Beijing Silk Road Enterprise Management Services Co., Ltd.
| Tolerance | ±10% |
| Voltage Rating | 400V |
| Capacitance | 100nF |
| Dielectric Material | Polyester |
| Description | 100nF ±10% 400V Film Capacitor Polyester Through Hole P=15mm |
| Mfr. Part # | MEC-400VAC104K |
| Package | Through Hole,P=15mm |
| Model Number | MEC-400VAC104K |
View Detail Information
Explore similar products
Capacitor Jimson MRC224K300A06 offering non inductive high pulse resistor for
Durable JOEY MEF104K2G6AS6036A1 electronic part designed for seamless integratio
Metallized Polyester Film Capacitor for Coupling and Filtering WALSON C212A10356
capacitor Jimson MKP224K275A08 designed for transient endurance and long term
Product Specification
| Tolerance | ±10% | Voltage Rating | 400V |
| Capacitance | 100nF | Dielectric Material | Polyester |
| Description | 100nF ±10% 400V Film Capacitor Polyester Through Hole P=15mm | Mfr. Part # | MEC-400VAC104K |
| Package | Through Hole,P=15mm | Model Number | MEC-400VAC104K |
This specification details the MEC series capacitor from JIMSON ELECTRONICS (XIAMEN) CO.,LTD. It is a 0.1uF, 400VAC capacitor designed for coupling, filtering, noise suppression, and by-passing in DC and pulse circuits for both investment and consumer electronics. Key advantages include small size, low loss, good stability, and excellent self-healing properties for long life.
| Specification | Description | Value | Test Conditions |
| Capacitance | Rated Capacitance | 0.1uF | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. |
| Capacitance Tolerance | Capacity Error | K=10% | |
| Voltage | Rated Voltage | 400VAC | |
| Voltage Proof | Withstand Voltage | 1.6*UR Unit:VDC (1 minute at 20) | No permanent breakdown or arcing |
| Dissipation Factor | Loss Tangent | DF1.0% | Measuring frequency: 1kHz10%, Measuring voltage: 1Vrms.max. |
| Insulation Resistance | IR | C0.33uF IR5000M, C0.33uF IR*C3000S | Measured at rated voltage or less than 100VDC, 1 minute at 20and RH65% |
| Endurance | Durability | C/C5%; DF0.20% | 1000 hours with 125% of rated voltage at 105. After the test: C0.1uF IR9000 M, C1uF IR 50%of the specified value. |
| Climatic Catalogue | Climate Category | 40/105/21 | |
| Solderability | Wettability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355, Bath time: 2.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body |
| Heat Shock | Resistance to Soldering Heat | C/C5% DF1.2* | Solder bath: 2605, Bath time: 5.00.5 sec, Speed: 256 mm/sec, Depth: 1.5+0.5/-0mm from the bottom of the body. Capacitor appearance should be free from visible damage after test. |
| Lead Tensile Strength | Pin Tensile Strength | Appearance without damage | Pull: 2.2 LBS, Time: 5 sec |
| Lead Bending Strength | Pin Bending Strength | Appearance without damage | Load of lead: 1.1 LBS. The body of capacitor is bent 90 degrees and returned to its original position. |
| Vibration | Vibration Resistance | Appearance without visible damage | Frequency cycle: from 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction with a total of 6 hours. |
| Reference Standard | Cited Standard | IEC60384-2, GB7322 | |
| Construction | Dielectric | Polyester film | |
| Construction | Electrodes | Vacuum evaporated metal | |
| Construction | Coating | Encapsulated in reinforced flame retardant plastic case sealed with epoxy resin meeting the requirement of UL94V-0 | |
| Construction | Leads | Radial leads of tinned wire | |
| Construction | Terminal Contact | Electrically welded | |
| Features | Small size, Low loss and good stability, Long life due to excellent self-healing | ||
| Application | Widely used in coupling, filter, noise-supperssion, by-passing of DC and pulse circuits in all kinds of machines | ||
| Marking | On Capacitor | Rated capacitance, Rated voltage, Capacitance tolerance, Manufacturer's symbol (JIMSON (JS)) | |
| Marking | On Package | Product type, rating, quantity, date of manufacture, location of manufacture, manufacturer's name | |
| Dimensions | W | 18.0 0.5 mm | |
| Dimensions | H | 13.5 0.5 mm | |
| Dimensions | T | 7.5 0.5 mm | |
| Dimensions | P | 15.0 1.0 mm | |
| Dimensions | D | 0.8 0.05 mm | |
| Dimensions | L | 25.0 5.0 mm | |
| Soldering Suggestion | Maximum Soldering Temperature | 270 | Pre-heating: 105 1min, Soldering: 4S |
| Storage Environment | Temperature | 30 | MBB not open: 24 months storage |
| Storage Environment | Humidity | 70% | MBB not open: 24 months storage |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!