Big Spangle Hot Dipped Galvanized Steel Coil Z60–Z275 with Soft Commercial

Product Specification

Big Spangle Hot Dipped Galvanized Steel Coil Z60–Z275 with Soft Commercial Grades for Construction and Sheet Processing

1. Product Overview

Hot dipped galvanized steel coil with big spangle surface is commonly used where both corrosion protection and traditional galvanized appearance are required. The zinc layer formed during hot-dip galvanizing helps protect the steel substrate from atmospheric corrosion, while the visible spangle pattern is often preferred in roofing, cladding, and general construction sheet applications.

For soft commercial grades, the product is also suitable for slitting, cut-to-length, roll forming, and general sheet metal processing. In practical use, grade selection, coating level, and surface condition are the main factors influencing forming behavior, outdoor durability, and final appearance.

2. Technical Solution

Product performance is based on the following technical characteristics:

• Continuous hot-dip galvanizing with controlled zinc coating mass
• Zinc coating providing barrier protection and sacrificial protection
• Soft commercial grades supporting forming and sheet processing
• Big spangle surface for visible galvanized appearance
• Optional surface treatment for storage and downstream processing

Yield strength of 195–420 MPa provides dimensional stability for structural and fabricated parts, while elongation of 12–25% supports bending, profiling, and forming without excessive cracking risk.

3. Specifications

4. Application

• Roof panels and roof components
• Wall cladding and outer building panels
• Garage doors and shutters
• Household appliance panels and housings
• Transportation parts and protection panels
• General sheet metal fabrication and construction accessories

5. Processing

• Slitting into narrow strips
• Cut-to-length sheet production
• Roll forming for roofing and profiles
• Bending and folding
• Stamping and light drawing
• Surface coating or painting when required

6. Advantages

• Big spangle surface provides a traditional galvanized appearance
• Soft commercial grades are suitable for common forming operations
• Wide coating range supports different corrosion environments
• Mill edge and slit edge options improve downstream flexibility
• Suitable for coil, sheet, and strip supply
• Compatible with standard industrial handling and processing equipment

7. How to Choose

• Visible roofing or cladding → regular or big spangle is commonly selected
• Painting or cleaner surface requirement → minimized or zero spangle is usually preferred
• Outdoor environment → higher coating such as 180–275 g/m² or above is commonly used
• General roll forming → commercial grades such as SGCC or DX51D+Z are often selected
• Strip processing or controlled width requirement → slit edge is commonly requested

8. FAQ

Q1: What is the difference between big spangle and zero spangle?
Big spangle gives a more visible galvanized pattern, while zero spangle is usually preferred for cleaner appearance and painting applications.

Q2: Is big spangle surface suitable for construction roofing?
Yes, it is commonly used for roofing and cladding where a traditional galvanized finish is acceptable.

Q3: Can the coil be supplied with slit edge?
Yes, both mill edge and slit edge can be supplied depending on downstream processing requirements.

Q4: Which coating level is suitable for outdoor use?
For outdoor construction use, medium to higher coating levels such as 180–275 g/m² or above are commonly selected based on service conditions.

Q5: Is this material suitable for roll forming and sheet processing?
Yes, soft commercial grades with 12–25% elongation are suitable for common sheet metal fabrication and roll forming operations.