Beijing Silk Road Enterprise Management Services Co., Ltd.
| Description | Through Hole,P=5mm Thin Film Capacitors RoHS |
| Mfr. Part # | MPE683J2EM040B200ZR |
| Package | Through Hole,P=5mm |
| Model Number | MPE683J2EM040B200ZR |
View Detail Information
Explore similar products
Capacitor Jimson MRC224K300A06 offering non inductive high pulse resistor for
Durable JOEY MEF104K2G6AS6036A1 electronic part designed for seamless integratio
Metallized Polyester Film Capacitor for Coupling and Filtering WALSON C212A10356
capacitor Jimson MKP224K275A08 designed for transient endurance and long term
Product Specification
| Description | Through Hole,P=5mm Thin Film Capacitors RoHS | Mfr. Part # | MPE683J2EM040B200ZR |
| Package | Through Hole,P=5mm | Model Number | MPE683J2EM040B200ZR |
The CL21/MPE series capacitors are epoxy-encapsulated, metallized polyester film capacitors designed for electronic equipment. They feature a non-inductive winding structure with tin-plated copper-clad steel leads. These capacitors are widely used in DC, pulse, and switching circuits, as well as in electronic ballasts and frequency converters for DC filtering.
| Product Code | Capacitance (uF) | Tolerance (%) | Rated Voltage (V.dc) | Dimensions (mm) (W*H*T) | Lead Spacing (mm) | Dissipation Factor (DF) (1KHz) | Insulation Resistance (M*uF) | Max. Pulse Rise Time (dV/dt) (V/s) |
|---|---|---|---|---|---|---|---|---|
| MPE683J2EM040B200ZR | 0.068 | 5 | 250 | 6.5*6*4 | 5.0 | 1.0 (max) | 1250 (for C>0.33uF) | See detailed table in source |
| Parameter | Specification |
|---|---|
| Climate Category | 55/105/21 |
| Operating Temperature Range | -55 to +105 (with derating above 85) |
| Rated Temperature | 85 |
| Capacitance Range | 0.01F to 10F |
| Capacitance Tolerance | 5% (K), 10% (K), 20% (M) |
| Rated Voltage | 63Vdc, 100Vdc, 160Vdc, 250Vdc, 400Vdc, 630Vdc |
| Dissipation Factor (DF) | 0.01 (1kHz, 20) |
| Insulation Resistance (U100VDC) | 3750M for C0.33uF (10VDC, 60s); 1250M*uF for C>0.33uF (10VDC, 60s) |
| Insulation Resistance (U>100VDC) | 7500M for C0.33uF (100VDC, 60s); 2500M*uF for C>0.33uF (100VDC, 60s) |
| Withstand Voltage | 1.6 UR(VDC), 5 seconds |
| No. | Main Material | Description | Remarks |
|---|---|---|---|
| 1 | Metallized Polyester Film | MPEA | -/- |
| 2 | Sprayed Metal Layer | Zinc-tin alloy wire | -/- |
| 3 | Lead Wire | Tin-plated copper-clad steel wire | -/- |
| 4 | Outer Encapsulation Material | Epoxy resin powder | Flame retardant UL94V-0 |
| 5 | Inner Protective Material | Epoxy resin | - |
Inner box dimensions: 34.5*23.5*24.5 cm (L*W*H)
Outer box dimensions: 49*36*27 cm (L*W*H)
Packaging includes: manufacturer part number, package count, Lot No., moisture-proof and dust-proof PVC bags, RoHS environmental mark, and other customer-specified markings.
Temperature: Max 35
Relative Humidity: Max 80%
Storage time: Max 12 months from the production date marked on the packaging bag.
Usage Range: Do not exceed the upper category temperature, avoid overload, and do not exceed the maximum pulse current.
Operation Precautions: Avoid repeated squeezing at the lead wire root, pay attention to the lead wire tip.
Soldering: For wave soldering, TP 125 for 120 seconds, Ts 160 for 45 seconds. For soldering iron, tip temperature not exceeding 350 for not more than 3 seconds. Not suitable for reflow soldering.
Typical values are tested under sinusoidal voltage, ambient temperature 85, and internal temperature rise T=15.
| No. | Item | Characteristic | Test Method |
|---|---|---|---|
| 1 | Terminal Strength | Tensile Strength | No visible mechanical damage. Wire diameter: 0.6 & 0.8mm. Load: 10N, Time: 10 seconds. |
| Bending Strength | Wire diameter: 0.6 & 0.8mm. Force: 5N, 902 times. | ||
| Solderability | Tinning rate of leads 95%. Soldering temperature: 2455. Immersion time: 2.50.5 seconds. | ||
| 2 | Solder Heat Resistance | Appearance | No visible damage. Soldering temperature: 2605. Immersion time: 101 seconds. Recovery time: 1-2 hours. |
| DF Increase | 0.005 (C1.0F, 10kHz); 0.003 (C>1.0F, 1kHz) | ||
| Capacitance Change | C/C 2% | ||
| Initial Measurement | Capacitance (1KHz), DF | CR1F: Test frequency 10kHz. CR>1F: Test frequency 1kHz. | |
| 3 | Temperature Rapid Change | Appearance | No visible damage. A=-40, B=+105, 5 cycles. Duration: t=30min. |
| Vibration | No visible damage. Amplitude 0.75mm or acceleration 98m/s (whichever is smaller), frequency 10-500Hz, three directions, 2h per direction, total 6h. | ||
| Shock | No visible damage. 4000 times, acceleration 390m/s, pulse duration: 6ms. | ||
| Final Measurement | Appearance, Capacitance Change (C/C5%), DF Increase (0.003 for C1.0F, 0.002 for C>1.0F), Insulation Resistance (IR/IR50%) | - | |
| Initial Measurement | Capacitance (1KHz), DF | CR1F: Test frequency 10kHz. CR>1F: Test frequency 1kHz. | |
| 4 | Climatic Sequence | Appearance | No visible damage. Dry Heat +105, 16 hours. Cyclic Damp Heat, Test Db, first cycle. Cold -40, 2 hours. Low Pressure 8.5kPa, 1 hour. Cyclic Damp Heat, Test Db, remaining cycles. |
| Low Pressure | No permanent breakdown, arcing or harmful deformation of the casing. | - | |
| Final Measurement | Appearance, Capacitance Change (C/C5%), DF Increase (0.005 for C1.0F, 0.003 for C>1.0F), Insulation Resistance (IR/IR50%) | - | |
| Initial Measurement | Capacitance (1KHz), DF | CR1F: Test frequency 10kHz. CR>1F: Test frequency 1kHz. | |
| 5 | Damp Heat Steady State | Appearance | No visible damage. Relative Humidity 90-95%RH, Temperature: 402, no load, duration: 21 days. Recovery time: 1-2 hours. |
| Capacitance Change | C/C 5% | - | |
| DF Increase | 0.005 | - | |
| Insulation Resistance | IR/IR 50% | - | |
| 6 | Endurance | Appearance | No visible damage. T=85, 1000 hours. Applied voltage: 1.25UR. |
| Capacitance Change | C/C 8% | - | |
| DF Increase | 0.003 (C1.0F, 10kHz); 0.002 (C>1.0F, 1kHz) | - | |
| Insulation Resistance | IR/IR 50% | - | |
| 7 | Characteristics Dependent on Temperature | Characteristics at lower category temperature -40: 0 (Cb-Cd)/Cd +3% | Static method, capacitors sequentially held at each temperature: a.(202), b.(-403), d.(20 2), f.(1052), g.(202). |
| Characteristics at upper category temperature 105: -4.0% (Cf-Cd)/Cd 0 | - | ||
| 8 | Charge/Discharge | Capacitance Change | C/C 5% |
| DF Increase | 0.003 (10KHz, CR1.0uF); 0.002 (1KHz, CR>1.0uF) | ||
| Insulation Resistance | IR/IR 50% | Charge/discharge cycles: 10,000. Charge time: 0.5s. Discharge time: 0.5s. Charge voltage: Rated voltage UR. Charge resistance: 220/CR (). Discharge resistance: 10/CR or 20 (whichever is larger). CR: Rated capacitance (uF). |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!