Beijing Silk Road Enterprise Management Services Co., Ltd.
| Tolerance | ±5% |
| Capacitance | 10nF |
| Dielectric Material | Polypropylene Film |
| Description | ±5% 10nF Polypropylene Film Through Hole,P=15mm Thin Film Capacitors RoHS |
| Mfr. Part # | MPC103J2000D02 |
| Package | Through Hole,P=15mm |
| Model Number | MPC103J2000D02 |
View Detail Information
Explore similar products
Capacitor Jimson MRC224K300A06 offering non inductive high pulse resistor for
Durable JOEY MEF104K2G6AS6036A1 electronic part designed for seamless integratio
Metallized Polyester Film Capacitor for Coupling and Filtering WALSON C212A10356
capacitor Jimson MKP224K275A08 designed for transient endurance and long term
Product Specification
| Tolerance | ±5% | Capacitance | 10nF |
| Dielectric Material | Polypropylene Film | Description | ±5% 10nF Polypropylene Film Through Hole,P=15mm Thin Film Capacitors RoHS |
| Mfr. Part # | MPC103J2000D02 | Package | Through Hole,P=15mm |
| Model Number | MPC103J2000D02 |
The JIMSON MPC series capacitors, manufactured by () (JIMSON ELECTRONICS (XIAMEN) CO.,LTD.), are designed for a wide range of electronic applications. These non-inductive, self-healing capacitors feature high moisture resistance and excellent environmental adaptability. They are suitable for filtering, noise suppression, pulse, logic, and timing circuits, as well as DC-blocking, by-passing, and signal coupling in communication equipment. Additionally, they provide protection against peak voltage and current in power electronic devices.
| Description | Value | Test Conditions |
| Capacitance | ||
| Rated Capacitance | 0.01-60uF | Measuring frequency: 1kHz10%; Measuring voltage: 1Vrms.max. |
| Capacitance Tolerance | J=5% / K=10% | |
| Voltage | ||
| Rated Voltage | 250-2000VDC | |
| Voltage Proof | 1.6*U (1 minute at 20) | No permanent breakdown or flashover |
| Dissipation Factor (tangent of loss) | ||
| DF | 0.1% (for C10uF) | at 20, 1KHz, 1Vrms.max. |
| DF | 0.2% (for C<10uF) | at 20, 1KHz, 1Vrms.max. |
| Insulation Resistance | ||
| IR | 30000M (for C0.33uF) | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| IR*C | 5000S (for C0.33uF) | measured at rated voltage or less than 100VDC, 1 minute at 20 and RH65% |
| Endurance | ||
| Conditions | 1000 hours with 125% of rated voltage at 85 | C/C5%; DF0.40%; IR50% of the specified value |
| Climatic Catalogue | ||
| Category | 40/85/21 | |
| Solderability | ||
| Conditions | Solder bath: 2355, bath time: 2.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body | Solder should cover at least 75% of the circumference of the lead |
| Heat Shock (Soldering Heat Resistance) | ||
| Conditions | Solder bath: 2605, bath time: 5.00.5 sec, speed: 256 mm/sec, depth: 1.5+0.5/-0mm from the bottom of the body | C/C5%, DF1.2*specified value. No visible damage after test. |
| Lead Tensile Strength | ||
| Load | 2.2 LBS | Time: 5 sec. No visible damage. |
| Lead Bending Strength | ||
| Load | 1.1 LBS | The body of capacitor is bent 90 degrees and returned to its original position. No visible damage. |
| Vibration | ||
| Conditions | Frequency cycle: 10Hz to 55Hz and then 10Hz, Amplitude: 1.5mm in three directions, Time: 2 hours each direction (total 6 hours) | No visible damage. |
| SYMBOL | CAP (uF) | COLOR | W*H*T (mm 0.5) | L (mm 5) | P (mm 1.0) | D (mm 0.05) | REMARKS |
| MPC103J2000D02 | 0.01 | YELLOW | 18*12*6 | 25 | 15 | CP0.6 | L25 |
| MPC104J630D04 | 0.1 | YELLOW | 18*18*10 | 25 | 15 | CP0.8 | Double film |
| MPC104K520D01 | 0.1 | YELLOW | 13*12*6 | 25 | 10 | CP0.6 | |
| MPC105J1000D01 | 1.0 | YELLOW | 32*20*11 | 3.8 | 27.5 | CP0.8 | |
| MPC105K1000D02 | 1.0 | YELLOW | 41.5*31.4*24 | 25 | 37.5 | CP1.0 | |
| MPC105K450D01 | 1.0 | YELLOW | 18*18*10 | 23 | 15 | CP0.8 | |
| MPC106J650D01 | 10.0 | YELLOW | 41.5*24*19 | 21 | 37.5 | CP0.8 | Four pin, B=12.7 |
| MPC155K100D01 | 1.5 | YELLOW | 15*17*7 | 20 | 12.5 | CU0.8 | |
| MPC155K450D01 | 1.5 | YELLOW | E8 | 25 | 22.5 | CP0.8 | |
| MPC156K1200D01 | 15.0 | YELLOW | 42.5*38*25 | 21 | 37.5 | CU0.8 | Four pin, B=20.3 |
| MPC156K900D01 | 15.0 | BLACK | 42*36*23 | 25 | 37.5 | CU0.8 | Black case yellow glue |
| MPC224J630A01 | 0.22 | YELLOW | 18*16*10 | 25 | 15 | CP0.6 | |
| MPC226K1200D01 | 22.0 | YELLOW | 58*40*28 | 21 | 52.5 | CU1.0 | Boxed |
| MPC332J1000D02 | 0.0033 | YELLOW | 13*9*4 | 25 | 10 | CP0.6 | |
| MPC332J2000D01 | 0.0033 | YELLOW | 18*12*6 | 25 | CP0.6 | L25 | Gray yellow glue |
| MPC333K1000A01 | 0.033 | YELLOW | 18*12*6 | 25 | 15 | CP0.8 | Double film |
| MPC335K250D01 | 3.3 | YELLOW | 31*25*14 | 25 | 27.5 | CP0.8 | |
| MPC335K450D01 | 3.3 | YELLOW | 32*20*11 | 25 | 27.5 | CP0.8 | |
| MPC473J630D05 | 0.047 | YELLOW | 18*12*6 | 3.8 | 15 | CP0.6 | |
| MPC504J1000D01 | 0.05 | BLACK | 38*30*20 | 21 | 30.5 | CP0.8 | Black case yellow glue |
| MPC504J1000D02 | 0.05 | YELLOW | 32*33*18 | 3.5 | 27.5 | CU1.0 | Irregular box |
| MPC565M250D01 | 5.6 | YELLOW | 31*25*14 | 30 | 27.5 | CP0.8 | |
| MPC605K1200D01 | 6.0 | YELLOW | 41.5*31.4*24 | 25 | 37.5 | CP1.0 | |
| MPC606K500D01 | 60.0 | YELLOW | 42.5*50*35 | 21 | 37.5 | CP0.8 | Four pin, B=20.3 |
| MPC805K1000D01 | 8.0 | YELLOW | 32*37*22 | 23 | 27.5 | CP0.8 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!