Beijing Silk Road Enterprise Management Services Co., Ltd.
| Tolerance | ±5% |
| Voltage Rating | 100V |
| Capacitance | 1uF |
| Operating Temperature | -40℃~+110℃ |
| Dielectric Material | Metallized Polyester |
| Description | 1uF ±5% 100V Film Capacitor Metallized Polyester Through Hole P=5mm |
| Mfr. Part # | PE105J2A0502 |
| Package | Through Hole,P=5mm |
| Model Number | PE105J2A0502 |
View Detail Information
Explore similar products
Capacitor Jimson MRC224K300A06 offering non inductive high pulse resistor for
Durable JOEY MEF104K2G6AS6036A1 electronic part designed for seamless integratio
Metallized Polyester Film Capacitor for Coupling and Filtering WALSON C212A10356
capacitor Jimson MKP224K275A08 designed for transient endurance and long term
Product Specification
| Tolerance | ±5% | Voltage Rating | 100V |
| Capacitance | 1uF | Operating Temperature | -40℃~+110℃ |
| Dielectric Material | Metallized Polyester | Description | 1uF ±5% 100V Film Capacitor Metallized Polyester Through Hole P=5mm |
| Mfr. Part # | PE105J2A0502 | Package | Through Hole,P=5mm |
| Model Number | PE105J2A0502 |
This document specifies the requirements for MEF: Metallized Polyester Film Capacitors (CL21 powder-packed type) manufactured by Dongguan City Keya Electronics Technology Co., Ltd. These capacitors are designed for general-purpose applications and are suitable for use within their specified electrical and environmental ratings. The document details product dimensions, coding, usage guidelines, and comprehensive technical specifications.
| ITEM | DESCRIPTION | SPECIFICATION |
| SCOPE | This specification applies to Keya's requirements | MEF: Metallized Polyester Film Capacitors (CL21 powder-packed type) |
| STANDARD ATMOSPHERIC CONDITIONS FOR MEASUREMENTS | Ambient Temperature | 15 to 35 (if doubt, +20 5) |
| Relative Humidity | 45% to 75% (if doubt, 60% to 70%) | |
| Air Pressure | 86 kPa to 106 kPa | |
| OPERATING TEMPERATURE RANGE | Continuous operation at rated voltage | -40 to +110 |
| CONSTRUCTION | Dielectric | Metallized Polyester Film |
| Metal Spray | Special Solder | |
| Lead Wire | Tinned Copper-clad Steel Wire | |
| Epoxy Resin | UL V-0 Flame Retardant | |
| Plastic Case | UL V-0 Flame Retardant | |
| MARKING | Manufacturer's Symbol | "KYET ELECTRONICS CO., LTD" |
| Type or Material | "PE" stands for "Metallized Polypropylene Film" | |
| Capacitor Class | "CL21" stands for "MEF" class | |
| Nominal Capacitance | Expressed in 3-digit (EIA) code | |
| Tolerance | J (5%), K (10%), M (20%) | |
| Rated Voltage | 100, 250, 400, 450, 630 VDC | |
| Operating Temperature Range | -40110 | |
| Dissipation Factor (Max) | 1% (at 1KHz, 25) | |
| Insulation Resistance (IR) | CR0.33F: IR10000M; CR0.33F: IR5000M/F (UR100V) | |
| ELECTRICAL CHARACTERISTICS | Withstand Voltage (Between Terminals) | 1.5*Ur (DC) for 60 sec. (no abnormality) |
| Withstand Voltage (Between Terminals & Enclosure) | 2*Ur+500V for 2 to 5 sec. Min. 600VDC (no abnormality) | |
| Dissipation Factor (DF) | 1.0(1%) at 1 KHz | |
| Capacitance (CAP) | Within the tolerance specified (at +20 5) | |
| Insulation Resistance (I.R.) | 10,000 Mohm (C0.33uf); 5,000 Mohm*uF/C (C>0.33uf) (Vt=100 VDC, Charge Time: 605 sec.) | |
| MECHANICAL CHARACTERISTICS | Terminal Strength (Tensile Strength) | Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction (no abnormality) |
| ENDURANCE CHARACTERISTICS | Temperature Cycle | 5 cycles (conditions specified in document) |
| Capacitance Change Rate (C/C) after Temp. Cycle | Within 5% | |
| Dissipation Factor after Temp. Cycle | 1.0 (1%) max. @ 1KHz | |
| Insulation Resistance after Temp. Cycle | 50% of the limit value | |
| Dry Heat Resistance | +100 2 for 16 1 hrs. | |
| Capacitance Change Rate after Dry Heat | Within 5% | |
| Dissipation Factor after Dry Heat | 1.0 (1%) max. @ 1KHz | |
| Insulation Resistance after Dry Heat | 50% of the limit value | |
| Cold Resistance | -40 3 for 2 1 hrs. | |
| Capacitance Change Rate after Cold | Within 5% | |
| Dissipation Factor after Cold | 1.0 (1%) max. @ 1KHz | |
| Insulation Resistance after Cold | 50% of the limit value | |
| Damp Heat | +40 2, 90% to 95% R.H. for 2 1 hrs. | |
| Capacitance Change Rate after Damp Heat | Within 5% | |
| Dissipation Factor after Damp Heat | 1.0 (1%) max. @ 1KHz | |
| Insulation Resistance after Damp Heat | 50% of the limit value |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!