Shaanxi Shangyou Stainless Steel Co., Ltd.
| Payment Terms | L/C,D/A,D/P,T/T |
| Section / Geometry | H × B × Tw × Tf |
| Length | Production/mill length or cut-to-length; confirm by section and order |
| Supply Ability | Stock supply, regular production and custom manufacturing available. |
| Grade / Material | 304, 304L, 316, 316L, 2205 and project grades |
| Processing | Cutting, drilling/slots or machining by drawing where confirmed |
| Manufacturing Route | project-built, fabricated or laser-welded H section; rolled route only where actually available |
| Packaging Details | Standard seaworthy export packing with bundles, waterproof wrapping, pallets or wooden cases. |
| Delivery Time | 7-15 |
| Surface | Mill, descaled, pickled, ground, brushed or polished as applicable |
| Standards | ASTM A1069/A1069M when the profile is laser or laser-hybrid welded; EN 10088-3 for general-purpose stainless section delivery where applicable. Structural design and execution requirements remain project-specific. |
| Documents | MTC / EN 10204 3.1 when ordered; additional weld/inspection records by requirement |
| Production Status | Stock, regular production or made-to-order confirmed by grade, section and route |
| Inspection | Dimensional and visual checks; PMI; weld NDT/TPI when specified |
| Model Number | Stainless Steel H Beam in 304 316L and Duplex Custom Structural Sizes |
| Place of Origin | china |
| Certification | ISO9001 |
| Brand Name | Shangyou |
View Detail Information
Explore similar products
Duplex 2205 Stainless Steel Angle for Offshore Structural Supports
ASTM A276 304L Stainless Steel Unequal Angle in Metric Sizes
304 Stainless Steel Angle Bar Hot Rolled Pickled in 6m Lengths
316L Stainless Steel Angle Bar for Marine and Chemical Structures
Product Specification
| Payment Terms | L/C,D/A,D/P,T/T | Section / Geometry | H × B × Tw × Tf |
| Length | Production/mill length or cut-to-length; confirm by section and order | Supply Ability | Stock supply, regular production and custom manufacturing available. |
| Grade / Material | 304, 304L, 316, 316L, 2205 and project grades | Processing | Cutting, drilling/slots or machining by drawing where confirmed |
| Manufacturing Route | project-built, fabricated or laser-welded H section; rolled route only where actually available | Packaging Details | Standard seaworthy export packing with bundles, waterproof wrapping, pallets or wooden cases. |
| Delivery Time | 7-15 | Surface | Mill, descaled, pickled, ground, brushed or polished as applicable |
| Standards | ASTM A1069/A1069M when the profile is laser or laser-hybrid welded; EN 10088-3 for general-purpose stainless section delivery where applicable. Structural design and execution requirements remain project-specific. | Documents | MTC / EN 10204 3.1 when ordered; additional weld/inspection records by requirement |
| Production Status | Stock, regular production or made-to-order confirmed by grade, section and route | Inspection | Dimensional and visual checks; PMI; weld NDT/TPI when specified |
| Model Number | Stainless Steel H Beam in 304 316L and Duplex Custom Structural Sizes | Place of Origin | china |
| Certification | ISO9001 | Brand Name | Shangyou |
Shaanxi Shangyou Stainless Steel Co., Ltd. supplies stainless steel h beam for international B2B projects that require corrosion-resistant structural geometry, dimensional traceability and clear inspection documentation. Buyers should define the product by complete section dimensions rather than by a nominal name alone. For this page, the key RFQ geometry is H × B × Tw × Tf. Length, quantity, surface condition, tolerance and the intended service environment should be stated before quotation so the actual production route can be selected.
The governing standard depends on how the section is produced. ASTM A1069/A1069M when the profile is laser or laser-hybrid welded; EN 10088-3 for general-purpose stainless section delivery where applicable. Structural design and execution requirements remain project-specific. This distinction is important because a material delivery standard does not replace a structural design code, and a hot-rolled specification should not be automatically assigned to a cold-formed or welded built-up shape. The quotation and MTC should identify the agreed product route and standard revision.
Manufacturing may use project-built, fabricated or laser-welded H section; rolled route only where actually available. The route affects corner radius, weld appearance, straightness, dimensional flexibility and cost. Hot-rolled or extruded profiles normally show natural mill radii; formed profiles show bend radii; laser-welded built-up sections can provide sharper corners and independent web/flange thicknesses. If the profile is architecturally exposed, specify weld dressing, grain direction, polishing and surface protection before production.
Grade selection should follow the environment and fabrication route. 304 is a practical general-purpose choice, 316L is preferred where chloride exposure or corrosive washdown is more relevant, and duplex 2205 can provide higher strength and stronger chloride-related corrosion resistance. Special grades such as 2507 or 904L should be offered only after confirming material availability, production route, MOQ and inspection requirements.
Typical applications include Industrial frames, Platforms, Process-plant structures, Architectural exposed frames. Shangyou can coordinate cut-to-length, dimensional inspection, PMI, heat-number traceability and export packing, with project-specified NDT or third-party inspection where required. For an efficient RFQ, send grade, standard, H × B × Tw × Tf, length, quantity, surface, manufacturing-route preference, inspection documents and destination. For load-bearing members, the project engineer must separately confirm design capacity and connection requirements.
Engineering note: Material supply information does not establish structural load capacity. Section properties, connections, buckling and the governing design code must be checked by the project engineer.
| Price Basis | Based on grade, geometry, manufacturing route, surface, length, quantity, processing, inspection and raw-material market conditions. |
|---|---|
| Supply / Lead Time | Confirmed in quotation according to stock, regular production or made-to-order status. |
| Packing | Bundled with protective wrapping and suitable supports; extra separators/protection for finished surfaces. |
| Payment | T/T, L/C or other agreed terms subject to quotation and contract. |
| After-Sales / Claims | Handled against contract specification, heat number, MTC, inspection records and agreed acceptance criteria. |
|
REQUEST A QUOTE | SEND SIZE LIST | UPLOAD DRAWING / MTO | REQUEST MTC 3.1 RFQ: Grade + Standard + Section Dimensions + Length + Quantity + Surface + Inspection + Destination |
|
Send grade, governing standard, H × B × Tw × Tf, length, quantity, surface, tolerance, manufacturing route and inspection/document requirements. A drawing is preferred for non-standard sections.
ASTM A1069/A1069M when the profile is laser or laser-hybrid welded; EN 10088-3 for general-purpose stainless section delivery where applicable. Structural design and execution requirements remain project-specific.
Custom dimensions can be evaluated according to the selected project-built, fabricated or laser-welded H section; rolled route only where actually available route. Feasibility depends on thickness, section stiffness, corner requirements, length and quantity.
Cut-to-length and secondary fabrication can be quoted from drawings. State hole diameter, location, edge distance, tolerance, end condition and any deburring or surface-restoration requirement.
Mill, descaled/pickled, ground, brushed or polished finishes may be available depending on the section and starting route. Internal corners and welds can limit uniform decorative finishing.
No. Material and section supply information does not replace structural calculations. The engineer must verify section properties, loads, buckling, connections and the governing design code.
Yes, project inspection can be arranged when the method, extent, acceptance criteria, document format and witness/hold points are defined before production.
Long profiles are normally bundled with suitable supports and protective wrapping. Finished or visible surfaces may require separators, film or additional protection against abrasion.
No. Stock, regular production and made-to-order status vary by grade, section and manufacturing route. Availability should be confirmed against the actual size list.
Price depends on alloy grade, section geometry, production route, length, quantity, surface finish, machining, inspection, packing and current raw-material conditions.
Company Details
Business Type:
Manufacturer
Year Established:
2022
Total Annual:
>$10 million
Employee Number:
>100
Ecer Certification：
Verified Supplier
About Us Shaanxi Shangyou Stainless Steel Co., Ltd. is a professional stainless steel manufacturer and global supplier specializing in the production and export of stainless steel pipes, sheets, coils, strips, bars, wires, profiles, and nickel alloy products. Our Expertise With exte... About Us Shaanxi Shangyou Stainless Steel Co., Ltd. is a professional stainless steel manufacturer and global supplier specializing in the production and export of stainless steel pipes, sheets, coils, strips, bars, wires, profiles, and nickel alloy products. Our Expertise With exte...
Get in touch with us
Leave a Message, we will call you back quickly!