Beijing Silk Road Enterprise Management Services Co., Ltd.
| Description | Through Hole,P=15mm Thin Film Capacitors RoHS |
| Mfr. Part # | MPE155J2SD06HC0300R |
| Package | Through Hole,P=15mm |
| Model Number | MPE155J2SD06HC0300R |
View Detail Information
Explore similar products
Capacitor Jimson MRC224K300A06 offering non inductive high pulse resistor for
Durable JOEY MEF104K2G6AS6036A1 electronic part designed for seamless integratio
Metallized Polyester Film Capacitor for Coupling and Filtering WALSON C212A10356
capacitor Jimson MKP224K275A08 designed for transient endurance and long term
Product Specification
| Description | Through Hole,P=15mm Thin Film Capacitors RoHS | Mfr. Part # | MPE155J2SD06HC0300R |
| Package | Through Hole,P=15mm | Model Number | MPE155J2SD06HC0300R |
The CL21(H)/MPE series capacitors are epoxy-encapsulated metallized polyester film capacitors designed for DC filtering applications such as PFC and DC link in electronic equipment. They feature a non-inductive wound structure, small size, good self-healing properties, and are coated with flame-retardant epoxy resin powder. These capacitors are widely used in LED drivers, switching power supplies, electronic ballasts, and inverters.
| Product Code | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dielectric Loss (DF) (1KHz, %) | Dimensions (mm) W*H*T | Lead Pitch (mm) | Lead Type | Environmental Requirements |
|---|---|---|---|---|---|---|---|---|
| MPE155J2SD06HC0300R | 1.5 | 5% | 450 | 1.0 | 16.5*16.5*6.0 | 15.0 | P=15, L=3 | RoHS, REACH |
| Parameter | Specification | Test Method |
|---|---|---|
| Climate Category | 55/125/21 | |
| Operating Temperature Range | -55~+125 | (+85~+125: rated voltage derating 1.25% / ) |
| Rated Temperature | 85 | |
| Capacitance Range | 0.01F10F | |
| Capacitance Tolerance | 5%(J), 10%(K), 20%(M) | |
| Rated Voltage | 250V, 400/450Vdc, 500/520Vdc, 630Vdc | |
| Dissipation Factor (DF) | 0.01 (1kHz, 20) | GB 7332, IEC60384-2 |
| Insulation Resistance | 10,000M for C0.33uF (100VDC, 60s) | |
| 5000M*uF for C>0.33uF (100VDC, 60s) | ||
| Withstand Voltage | 1.6UR(VDC), 5s | |
| Max Pulse Rise Rate (dV/dt) | See table in source | If actual working voltage (U) is lower than rated voltage (UR), dV/dt allowed value should be multiplied by UR/U |
| Terminal Strength (Tensile) | 10N, 10s | No visible mechanical damage |
| Terminal Strength (Bending) | 5N, 902 times | For 0.6 & 0.8mm wire diameter |
| Solderability | 95% tinning rate | Flux temp: 2455, Immersion time: 2.50.5s |
| Solder Heat Resistance | Appearance: No visible damage | Solder temp: 2605, Immersion time: 101s, Recovery time: 1~2h |
| DF increase 0.005 (C1.0F, 10kHz) / 0.003 (C>1.0F, 1kHz) | ||
| Capacitance change C/C2% | ||
| Rapid Temperature Change | Appearance: No visible damage | A=-40, B=+105, 5 cycles, t=30min |
| Vibration | Appearance: No visible damage | Amplitude 0.75mm or acceleration 98m/s, 10-500Hz, 3 directions, 2h each, total 6h |
| Shock | Appearance: No visible damage | 4000 times, acceleration 390m/s, pulse duration: 6ms |
| Final Measurement (after Shock/Vibration) | Appearance: No visible damage | |
| Capacitance change C/C5% | ||
| DF increase 0.003 (C1.0F, 10kHz) / 0.002 (C>1.0F, 1kHz) | ||
| Insulation Resistance IR/IR50% | ||
| Sequential Humidity Test | Appearance: No visible damage | Dry Heat +105, 16h; Cyclic Damp Heat (Test Db, 1st cycle); Cold -40, 2h; Low Pressure 8.5kPa, 1h; Cyclic Damp Heat (Test Db, remaining cycles) |
| Capacitance change C/C5% | ||
| DF increase 0.005 (C1.0F, 10kHz) / 0.003 (C>1.0F, 1kHz) | ||
| Insulation Resistance IR/IR50% | ||
| Steady State Damp Heat | Appearance: No visible damage | RH 90-95%, 402, 21 days, Recovery time: 1~2h |
| Capacitance change C/C5% | ||
| DF increase 0.005 | ||
| Insulation Resistance IR/IR50% | ||
| Endurance | Appearance: No visible damage | T=85, 1000h, Voltage: 1.25UR |
| Capacitance change C/C8% | ||
| DF increase 0.003 (C1.0F, 10kHz) / 0.002 (C>1.0F, 1kHz) | ||
| Insulation Resistance IR/IR50% | ||
| Characteristics Dependent on Temperature | See table in source | Static method, capacitor held sequentially at specified temperatures (-40, +20, +105) |
| Charge/Discharge | Capacitance change C/C5% | 10,000 cycles, Charge time: 0.5s, Discharge time: 0.5s, Charge voltage: UR, Charge resistance: 220/CR (), Discharge resistance: 10/CR or 20 (whichever is greater) |
| DF increase 0.003 (10KHz, CR1.0uF) / 0.002 (1KHz, CR>1.0uF) | ||
| Insulation Resistance IR/IR50% |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!