Product Specification

Product Specification Approval Sheet - Metallized Polyester Film Capacitors (Miniaturized)

This document outlines the specifications for Metallized Polyester Film Capacitors (Miniaturized) manufactured by Dongguan Weidy Industrial Co., Ltd. It serves as an approval sheet for product W222A153JD5L00A00A, also known as WDQV-153J-P5.

Product Attributes

• Brand: Weidy
• Origin: Dongguan, China
• Material: Metallized Polyester Film
• Certifications: GB/T 2693 (IEC 60384-1), GB/T 7332 (IEC 60384-2), UL94V-0 (for outer epoxy resin)

Technical Specifications

Product Characteristics

Product Name: Metallized Polyester Film Capacitors (Miniaturized)

Reference Standards: GB/T 2693 (IEC 60384-1), GB/T 7332 (IEC 60384-2)

Product Structure: Metallized polyester film, spray gold layer, leads, inner epoxy resin encapsulation, outer flame-retardant epoxy resin encapsulation (UL94V-0).

Atmospheric Conditions: IEC 68-1 Standard atmospheric conditions (Temperature: 1535, Humidity: 25%75%, Pressure: 86KPa106KPa).

Technical Parameters:

• Climatic Category: 55/105/21
• Rated Temperature: 85
• Operating Temperature Range: -55105 (+85 to 105: decreasing factor 1.25% per for VR(dc))
• Rated Voltage: 63V, 100V, 250V, 400V
• Capacitance Range: 0.001F~1.0F
• Capacitance Tolerance: 5% (J); 10% (K)
• Withstand Voltage: 1.4UR (5s)
• Rate of Voltage Application: 100V/s, cut-off current: 5mA
• Dissipation Factor (tan ): 1.0% (20, 1KHz)
• Insulation Resistance: UR100V 15000M; CR0.33F 5000S; CR0.33F (20, 10V, 1min); UR100V 15000M; CR0.33F 5000S; CR0.33F (20, 100V, 1min)

Reliability Tests

Lead Strength (IEC 68-2-21):

• Tensile Force: 0.3d0.5: 5N; 0.5d0.8: 10N; 0.8d1.25: 20N
• Bending: 0.3d0.5: 2.5N; 0.5d0.8: 5N; 0.8d1.25: 10N (continuous twice in both directions)

Solderability (IEC 68-2-20): Solder bath temperature: 2355, immersion time: 2.0s0.5s. Leads should be well tinned.

Resistance to Soldering Heat (IEC 68-2-20): Solder bath temperature: 2605, immersion time: 10s1s. Immersion depth 2+0/-0.5mm from mounting surface, using 1.5mm0.5mm insulating shield plate. Capacitance change: C/C : 2%; Dissipation change: tan : 0.3% at 1 KHZ.

Rapid Change of Temperature (IEC 68-2-14): Temperature: A = -55; B = +105. Duration: 30min; Cycles: 5. Capacitance change: C/C : 5%; Dissipation change: tan : 0.3% at 1 KHZ; Insulation resistance: 50% of initial measurement.

Vibration (IEC 68-2-6): Frequency: 10500Hz. Duration: 2 hours in each of three directions, total 6 hours. Amplitude 0.75mm or acceleration 98m/s2. No visible damage or loosening.

Impact (IEC 68-2-29): Number of impacts: 4000. Acceleration: 390m/s2. Pulse duration: 6ms. No visible damage or loosening.

Climatic Sequence:

• Dry Heat (IEC 68-2-2): Temperature: +105, Duration: 16 hours. No permanent breakdown or arcing. No visible damage. Clear marking. Capacitance change: C/C : 5%; Dissipation change: tan : 0.3% at 1 KHZ; Insulation resistance: 50% of initial measurement.
• Cold (IEC 68-2-1): Temperature: -55, Duration: 2 hours.
• Low Air Pressure (IEC 68-2-13): Temperature: 1535, Pressure: 8.5KPa, Duration: 1 hour (Rated voltage applied during the last 1 minute of the test cycle).
• Cyclic Damp Heat (IEC 68-2-30, Test Db, severity b): After other cycles are completed. Rated voltage applied for 1 minute after the test.
• Steady State Damp Heat (IEC 68-2-3): Temperature: 402, Humidity: 93 +2/-3 %, Duration: 21 days. No visible damage, clear marking. Capacitance change: C/C : 5%; Dissipation change: tan : 0.5% at 1 KHZ; Insulation resistance: 50% of initial measurement.

Marking Description

The marking on the product includes Nominal Capacitance (e.g., 153J), Rated Voltage (e.g., 100V), and Capacitance Tolerance.

Packaging Information

Bulk Packaging (Inner Box): L: 280mm, W: 225mm, H: 120mm

Bulk Packaging (Outer Box): L: 480mm, W: 320mm, H: 280mm

Taped Packaging (Inner Box): A: 50mm, B: 320mm, C: 330mm

Taped Packaging (Outer Box): L: 640mm, W: 360mm, H: 290mm