| Tolerance | ±5% |
| Voltage Rating | 100V |
| Capacitance | 220nF |
| Operating Temperature | -40℃~+85℃ |
| Dielectric Material | Polyester |
| Description | 220nF ±5% 100V Film Capacitor Polyester Through Hole P=10mm |
| Mfr. Part # | MEF224J100D02 |
| Package | Through Hole,P=10mm |
| Model Number | MEF224J100D02 |
View Detail Information
Explore similar products
Capacitor Jimson MRC224K300A06 offering non inductive high pulse resistor for
Durable JOEY MEF104K2G6AS6036A1 electronic part designed for seamless integratio
Metallized Polyester Film Capacitor for Coupling and Filtering WALSON C212A10356
capacitor Jimson MKP224K275A08 designed for transient endurance and long term
Product Specification
| Tolerance | ±5% | Voltage Rating | 100V |
| Capacitance | 220nF | Operating Temperature | -40℃~+85℃ |
| Dielectric Material | Polyester | Description | 220nF ±5% 100V Film Capacitor Polyester Through Hole P=10mm |
| Mfr. Part # | MEF224J100D02 | Package | Through Hole,P=10mm |
| Model Number | MEF224J100D02 |
The JIMSON (JS) MEF series capacitor is a metallized polyester film capacitor designed for low-frequency applications. It offers high reliability, superior performance, non-inductive construction, and self-healing capabilities. Ideal for filtering, noise suppression, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in communication equipment.
| Specification | Description | Value | Test Conditions | |||||
| Capacitance | Rated Capacitance | 0.22uF | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. | |||||
| Capacitance Tolerance | J=5% | |||||||
| Unit:VDC (5 S at 20) | 1.6*UR | |||||||
| Voltage Proof | No permanent breakdown and arcing | |||||||
| Dissipation Factor (tangent of loss) | DF0.8% | (C1.0uF) | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. | |||||
| DF1.0% | C>1.0uF | |||||||
| Insulation Resistance | IR15000M | C0.33uF | Measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% | |||||
| IR*C3000S | C0.33uF | |||||||
| Endurance | C/C8% | 1000 hours with 125% of rated voltage at 85. | ||||||
| DF0.30% | (C1uF) | |||||||
| DF0.5% | (C1uF) | |||||||
| IR 50% of the specified value | ||||||||
| Climatic Catalogue | 40/85/21 | |||||||
| Solder Ability | Solder should cover at least 75% of the circumference of the lead | Solder bath: 2355; Bath time: 2.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body | ||||||
| 75% | ||||||||
| Solder bath : 2355 | bath time: 2.00.5 sec | speed: 256 mm/sec | ||||||
| Heat Shock | C/C5% DF1.2* | Solder bath : 2605; Bath time: 5.00.5 sec; Speed: 256 mm/sec; Depth: 1.5+0.5/-0mm from the bottom of the body | ||||||
| Lead Tensile Strength | Pull2.2 LBS | Time: 5 sec | ||||||
| Lead Bending Strength | Load of lead1.1 LBS | The body of capacitor is bent 90 degrees and returned to its original position | ||||||
| Vibration | Frequency cycle: from 10Hz to 55Hz and then 10Hz; Amplitude: 1.5mm in three directions; Time: 2 hours each directions with a total of 6 hours | |||||||
| Reference Standard | IEC60384-2; GB/T 7332 | |||||||
| Construction | Dielectric | Polyester film | ||||||
| Electrodes | Vacuum evaporated metal | |||||||
| Coating | Epoxy resin, fire retardant on request | |||||||
| Leads | Radial leads of tinned wire | |||||||
| Terminal contact | Electrically welded | |||||||
| Features | High reliable and superior performance in low frequency application | |||||||
| Non-inductive construction | ||||||||
| Self-healing | ||||||||
| Application | Filter and noise suppression circuit | |||||||
| Pulse, logic and timing circuit | ||||||||
| DC-blocking, by-passing and signal coupling in general communication equipment | ||||||||
| Marking | Rated capacitance | e.g. 224 | ||||||
| Rated voltage | e.g. 100VDC | |||||||
| Capacitance tolerance | e.g. J | |||||||
| Manufacturer's symbol | JIMSON (JS) | |||||||
| Dimensions | Symbol | CAP | W Max | H Max | T Max | P 1.0 | D 0.05 | L +5/-10 |
| 224J100VDC | 0.22uF | Brown | 12.0 | 12.0 | 8.0 | 10.0 | 0.6 | 25.0 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification:
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!