Beijing Silk Road Enterprise Management Services Co., Ltd.
| Nominal Capacitance | 220nF |
| Operating Temperature | -55℃~+105℃ |
| Voltage Rating | 6.3V |
| Tolerance | ±20% |
| DC Resistance(DCR) | 30mΩ |
| Current Rating | 2A |
| Description | 220nF ±20% 30mΩ 0402 Feed Through Capacitors RoHS |
| Mfr. Part # | NFM15PC224D0J3D |
| Package | 0402 |
| Model Number | NFM15PC224D0J3D |
View Detail Information
Explore similar products
low voltage self healing parallel capacitor CHINT BZMJ 0.45 40 3 for power
CHINT BZMJ 0.45 50 3 capacitor designed to improve power factor and voltage in
Self Healing Low Voltage Parallel Capacitor CHINT BZMJ 0.4-20-3 with Corrosion
Low voltage parallel capacitor CHINT BZMJ 0.4 30 3 self healing capacitor for
Product Specification
| Nominal Capacitance | 220nF | Operating Temperature | -55℃~+105℃ |
| Voltage Rating | 6.3V | Tolerance | ±20% |
| DC Resistance(DCR) | 30mΩ | Current Rating | 2A |
| Description | 220nF ±20% 30mΩ 0402 Feed Through Capacitors RoHS | Mfr. Part # | NFM15PC224D0J3D |
| Package | 0402 | Model Number | NFM15PC224D0J3D |
This product specification applies to Large Current 3 Terminals Low ESL Chip Multilayer Ceramic Capacitors (EMIFIL) for General Electronic Equipment. These capacitors offer low ESL and are designed for general-purpose applications.
| Item | Specification | Test Method |
| Electrical Performance | ||
| Nominal Capacitance | 0.22 uF | Frequency : 1.0±0.1kHz (Cap.) Voltage : 1V±0.2V(rms) |
| Capacitance Tolerance | ±20 % | |
| DC Rated Voltage | DC 6.3 V | Time : 2 minutes max. |
| Rated Current | 2A(DC) | |
| DC Resistance | 30mΩmax. | Measured with 100mA max. |
| Insulation Resistance | 1000MΩmin. | Voltage : Rated Voltage x 300% Time : 1 to 5 s Charge Current : 50 mA max. |
| Operating /Storage Temp. Range | -55 to 105 °C | |
| Mechanical Performance | ||
| Appearance | No defects or abnormalities. | Visual inspection. |
| Dimensions | Refer to drawing (Unit:mm) | Using calipers. |
| Solderability | Electrodes shall be at least 90% covered with new solder coating. Products shall be no failure after tested. | Flux : Ethanol solution of rosin, 25(wt)% Pre-heat : 150±10°C, 60 to 90s Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 240 ± 3°C Immersion Time : 3±1 s Immersion and emersion rates : 25mm / s |
| Resistance to soldering heat | Electrodes shall be no failure after tested. | Flux : Ethanol solution of rosin, 25(wt)% Pre-heat : 150±10°C, 60 to 90s Solder : Sn-3.0Ag-0.5Cu Solder Temperature : 270 ± 5°C Immersion Time : 10 ± 1 s Immersion and emersion rates : 25mm / s |
| Bending Strength | Deflection : 1.0 mm | It shall be soldered on the glass-epoxy substrate (100×40×0.8mm). Deflection : 1.0 mm Keeping Time : 5 s |
| Drop | It shall be dropped on concrete or steel board. | Height : 1m Method : Free fall Attitude from which the product is dropped : 3 directions |
| Bonding Strength | Applying Force (F) : 5 N | It shall be soldered on the glass-epoxy substrate. Applying Force (F) : 5 N Applying Time : 5 s |
| Vibration | Total amplitude 3.0 mm or Acceleration amplitude 196m/s² whichever is smaller. | It shall be soldered on the glass-epoxy substrate. Oscillation Frequency : 10 to 2000 to 10Hz for 20 minute. Total amplitude 3.0 mm or Acceleration amplitude 196m/s² whichever is smaller. Time : A period of 2 hours in each of 3 mutually perpendicular directions. (Total 6 hours) |
| Environmental Performance | ||
| Temperature Cycling | 1 Cycle | It shall be soldered on the glass-epoxy substrate. 1 Cycle 1 step : Minimum Operating Temperature +0 / -3°C / 30+3 / -0 min 2 step : Room Temperature / within 3 min 3 step : Maximum Operating Temperature +3 / -0°C / 30 +3 / -0 min 4 step : Room Temperature / within 3 min Total of 10 cycles |
| Humidity | Temperature : 40±2°C Humidity : 90 to 95%(RH) Time : 500+24 / -0 hours | It shall be soldered on the glass-epoxy substrate. Temperature : 40±2°C Humidity : 90 to 95%(RH) Time : 500+24 / -0 hours |
| Heat Life | Temperature : Maximum Operating Temperature ± 2 °C Test Voltage : Rated Voltage x 150% Time : 1000+48 / -0 hours | Temperature : Maximum Operating Temperature ± 2 °C Test Voltage : Rated Voltage x 150% Charge Current : 50 mA max. Time : 1000+48 / -0 hours |
| Dimensions (in mm) | ||
| L | 1.0±0.1 | |
| W | 0.5±0.2 | |
| T | 0.4±0.1 | |
| e | 0.17±0.1 | |
| g | 0.1 min. | |
| D | 0.35±0.1 | |
| f | 0.15±0.1 | |
| Packaging | ||
| Packaging Code | 0J3 | |
| Unit | (7) | |
| Reel | W8P2 180mm Reel PAPER | |
| Quantity | 10000 pcs./Reel | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!