Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -55℃~+125℃ |
| Nominal Capacitance | 220nF |
| Voltage Rating | 16V |
| Tolerance | ±20% |
| DC Resistance(DCR) | 30mΩ |
| Current Rating | 2A |
| Description | 220nF ±20% 30mΩ SMD-4P,2x1.2mm Feed Through Capacitors RoHS |
| Mfr. Part # | NFM21PC224R1C3D |
| Package | SMD-4P,2x1.2mm |
| Model Number | NFM21PC224R1C3D |
View Detail Information
Explore similar products
low voltage self healing parallel capacitor CHINT BZMJ 0.45 40 3 for power
CHINT BZMJ 0.45 50 3 capacitor designed to improve power factor and voltage in
Self Healing Low Voltage Parallel Capacitor CHINT BZMJ 0.4-20-3 with Corrosion
Low voltage parallel capacitor CHINT BZMJ 0.4 30 3 self healing capacitor for
Product Specification
| Operating Temperature | -55℃~+125℃ | Nominal Capacitance | 220nF |
| Voltage Rating | 16V | Tolerance | ±20% |
| DC Resistance(DCR) | 30mΩ | Current Rating | 2A |
| Description | 220nF ±20% 30mΩ SMD-4P,2x1.2mm Feed Through Capacitors RoHS | Mfr. Part # | NFM21PC224R1C3D |
| Package | SMD-4P,2x1.2mm | Model Number | NFM21PC224R1C3D |
The NFM21PC224R1C3 is a Large Current 3 Terminals Low ESL Chip Multilayer Ceramic Capacitor (EMIFIL) designed for general electronic equipment. It offers advantages such as low ESL and is suitable for applications requiring high reliability.
| Item | Specification | Test Method |
|---|---|---|
| Nominal Capacitance | 0.22 uF | |
| Capacitance Tolerance | ±20 % | |
| DC Rated Voltage | DC 16 V | |
| Rated Current (DC) | 2A | |
| DC Resistance | 30mΩmax. | Measured with 100mA max. |
| Insulation Resistance | 1000MΩmin. | |
| Operating Temperature Range | -55 to 125 °C | |
| Storage Temperature Range | -55 to 125 °C | |
| Dimensions (L x W x T) | 2.0±0.2 x 1.25±0.1 x 0.85±0.1 mm | |
| Dimensions (e.g., j, d, g) | j: 0.25±0.2, d: 0.3±0.2, g: 0.4±0.2 mm | |
| Capacitance Measurement | Frequency: 1.0±0.1kHz, Voltage: 1±0.2V(rms) | |
| Withstanding Voltage | Rated Voltage x 300% for 1 to 5 s | Charge Current: 50 mA max. |
| Appearance | No defects or abnormalities. | Visual inspection. |
| Dimensions Check | Within specified dimensions. | Using calipers. |
| Solderability | Electrodes shall be at least 90% covered with new solder coating. | Flux: Ethanol solution of rosin, 25(wt)%, Pre-heat: 150±10°C, 60 to 90s, Solder: Sn-3.0Ag-0.5Cu, Solder Temperature: 240 ± 3°C, Immersion Time: 3±1 s |
| Resistance to Soldering Heat | No failure after tested. Appearance No damaged, Cap. Change Within ±7.5%, DC Resistance 0.05Ωmax. | Flux: Ethanol solution of rosin, 25(wt)%, Pre-heat: 150±10°C, 60 to 90s, Solder: Sn-3.0Ag-0.5Cu, Solder Temperature: 270 ± 5°C, Immersion Time: 10 ± 1 s |
| Bending Strength | No damaged, Cap. Change Within ±7.5%, DC Resistance 0.05Ωmax. | Soldered on glass-epoxy substrate (100x40x1.0mm), Deflection: 2 mm, Keeping Time: 30 s |
| Drop | No damaged, Cap. Change Within ±7.5%, DC Resistance 0.05Ωmax. | Dropped on concrete or steel board, Height: 75 cm, Method: Free fall |
| Bonding Strength | No damaged, Capacitance Meet the initial rated value. | Soldered on glass-epoxy substrate, Applying Force (F): 9.8 N, Applying Time: 30 s |
| Vibration | No damaged, Capacitance Meet the initial rated value. | Soldered on glass-epoxy substrate, Oscillation Frequency: 10 to 55 to 10Hz for 1 minute, Double Amplitude: 1.5 mm |
| Temperature Cycling | Appearance No damaged, Cap. Change Within ±12.5%, I.R. 50Ω·F min., DC Resistance 0.05Ωmax. | 1 Cycle: Min Op Temp +0/-3°C (30+3/-0 min), Room Temp (within 3 min), Max Op Temp +3/-0°C (30+3/-0 min), Room Temp (within 3 min). Total 10 cycles. |
| Humidity | Appearance No damaged, Cap. Change Within ±12.5%, I.R. 50Ω·F min., DC Resistance 0.05Ωmax. | Temperature: 40±2°C, Humidity: 90 to 95%(RH), Time: 500+24/-0 hours |
| Heat Life | Appearance No damaged, Cap. Change Within ±12.5%, I.R. 50Ω·F min., DC Resistance 0.05Ωmax. | Temperature: Maximum Operating Temperature ± 2 °C, Test Voltage: Rated Voltage x 200%, Time: 1000+48/-0 hours |
| Packaging Unit | 4000 pcs./Reel | |
| Taping Specification | Sprocket holes to the right as tape is pulled toward user. Base tape and top tape have no spliced point. Cavity shall not have burr. Missing components number within 0.1% of reel count or 1 pc., whichever is greater, and not continuous. | |
| Pull Strength of Top Tape and Bottom Tape | 5N min. | |
| Peeling off force of top tape | 0.1N to 0.6N (minimum value is typical) | Speed of Peeling off: 300 mm / min |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!