temperature +3 / -0 C / 30 +3 / -0 min 4 step : Room Temperature / within 3 min Total of 10 cycles |
| Humidity | Appearance No damaged Cap. Change Within 12.5% I.R. 50F min. DC Resistance 0.05max. | It shall be soldered on the glass-epoxy substrate. Temperature : 402C Humidity : 90 to 95%(RH) Time : 500+24 / -0 hours |
| Heat Life | Appearance No damaged Cap. Change Within 12.5% I.R. 50F min. DC Resistance 0.05max. | Temperature : Maximum Operating Temperature 2 C Test Voltage : Rated Voltage x 200% Charge Current : 50 mA max. Time : 1000+48 / -0 hours |
| Taping Specification | Packing quantity : 4000 pcs. / reel. Pull Strength of Top Tape and Bottom Tape : 5N min. Peeling off force of top tape : 0.1N to 0.6N (minimum value is typical) Speed of Peeling off : 300 mm / min | - |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!