Beijing Silk Road Enterprise Management Services Co., Ltd.
| Operating Temperature | -55℃~+125℃ |
| Nominal Capacitance | 22nF |
| Voltage Rating | 16V |
| Tolerance | ±20% |
| DC Resistance(DCR) | 50mΩ |
| Current Rating | 1A |
| Description | 22nF ±20% 50mΩ SMD-3P,1.6x0.8mm Feed Through Capacitors RoHS |
| Mfr. Part # | NFM18CC223R1C3D |
| Package | SMD-3P,1.6x0.8mm |
| Model Number | NFM18CC223R1C3D |
View Detail Information
Explore similar products
low voltage self healing parallel capacitor CHINT BZMJ 0.45 40 3 for power
CHINT BZMJ 0.45 50 3 capacitor designed to improve power factor and voltage in
Self Healing Low Voltage Parallel Capacitor CHINT BZMJ 0.4-20-3 with Corrosion
Low voltage parallel capacitor CHINT BZMJ 0.4 30 3 self healing capacitor for
Product Specification
| Operating Temperature | -55℃~+125℃ | Nominal Capacitance | 22nF |
| Voltage Rating | 16V | Tolerance | ±20% |
| DC Resistance(DCR) | 50mΩ | Current Rating | 1A |
| Description | 22nF ±20% 50mΩ SMD-3P,1.6x0.8mm Feed Through Capacitors RoHS | Mfr. Part # | NFM18CC223R1C3D |
| Package | SMD-3P,1.6x0.8mm | Model Number | NFM18CC223R1C3D |
The NFM18CC223R1C3 is a Chip EMIFIL Chip 3-terminal Capacitor designed for general electronic equipment. It offers reliable performance with specific electrical, mechanical, and environmental characteristics.
| Item | Nominal Capacitance | Capacitance Tolerance | DC Rated Voltage | DC Resistance | Insulation Resistance | Rated Current | Operating Temp. Range | Dimensions (LxWxT) |
| NFM18CC223R1C3 | 22000 pF | 20 % | DC 16 V | 50mmax. | 1000Mmin. | 1A(DC) | -55 to 125 C | 1.60.1 x 0.80.1 x 0.60.1 mm |
| Item | Specification | Test Method |
| Capacitance | 22000 pF | Frequency: 10.1kHz, Voltage: 10.2V(rms) |
| DC Resistance (Rdc1, Rdc2) | Rdc1,2: 0.05 max. (for 22000pF) | Measured with 100mA max. |
| Withstanding Voltage | Products shall not be damaged. | Test Voltage: Rated Voltage x 300%, Time: 1 to 5 s |
| Operating Temperature | -55 to 125 C | Shown in Rated value. Includes self-heating |
| Storage Temperature | -55 to 125 C | Shown in Rated value. |
| Item | Specification | Test Method |
| Appearance | No defects or abnormalities. | Visual inspection. |
| Dimensions | Within the specified dimensions. | Using calipers or Micrometer. |
| Solderability | Electrodes shall be at least 90% covered with new solder coating. | Flux: Ethanol solution of rosin, 25(wt)%, Pre-heat: 15010C, 60 to 90s, Solder: Sn-3.0Ag-0.5Cu, Solder Temp: 240 3C, Immersion Time: 31 s |
| Resistance to soldering heat | Cap. Change Within 7.5%, Rdc 1,2: 0.05 max. (for 22000pF) | Flux: Ethanol solution of rosin, 25(wt)%, Pre-heat: 15010C, 60 to 90s, Solder: Sn-3.0Ag-0.5Cu, Solder Temp: 270 5C, Immersion Time: 10 1 s |
| Bending Strength | Deflection: 2 mm | It shall be soldered on the glass-epoxy substrate(t = 1.0mm). |
| Drop | Products shall be no failure after tested. | Free fall, Height: 1 m, 3 directions |
| Bonding Strength | F: 9.8 N | It shall be soldered on the glass-epoxy substrate. |
| Vibration | Cap. Change Within 7.5%, Rdc 1,2: 0.05 max. (for 22000pF) | Soldered on glass-epoxy substrate. Frequency: 10 to 2000 to 10Hz for 20 minutes. Total amplitude 1.5 mm or Acceleration amplitude 196m/s2 whichever is smaller. Time: 2 hours in each of 3 directions. |
| Item | Specification | Test Method |
| Temperature Cycling | Cap. Change Within 7.5%, I.R. Meet the initial rated value. Rdc 1,2: 0.05 max. (for 22000pF) | 10 cycles: -55C to +125C. |
| Humidity | Cap. Change Within 12.5%, I.R. Meet the initial rated value. Rdc 1,2: 0.05 max. (for 22000pF) | Temperature: 402C, Humidity: 90 to 95%(RH), Time: 500+24 / -0 hours |
| Heat Life | Cap. Change Within 12.5%, I.R. Meet the initial rated value. Rdc 1,2: 0.05 max. (for 22000pF) | Temperature: 1252C, Test Voltage: Rated Voltage x 200%, Time: 1000+48 / -0 hours |
| Cold Resistance | Cap. Change Within 12.5%, I.R. Meet the initial rated value. Rdc 1,2: 0.05 max. (for 22000pF) | Temperature: -552C, Time: 500+24 / -0 hours |
| Item | Specification |
| Packaging Code | R1C3 |
| Unit | 180mm Reel PAPER W8P4 |
| Quantity per Reel | 4000 pcs. |
| Leader-trailer Tape | Empty tape, 190 min. (Leader), 160 min. (Trailer) |
| Pull Strength of Top Tape | 5Nmin. |
| Peeling off force of top tape | 0.1N to 0.6N |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!