Beijing Silk Road Enterprise Management Services Co., Ltd.
| Description | Through Hole,P=10mm Thin Film Capacitors RoHS |
| Mfr. Part # | MPE474J2SC05HC030ZR |
| Package | Through Hole,P=10mm |
| Model Number | MPE474J2SC05HC030ZR |
View Detail Information
Explore similar products
Capacitor Jimson MRC224K300A06 offering non inductive high pulse resistor for
Durable JOEY MEF104K2G6AS6036A1 electronic part designed for seamless integratio
Metallized Polyester Film Capacitor for Coupling and Filtering WALSON C212A10356
capacitor Jimson MKP224K275A08 designed for transient endurance and long term
Product Specification
| Description | Through Hole,P=10mm Thin Film Capacitors RoHS | Mfr. Part # | MPE474J2SC05HC030ZR |
| Package | Through Hole,P=10mm | Model Number | MPE474J2SC05HC030ZR |
The CL21(H)/MPE series are metallized polyester film capacitors (impregnated type) designed for DC filtering applications in electronic equipment, such as PFC and DC link circuits. These capacitors feature a non-inductive winding structure, small size, good self-healing properties, and are encapsulated with flame-retardant epoxy resin powder. They are widely used in LED drivers, switching power supplies, electronic ballasts, and inverters.
| Model | Capacitance (uF) | Tolerance (%) | Rated Voltage (VDC) | Dissipation Factor (DF) (1KHz) (%) | Dimensions (mm) W*H*T (1.0) | Lead Pitch (P) (1.0) | Lead Diameter (d) (0.0) | Product Code | Customer Part No. | Approval No. | Issue Date |
| CL21(H)/MPE 474J/450V/P=10/L=3 5% | 0.47 | 5% | 450 | 1.0 | 11.5*13.5*5.0 | 10.0 | 0.6 | MPE474J2SC05HC030ZR | CX-MPE-241119-03 | 2024-11-19 |
| Item | Technical Specification | Standard |
| Climate Category | 55/125/21 | |
| Operating Temperature Range | -55~+125 (+85~+125: Rated voltage derating 1.25%/) | |
| Rated Temperature | 85 | |
| Capacitance Range | 0.01F10F | |
| Capacitance Tolerance | 5%(J), 10%(K), 20%(M) | |
| Rated Voltage | 250V, 400/450Vdc, 500/520Vdc, 630Vdc | |
| Dissipation Factor (DF) | 0.01 (1kHz, 20) | |
| Insulation Resistance | 10,000M for C0.33uF (100VDC, 60 sec) 5000M*uF for C>0.33uF (100VDC, 60 sec) | |
| Withstand Voltage | 1.6UR(VDC), 5 sec | |
| Max. Pulse Rate of Voltage Rise (dV/dt) | See table for specific UR and P values |
| No. | Main Material | Description | Remarks |
| 1 | Metallized Polyester Film | MPEZAH | -/- |
| 2 | Sprayed Tin Layer | Zinc-tin alloy wire | -/- |
| 3 | Leads | Tin-plated Copper Clad Steel Wire | -/- |
| 4 | Outer Encapsulation Material | Epoxy Resin Powder | Flame-retardant UL94V-0 |
| 5 | Inner Protective Material | Epoxy Resin | |
| Note: All raw materials and finished products comply with RoHS environmental requirements. |
| Item | Details |
| Inner Carton Dimensions (L*W*H) | 34.5*23.5*24.5 cm |
| Outer Carton Dimensions (L*W*H) | 49*36*27 cm |
| Carton Contents | Manufacturer Part No., Number of packs and quantity per pack, Lot No. |
| Packaging Method | Capacitors packed in transparent PVC bags for moisture and dust protection. |
| Markings | RoHS environmental mark, other customer-specific markings. |
| Item | Specification |
| Temperature | 35 Max |
| Relative Humidity | 80% Max |
| Storage Time | Max 12 months (based on production date marked on packaging bag) |
| Requirement | Compliance |
| RoHS | Compliant |
| REACH | Compliant |
| Halogen-free | Compliant (if required) |
| No. | Item | Test Method | Initial Measurement | After Test |
| 1 | Terminal Strength | Tensile Strength: 10N, 10 sec Bending Strength: 5N, 902 times | No visible mechanical damage | |
| 2 | Solderability | Tinning rate of leads: 95% Solder temp: 2455, Immersion time: 2.50.5 sec | ||
| 3 | Soldering Heat Resistance | Appearance: No visible damage Solder temp: 2605, Immersion time: 101 sec, Recovery time: 1-2 hours | DF increase 0.005 (C1.0F, 10kHz) / 0.003 (C>1.0F, 1kHz) Capacitance change C/C2% | |
| 4 | Temperature Cycling | Appearance: No visible damage Cycle: -40 (30min) +105 (30min), 5 cycles | DF increase 0.005 (C1.0F, 10kHz) / 0.003 (C>1.0F, 1kHz) Capacitance change C/C2% | DF increase 0.005 (C1.0F, 10kHz) / 0.003 (C>1.0F, 1kHz) Capacitance change C/C5% Insulation Resistance IR/IR50% |
| 5 | Vibration | Appearance: No visible damage Amplitude 0.75mm or Accel. 98m/s, Freq. 10-500Hz, 3 directions, 2h each | ||
| 6 | Shock | Appearance: No visible damage 4000 cycles, Accel. 390m/s, Pulse duration: 6ms | ||
| 7 | Dry Heat | Appearance: No visible damage 105, 16 hours | DF increase 0.005 (C1.0F, 10kHz) / 0.003 (C>1.0F, 1kHz) Capacitance change C/C2% | DF increase 0.005 (C1.0F, 10kHz) / 0.003 (C>1.0F, 1kHz) Capacitance change C/C5% Insulation Resistance IR/IR50% |
| 8 | Damp Heat Cyclic | Test Db, 1st cycle | ||
| 9 | Cold | -40, 2 hours | ||
| 10 | Low Pressure | No permanent breakdown, arcing or harmful deformation of the casing; 8.5kPa, 1 hour | ||
| 11 | Damp Heat Cyclic | Test Db, remaining cycles | ||
| 12 | Steady State Damp Heat | Appearance: No visible damage 90-95%RH, 402, 21 days | DF increase 0.005 Capacitance change C/C5% | DF increase 0.005 Capacitance change C/C5% Insulation Resistance IR/IR50% |
| 13 | Endurance | Appearance: No visible damage 85, 1000 hours, Applied voltage: 1.25UR | DF increase 0.003 (C1.0F, 10kHz) / 0.002 (C>1.0F, 1kHz) Capacitance change C/C8% | DF increase 0.003 (C1.0F, 10kHz) / 0.002 (C>1.0F, 1kHz) Capacitance change C/C8% Insulation Resistance IR/IR50% |
| 14 | Characteristics Dependent on Temperature | Capacitance measurement at points b, d, f. | At lower category temp -40: 0(Cb-Cd)/Cd+3% At upper category temp 105: -4.0%(Cf-Cd)/Cd0 | |
| 15 | Charge/Discharge | Appearance: No visible damage 10,000 cycles, Charge time: 0.5 sec, Discharge time: 0.5 sec, Charge voltage: UR, Charge resistance: 220/CR (), Discharge resistance: 10/CR or 20 (whichever is larger) | DF increase 0.003 (10KHz,CR1.0uF) / 0.002 (1KHz,CR>1.0uF) Capacitance change C/C5% | DF increase 0.003 (10KHz,CR1.0uF) / 0.002 (1KHz,CR>1.0uF) Capacitance change C/C5% Insulation Resistance IR/IR50% |
Usage Scope: Do not exceed the upper category temperature, avoid overload, and do not exceed the maximum pulse current.
Operation Notes: Avoid repeated squeezing at the lead root, be careful of lead tips.
Soldering: Solder heat can transfer to the capacitor core. Ensure solder temperature is within the following ranges:
- Wave Soldering: TP 125 for 120 sec; Ts 160 for 45 sec.
- Soldering Iron: Tip temperature not exceeding 350 for no more than 3 seconds.
- Not suitable for reflow soldering.
Note: Curves are typical values under sinusoidal voltage, ambient temperature 85, and internal temperature rise T=10. CL21(H) series is for DC filtering and DC module circuits only, with unidirectional ripple voltage. Not for AC circuits. Consult technical staff for any doubts.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!