Beijing Silk Road Enterprise Management Services Co., Ltd.
| Tolerance | ±5% |
| Voltage Rating | 400V |
| Capacitance | 50nF |
| Operating Temperature | -40℃~+105℃ |
| Dielectric Material | Metallized Polyester |
| Description | ±5% 400V 50nF -40℃~+105℃ Metallized Polyester Through Hole,P=5mm Thin Film Capacitors RoHS |
| Mfr. Part # | C212G50342P20001 |
| Package | Through Hole,P=5mm |
| Model Number | C212G50342P20001 |
View Detail Information
Explore similar products
Capacitor Jimson MRC224K300A06 offering non inductive high pulse resistor for
Durable JOEY MEF104K2G6AS6036A1 electronic part designed for seamless integratio
Metallized Polyester Film Capacitor for Coupling and Filtering WALSON C212A10356
capacitor Jimson MKP224K275A08 designed for transient endurance and long term
Product Specification
| Tolerance | ±5% | Voltage Rating | 400V |
| Capacitance | 50nF | Operating Temperature | -40℃~+105℃ |
| Dielectric Material | Metallized Polyester | Description | ±5% 400V 50nF -40℃~+105℃ Metallized Polyester Through Hole,P=5mm Thin Film Capacitors RoHS |
| Mfr. Part # | C212G50342P20001 | Package | Through Hole,P=5mm |
| Model Number | C212G50342P20001 |
Metallized polyester film capacitors designed for DC and VHF signal applications, including blocking, by-pass, and coupling. They are widely used in filter and low pulse circuits. These capacitors feature a non-inductive wound construction with a wide capacitance range, small size, and light weight. They offer good self-healing properties and a long lifespan, with flame-retardant epoxy resin powder coating (UL94/V-0).
| Spec. & Walsons P/N | Capacitance | Tolerance | Rated Voltage (VDC) | Operating Temperature Range | Rated Temperature | Capacitance Range | Capacitance Tolerance | Voltage Proof | Dissipation Factor (1kHz, 1V) | Insulation Resistance (100V, 1min) |
|---|---|---|---|---|---|---|---|---|---|---|
| CL21X-400V-503-P5 C212G50342P20001 | 50nF | 5% | 400 | -40 +105 | 85 | 0.0010 F10.0 F | 5 % (J)10 % (K) | 1.6 UR (20 , 5 s) | 0.0090 (CR1.0 F) 0.0100 (CR1.0 F) | 7500 M (CR0.33 F) 2500 s (CR0.33 F) |
| No. | Test Item | Test Method | Requirement |
|---|---|---|---|
| 1 | External Check | Visual inspection and caliper measurement | Appearance is regular without visible damage; Mark is regular, clear and correct. |
| 1 | Terminal Strength | Pull: 5 N, Direction: 180 , Time: 101 s | No visible damage |
| 1 | Bending | Pull: 2.5 N, Direction: 90 , Times: 2 | No visible damage |
| 1 | Soldering Heat Resistance | Solder temp: 260 C5 C, Immersion time: 10 s1 s | No visible damage |
| 2 | Solderability | Solder temp: 235 C 5 C, Immersion time: 2.0 s0.5 s | Lead wire surface well tinned, welding layer area 95 % |
| 2 | Rapid Change of Temperature | A=-40 C, B=+125 C, 5 cycles, Duration: 30 min | No visible damage |
| 2 | Vibration | Frequency: 10-500 Hz, Amplitude: 0.75 mm, Duration: 2 h per direction (X, Y, Z) | No visible damage |
| 2 | Bump | Times: 4000, Acceleration: 390 m/s, Pulse duration: 6 ms | No visible damage |
| 3 | Climate Sequence | Dry Heat (+125C, 16h), Damp Heat Cyclic (Db, Severity b), Cold (-40C, 2h) | Appearance no visible damage, marking clear. Capacitance change: |C/C| 5 %, Tan increase: Tan 0.008 (1 kHz), I.R. 50 % of rated value. |
| 4 | Damp Heat Steady State | Temp: +40C2 C, Humidity: 93%2 %RH, Duration: 21 Days | No visible damage. Capacitance change: |C/C| 5 %, Tan change: Tan 0.005 (1 kHz), I.R. 50 % of initial measurement. |
| 5 | Endurance | Temp: +85C2 C, Duration: 1000 hours, Test voltage: 1.25 UR | No visible damage, marking clear. Capacitance change: |C/C| 8 %, Tan change: Tan 0.005 (1 kHz), I.R. 50 % of initial measurement. |
| 6 | Temperature Characteristic | Static method at -40C, +20C, +105C | At -40C: -3.6 % C/C 0. At +105C: 0 C/C +6.3 %. |
| 7 | Charging and Discharging | Times: 10000, Charging voltage: 1.0 UR, Charging time: 0.5 s, Discharging time: 0.5 s | Capacitance change: |C/C| 5 %, Tan change: Tan 0.005 (1 kHz), I.R. 50 % of initial measurement. |
Temperature Characteristic Curve (Capacitance vs. Temperature, Dissipation Factor vs. Temperature, I.R. vs. Temperature)
Frequency Characteristic Curve (Capacitance vs. Frequency, Dissipation Factor vs. Frequency)
Welding heat can affect capacitor leads and encapsulation. High temperature and prolonged welding can impact performance and lead to failure. Refer to welding chart for conditions.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!