Beijing Silk Road Enterprise Management Services Co., Ltd.
| Description | Through Hole,P=7.5mm Thin Film Capacitors RoHS |
| Mfr. Part # | MPE224J2GB050C030ZR |
| Package | Through Hole,P=7.5mm |
| Model Number | MPE224J2GB050C030ZR |
View Detail Information
Explore similar products
Capacitor Jimson MRC224K300A06 offering non inductive high pulse resistor for
Durable JOEY MEF104K2G6AS6036A1 electronic part designed for seamless integratio
Metallized Polyester Film Capacitor for Coupling and Filtering WALSON C212A10356
capacitor Jimson MKP224K275A08 designed for transient endurance and long term
Product Specification
| Description | Through Hole,P=7.5mm Thin Film Capacitors RoHS | Mfr. Part # | MPE224J2GB050C030ZR |
| Package | Through Hole,P=7.5mm | Model Number | MPE224J2GB050C030ZR |
The CL21/MPE series capacitors are epoxy encapsulated, metallized polyester film capacitors with a non-inductive winding structure. They are designed for use in electronic equipment, particularly in DC, pulse, and switching circuits, as well as in DC filtering circuits for electronic ballasts and inverters. Key features include small size, good self-healing properties, and flame-retardant epoxy resin powder coating.
| Item | Specification | Test Method |
| Climate Category | 55/105/21 | |
| Operating Temperature Range | -55~+105 (Voltage derating of 1.25% / for +85~+105) | |
| Rated Temperature | 85 | |
| Capacitance Range | 0.01F10F | |
| Capacitance Tolerance | 5%(K), 10%(K), 20%(M) | |
| Rated Voltage (VDC) | 63, 100, 160, 250, 400, 630 | |
| Dissipation Factor (DF) (1kHz, 20) | 0.01 | GB 7332, IEC60384-2 |
| Insulation Resistance (10VDC, 60s) | 3750M for C0.33uF; 1250M*uF for C>0.33uF (for U100VDC) | |
| Insulation Resistance (100VDC, 60s) | 7500M for C0.33uF; 2500M*uF for C>0.33uF (for U>100VDC) | |
| Dielectric Strength | 1.6UR(VDC), 5 seconds | |
| Terminal Strength (Tensile) | No visible mechanical damage, 10N, 10 seconds (for 0.6 & 0.8mm wires) | |
| Terminal Strength (Bending) | No visible mechanical damage, 5N, 902 times (for 0.6 & 0.8mm wires) | |
| Solderability | 95% tinning rate on leads | Flux Temp: 2455, Immersion Time: 2.50.5s |
| Solder Heat Resistance | Appearance: No visible damage; DF increase 0.005 (C1.0F, 10kHz) or 0.003 (C>1.0F, 1kHz); Capacitance change C/C2% | Solder Temp: 2605, Immersion Time: 101s, Recovery Time: 1~2 hours |
| Rapid Temperature Change | Appearance: No visible damage | A=-40, B=+105, 5 cycles, 30min duration each |
| Vibration | Appearance: No visible damage | Amplitude 0.75mm or Accel. 98m/s, 10-500Hz, 2h/direction, 3 directions (total 6h) |
| Shock | Appearance: No visible damage | 4000 times, Accel. 390m/s, Pulse Duration: 6ms |
| Climatic Sequence | Appearance: No visible damage; Capacitance change C/C5%; DF increase 0.005 (C1.0F, 10kHz) or 0.003 (C>1.0F, 1kHz); Insulation Resistance IR/IR50% | Dry Heat +105, 16h; Cyclic Damp Heat (Test Db, 1st cycle); Cold -40, 2h; Low Pressure 8.5kPa, 1h; Cyclic Damp Heat (Test Db, remaining cycles) |
| Steady State Damp Heat | Appearance: No visible damage; Capacitance change C/C5%; DF increase 0.005; Insulation Resistance IR/IR50% | RH 90-95%, Temp: 402, 21 days, No load, Recovery Time: 1~2 hours |
| Endurance | Appearance: No visible damage; Capacitance change C/C8%; DF increase 0.003 (C1.0F, 10kHz) or 0.002 (C>1.0F, 1kHz); Insulation Resistance IR/IR50% | T=85, 1000 hours, Applied Voltage: 1.25UR |
| Characteristics vs. Temperature | Capacitance change at lower category temp (-40): 0(Cb-Cd)/Cd+3%; Capacitance change at upper category temp (105): -4.0%(Cf-Cd)/Cd0 | Static method, holding at specified temperatures (a, b, d, f, g) |
| Charge/Discharge | Capacitance change C/C5%; DF increase 0.003 (10KHz, CR1.0uF) or 0.002 (1KHz, CR>1.0uF); Insulation Resistance IR/IR50% | 10,000 cycles, Charge time: 0.5s, Discharge time: 0.5s, Charge Voltage: UR, Charge Resistance: 220/CR (), Discharge Resistance: 10/CR or 20 (whichever is greater) |
| Soldering Temperature (Wave Soldering) | Tp125 (120s); Ts160 (45s) | Tp: Preheating section max temp; Ts: Max temp of component body during wave soldering |
| Soldering Temperature (Soldering Iron) | Tip temp 350, time 3 seconds |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!