Beijing Silk Road Enterprise Management Services Co., Ltd.
| Impedance | 50Ω |
| Insertion Loss | 1dB |
| Description | 1dB SMD-5P,1.1x0.9mm RF Filters RoHS |
| Mfr. Part # | BTLB001109KXVHBA10 |
| Package | SMD-5P,1.1x0.9mm |
| Model Number | BTLB001109KXVHBA10 |
View Detail Information
Explore similar products
N Female Connector 5.8GHz 4 Pole Outdoor Bandpass Filter L com BPF5800A Designed
Indoor Bandpass Filter 8 Pole 2.4GHz L-com BPF24-801 Suitable for Channel 1
Outdoor 8 Pole Bandpass Filter Model L-com BPF24-811A Featuring N Female
8 Pole Outdoor Bandpass Filter Featuring N Female Connectors L com BPF24 806A
Product Specification
| Impedance | 50Ω | Insertion Loss | 1dB |
| Description | 1dB SMD-5P,1.1x0.9mm RF Filters RoHS | Mfr. Part # | BTLB001109KXVHBA10 |
| Package | SMD-5P,1.1x0.9mm | Model Number | BTLB001109KXVHBA10 |
The BTLB001109KXVHBA10 is a miniaturized SMD component designed for high-frequency and space-limited applications. It features a compact, low-profile, and lightweight design, making it ideal for modern electronic devices. This component offers low insertion loss and high attenuation, effectively eliminating noise across a wide frequency range. Its high soldering heat resistance ensures compatibility with both flow and re-flow soldering methods. The product is available in tape and reel packaging for efficient automatic mounting.
| Part No. | Pass Band | Insertion Loss (at 25) | Insertion Loss (at 105) | Return Loss | Attenuation (50~960 MHz) | Attenuation (1560~1606 MHz) | Attenuation (1710~1990 MHz) | Attenuation (3600 MHz) | Attenuation (4800~5000 MHz) | Attenuation (7200~7500 MHz) | Operating Temperature Range | Power Capacity |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BTLB001109KXVHBA10 | 2400~2500 MHz | 1 dB max. | 1.2 dB max. | 15 dB min. | 20 dB min. | 30 dB min. | 15 dB min. | 10 dB min. | 35 dB min. | 25 dB min. | -40~105C | 3W max. |
| Designation | L | W | T | a | b | c | d | e | f |
|---|---|---|---|---|---|---|---|---|---|
| Dimensions (mm) | 1.100.10 | 0.900.10 | 0.60 max. | 0.250.05 | 0.180.05 | 0.250.05 | 0.750.05 | 0.950.05 | 0.3850.05 |
| Test Item | Test Condition | Specification |
|---|---|---|
| Vibration | 10 Hz/min~55 Hz/min~10 Hz/min vibration frequency with 1.5 mm amplitude for two hours in x, y, z directions | No apparent damage |
| Drop shock | Dropped onto printed circuit board from 100cm height three times in x, y, z directions. The terminals shall be protected. | No apparent damage |
| Soldering heat resistance | Preheating: 15010 (1-2 min). Solder bath: 2605 (101 sec). | Loss of metallization on the edges of each electrode shall not exceed 25%. |
| Bending test onto printed circuit board | Apply load until bending reaches 2 mm (60 sec holding time). | No apparent damage |
| Solderability | Solder bath: 2455. Immersion time: 31 seconds. Solder: Sn3Ag0.5Cu. | At least 95% of a surface of each terminal electrode must be covered by fresh solder. |
| Adhesive strength | Standard for 1109~2016 size | >0.5KgF |
| Thermal shock | -40~105 for 100 cycles (30 min each cycle). | No apparent damage. Fulfill electrical spec. after test. |
| Humidity resistance | 1052, 80~90% R.H. for 1000 hours. | No apparent damage. Fulfill electrical spec. after test. |
| High temperature resistance | 1052 for 1000 hours. | No apparent damage. Fulfill electrical spec. after test. |
| Low temperature resistance | -403 for 1000 hours. | No apparent damage. Fulfill electrical spec. after test. |
| SERIES | PCS/Reel | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) |
|---|---|---|---|---|---|---|---|
| 1109 | 10000 | 1780.3 | 600.2 | 19.30.1 | 13.50.1 | 13.60.1 | - |
| Parameter | Sn-Pb | Pb-Free |
|---|---|---|
| Preheat Tsmin | 100 | 150 |
| Preheat Tsmax | 150 | 200 |
| Average ramp-up rate (Tsmax to TP) | 3/second max. | 3/second max. |
| Time main above Temperature (TL) | 183 (60~150 seconds) | 217 (60~150 seconds) |
| Peak temperature (TP) | 230 | 250~260 |
| Time within 5 of actual peak temperature (tP) | 10 seconds | 10 seconds |
| Ramp-down rate | 6/sec max. | 6/sec max. |
| Time 25 to peak temperature | 6 minutes max. | 8 minutes max. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!