Beijing Silk Road Enterprise Management Services Co.,LTD
| Voltage Rating | 50V |
| Capacitance | 100nF |
| Temperature Coefficient | M3L |
| Tolerance | ±5% |
| Description | 50V 100nF M3L ±5% 1206 Ceramic Capacitors RoHS |
| Replaces Part Number | AIDE CAPACITOR |
| Package | 1206 |
| Model Number | Switching power supply capacitor AIDE CAPACITOR 1206M3L104J500NT with multilayer ceramic construction |
View Detail Information
Explore similar products
Multi Layer Ceramic Capacitor AIDE CAPACITOR 0805X5R106K500NT for High Voltage
Multi Layer Ceramic Capacitor AIDE CAPACITOR 0603X7R225K250NT featuring Au Ag Ni
High voltage multi layer ceramic capacitor AIDE CAPACITOR 0603X5R226M100NT
MLCC capacitor AIDE CAPACITOR 1206X5R226K250NT for networking communication
Product Specification
| Voltage Rating | 50V | Capacitance | 100nF |
| Temperature Coefficient | M3L | Tolerance | ±5% |
| Description | 50V 100nF M3L ±5% 1206 Ceramic Capacitors RoHS | Replaces Part Number | AIDE CAPACITOR |
| Package | 1206 | Model Number | Switching power supply capacitor AIDE CAPACITOR 1206M3L104J500NT with multilayer ceramic construction |
High-voltage multilayer ceramic capacitors (MLCCs) designed for coupling, filtering, and resonant applications in high-voltage electronic circuits. These capacitors are suitable for use in switching power supplies, AC-DC and DC-DC converters, network/communication interfaces, LCD module backlight power supplies, and energy-saving lamp ballasts. They are manufactured with a ceramic dielectric, internal electrodes, external electrodes, and a nickel/tin termination layer.
| Item | Specification | Test Method |
|---|---|---|
| Product Size Codes | 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2211, 2225 | - |
| Nominal Capacitance (Example) | 473 = 47nF (three-digit method) | - |
| Capacitance Tolerance | B: 0.1pF, C: 0.25pF, D: 0.5pF, F: 1%, G: 2%, J: 5%, K: 10%, M: 20%, Z: +80%/-20% | - |
| Rated Voltage (DC) (Example) | 500 (50V), 101 (100V), 151 (150V) (three-digit method) | - |
| Operating Temperature Range | -55 to +85 | Visual Inspection |
| Appearance & Dimensions | No visible damage; Dimensions meet specifications | Visual Inspection; Caliper measurement |
| Static Capacitance | Within specified tolerance | 10uF: 1KHz10%, 1.00.2Vrms 10uF: 120Hz24, 0.50.1Vrms |
| Dissipation Factor (DF Value) | <0.1% | Cr10uF: 1KHz10%, 1V0.1rms Cr10uF: 120Hz24, 0.5V0.1rms |
| Insulation Resistance | >1 G | Test Voltage: 250V; Test Time: 605 sec; Test Humidity: 70%; Test Temperature: 255 |
| Withstand Voltage (DC) | No dielectric breakdown or damage | Test Voltage: Rated Voltage; Test Time: 2 sec |
| Solderability | Tinning rate 95%, pinholes or rough area <5%, no visible damage | Preheat: 80-120/10-30 sec; Lead-free solder: 2455; Immersion time: 21 sec |
| Solder Heat Resistance | Appearance: No visible damage, Tinning rate 95% | Preheat: 120~150/60 sec; Solder pot temp: 2705; Immersion time: 101 sec. Electrodes fully immersed. Clean with solvent. Condition at room temp for 242 hours. |
| Capacitance Change Rate (Solder Heat Resistance) | -2.5% < C/C 2.5% | - |
| DF Value (Solder Heat Resistance) | As per NO.4 | - |
| IR (Solder Heat Resistance) | As per NO.5 | - |
| Bending Strength | No visible damage | Test substrate: Al2O3 or PCB (1.6mm thick, 100mm length, 40mm width). Bending depth: 1mm. Pressing speed: 1mm/sec. Measurement under bent state. |
| Capacitance Change Rate (Bending Strength) | |C/C| 5% | - |
| Terminal Bond Strength | No visible damage | - |
| Temperature Cycling | |C/C| 2.5% | Pre-treatment: Upper temp 1 hr, condition 241 hr. 5 cycles: -55 (30 min), 25 (2-3 min), +85 (30 min), 25 (2-3 min). Condition at room temp/humidity for 242 hours before testing. |
| Damp Heat Test | Appearance: No visible damage | Temperature: 402; Humidity: 90~95%RH; Time: 50024 hours. Condition at room temp/humidity for 24 hours after test. |
| Capacitance Change Rate (Damp Heat) | |C/C| 5% | - |
| DF Value (Damp Heat) | 2 times initial standard | - |
| IR (Damp Heat) | >500M | - |
| High Temperature Load Test | Appearance: No visible damage | Condition at room temp/humidity for 242 hours after test. Temperature: 85; Time: 100048 hours; Voltage: 1.5x rated voltage (100V V 250V). |
| Capacitance Change Rate (High Temp Load) | |C/C| 5% | - |
| DF Value (High Temp Load) | 2 times initial standard | - |
| IR (High Temp Load) | >500M | - |
| Product Structure | Ceramic Dielectric, Internal Electrode, External Electrode, Nickel Layer, Tin Layer | - |
| Product Dimensions (Example: 1206) | L: 3.200.20mm, W: 1.600.20mm, T: 1.250.20mm, WB: 0.30-0.8mm | Inch Equivalent: 0.12*0.06 |
| Packaging Dimensions (Example: 1206 Tape) | A: 1.950.20, B: 3.600.20, C: 8.000.20, D: 3.500.05, E: 1.750.10, F: 4.000.10, G: 2.000.10, H: 4.000.1, J: 1.50 -0/+0.10, T: 1.85 Max | - |
| Pieces per Reel (Example: 1206) | T1.35mm: 3000 Pcs; T1.35mm: 2000 Pcs | - |
Standard Conditions:
Standard Relative Conditions (for verification):
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>300
Ecer Certification：
Verified Supplier
Beijing Silk Road Enterprise Management Services Co.,LTD is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. &nbs... Beijing Silk Road Enterprise Management Services Co.,LTD is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. &nbs...
Get in touch with us
Leave a Message, we will call you back quickly!