Wuxi Jungu Technology Co., Ltd.
| Elasticity | High |
| Tensile Strength | 100-500 kPa |
| Compression Strength | 50-300 kPa |
| Thermal Conductivity | 0.02-0.04 W/m·K |
| Chemical Resistance | Resistant to oils and solvents |
| Packaging Details | Different packaging methods are adopted according to different modes of transport. |
| Color | Varies (commonly white, yellow, or black) |
| Payment Terms | L/C, T/T, D/P, D/A |
| Brand Name | Guibao |
View Detail Information
Explore similar products
Dong Yuan Series One-component Polyurethane Foam Joint Sealant
Dongyuan single-component polyurethane foam sealant
Winterdongyuan single-component polyurethane foam sealant for joints
Single-component polyurethane foam sealant
Product Specification
| Elasticity | High | Tensile Strength | 100-500 kPa |
| Compression Strength | 50-300 kPa | Thermal Conductivity | 0.02-0.04 W/m·K |
| Chemical Resistance | Resistant to oils and solvents | Packaging Details | Different packaging methods are adopted according to different modes of transport. |
| Color | Varies (commonly white, yellow, or black) | Payment Terms | L/C, T/T, D/P, D/A |
| Brand Name | Guibao |
Product features
1.The normal applicable temperature of the material tank: +10°C to +35°C;
2.The optimal usage temperature: +18°C to +25°C;
3.The temperature range of the cured foam: -30°C to +80°C;
4.The drying time: approximately 8 to 10 minutes, and it can be cut, sanded and sprayed after 60 minutes of curing;
5.Safety: This product is harmless to the human body after curing;
6.Foaming ratio: This product was tested according to the JC/T 936 standard, and the foaming ratio is 60 times.
Main purpose
Filling and installation of door and window frames;
Sealing of wall cracks and holes;
Filling of gaps in pipes, ventilation openings and electrical outlets.
Specification
| Item | Specification |
|---|---|
| Product Name | Guibao High-performance Environmentally Friendly Polyurethane Foam Joint Sealant |
| Curing Type | Single-component moisture-cured |
| Initial Foam Expansion Rate | 30 times |
| Density of Cured Polyurethane Foam | 18kg/m³ |
| Tack-free Time | 10 minutes |
| Full Curing Time | 60 minutes |
| Recommended Operating Temperature | +5℃ ~ +35℃ |
| Net Content | 750ml per aerosol can |
| Shelf Life | 12 months (under cool & dry sealed storage) |
| Compliance Standards | EU REACH, China GB 33372-2020 |
| Compatible Substrates | Concrete, Wood, Metal, Plastic, Aluminum Alloy, Masonry, Ceramic |
Construction method
1.Remove grease, dust and other substances from the work surface and moisten it;
2.Shake the tank up and down for 1 minute to ensure the raw materials inside are thoroughly mixed and the protective cover is removed;
3.Attach the tank to the gun, open the regulating valve, moderately pull the trigger, and aim the gun head at the gap to fill the foam;
4.During filling, the vertical surface fills from bottom to top, and the horizontal surface fills from one end to the other. Fill to 50% to 80% of the gap, and the remaining space expands to be full with foam:
5.When replacing the material tank, first close the regulating valve, remove the empty tank, quickly attach the already mixed tank to the gun;
6.After using the spray gun, immediately install the special cleaning agent and thoroughly clean the spray gun;
7.This product is not resistant to ultraviolet rays. It needs to be coated with other materials on the foam surface, such as: silicone, gypsum, paint, etc.
Safety Instructions
During construction, please wear protective gloves, clothes, masks and goggles. The construction site should have ventilation conditions.
This product may cause discomfort to the eyes and respiratory system.
The product is harmless to the human body after curing.
Prohibit approaching open flames, prohibit contact with flammable and explosive substances, and prohibit smoking.
Avoid direct sunlight, place it in a cool place, and the temperature should not exceed 50°C. After use, do not burn or puncture the empty tank. Please place the material tank out of the reach of children.
enforce standards
JC/T 936
Storage period
Store in a dry, ventilated and cool place. The shelf life is 9 months from the production date.
Packaging specifications
750ml canned product
FAQ
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1993
Total Annual:
6500000-7500000
Ecer Certification：
Verified Supplier
Wuxi Jungu Technology Co., Ltd. is a professional manufacturer and global supplier of silicone sealants, butyl rubber adhesives, EPDM bonding glue and construction sealing materials, located in Wuxi, Jiangsu Province, China. We integrate independent R&D, modern production, strict quality inspect... Wuxi Jungu Technology Co., Ltd. is a professional manufacturer and global supplier of silicone sealants, butyl rubber adhesives, EPDM bonding glue and construction sealing materials, located in Wuxi, Jiangsu Province, China. We integrate independent R&D, modern production, strict quality inspect...
Get in touch with us
Leave a Message, we will call you back quickly!