| Operating Temperature | -55℃~+85℃ |
| Nominal Capacitance | 1.5uF |
| Voltage Rating | 25V |
| Tolerance | -20%~+50% |
| DC Resistance(DCR) | 9mΩ |
| Current Rating | 6A |
| Description | 1.5uF -20%~+50% 9mΩ 1806 Feed Through Capacitors RoHS |
| Mfr. Part # | NFM41PC155B1E3L |
| Package | 1806 |
| Model Number | NFM41PC155B1E3L |
View Detail Information
Explore similar products
low voltage self healing parallel capacitor CHINT BZMJ 0.45 40 3 for power
CHINT BZMJ 0.45 50 3 capacitor designed to improve power factor and voltage in
Self Healing Low Voltage Parallel Capacitor CHINT BZMJ 0.4-20-3 with Corrosion
Low voltage parallel capacitor CHINT BZMJ 0.4 30 3 self healing capacitor for
Product Specification
| Operating Temperature | -55℃~+85℃ | Nominal Capacitance | 1.5uF |
| Voltage Rating | 25V | Tolerance | -20%~+50% |
| DC Resistance(DCR) | 9mΩ | Current Rating | 6A |
| Description | 1.5uF -20%~+50% 9mΩ 1806 Feed Through Capacitors RoHS | Mfr. Part # | NFM41PC155B1E3L |
| Package | 1806 | Model Number | NFM41PC155B1E3L |
This product specification is applied to Large Current 3 Terminals Low ESL Chip Multilayer Ceramic Capacitors (EMIFIL) used for General Electronic equipment. These capacitors offer low ESL and are designed for general-purpose applications.
| Item | Specification | Test Method |
|---|---|---|
| Electrical Performance | ||
| Nominal Capacitance | 1.5 ±0.3 μF | Frequency : 1.0±0.1KHz (Cap.) Voltage : 1±0.2V(rms) |
| Capacitance Tolerance | ±20 % | - |
| DC Rated Voltage | DC 25 V | Rated Voltage Time : 2 minutes max. |
| Rated Current | 6A(DC) | - |
| DC Resistance | 9mΩmax. | Measured with 100mA max. |
| Insulation Resistance | 300MΩmin. | - |
| Withstanding Voltage | Products shall not be damaged. | Test Voltage : Rated voltage x 250% Time : 1 to 5 s Charge Current : 50mA max. |
| Operating Temperature | -55 to 85 ℃ | Shown in Rated value. Includes self-heating |
| Storage Temperature | -55 to 85 ℃ | Shown in Rated value. |
| Mechanical Performance | ||
| Appearance | No defects or abnormalities. | Visual inspection. |
| Dimensions | Within the specified dimensions. | Using Measuring instrument of dimension. |
| Solderability | Electrodes shall be at least 95% covered with new solder coating. | Flux : Solution of rosin ethanol 25(mass)% Pre-heat : 150±10℃, 60 to 90s Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 240±3℃ Immersion Time : 3±1s Immersion and emersion rates : 25mm/s |
| Resistance to soldering heat | Products shall be no failure after tested. | Flux : Solution of rosin ethanol 25(mass)% Pre-heat : 150±10℃, 60 to 90s Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 270±5℃ Immersion Time : 10±1s Immersion and emersion rates : 25mm/s |
| Bending Strength | Meet Table 2. | It shall be soldered on the glass-epoxy substrate(t = 1.0mm). Deflection : 2mm Keeping Time : 30s |
| Drop | The electrodes shall be no failure after tested. | It shall be dropped on concrete or steel board. Method : Free fall Height : 1m The Number of Time : Total 10 times |
| Bonding Strength | - | It shall be soldered on the glass-epoxy substrate. Applying Force (F) : 9.8N Applying Time : 30s |
| Vibration | Meet Table 3. | It shall be soldered on the glass-epoxy substrate. Oscillation Frequency : 10 to 2000 to 10Hz for 20 minute. Total amplitude : 1.5 mm or Acceleration amplitude 196m/s² whichever is smaller. Time: 4 hours of the 3 directions for each. |
| Environment Performance | ||
| Temperature Cycling | Meet Table 4. | 1 Cycle: -55+0/-3℃ / 30+3/-0 min, Room Temp. / within 3 min, +85+3/-0℃ / 30+3/-0 min, Room Temp. / within 3 min. Total of 10 cycles. |
| Humidity | Meet Table 5. | Temperature : 70±2℃ Humidity : 90 to 95%(RH) Time : 1000+48/-0 hours |
| Humidity Life | Meet Table 6. | Temperature : 70±2℃ Humidity : 90 to 95%(RH) Time : 500+24/-0 hours Test Voltage : Rated Voltage Test Current : Rated Current |
| Heat life | Meet Table 4. | Temperature : -85±2℃ Time : 1000+48/-0 hours Test Voltage : Rated Voltagex200% Test Current : Rated Current Change Current : 50A |
| Cold Resistance | Meet Table 6. | Temperature : -55±2℃ Time : 500+24/-0 hours |
| Dimensions (Unit:mm) | ||
| L | 1.5±0.3 | - |
| W | 1.6±0.3 | - |
| T | 1.0±0.2 | - |
| e | 0.4±0.3 | - |
| f | 0.7 min. | - |
| Packaging Code | 1E3 L | - |
Unless otherwise specified
Temperature : Ordinary Temp. / 15 ℃ to 35 ℃
Humidity: Ordinary Humidity / 25 %(RH) to 85 %(RH)
Atmospheric pressure: 86 kPa to 106 kPa
In case of doubt
Temperature: 20 ℃ ± 2 ℃
Humidity: 60 %(RH) to 70 %(RH)
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification:
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!