508mm ID Hot Dipped Galvanized Steel Coil for Furniture Panels and General Sheet

Product Specification

508mm ID Hot Dipped Galvanized Steel Coil for Furniture Panels and General Sheet Fabrication

1. Product Overview

Hot dipped galvanized steel coil is widely used in furniture panels, cabinet components, signboards, and other fabricated sheet parts that require corrosion resistance and stable forming performance. The zinc coating formed through the hot dip process helps protect the steel surface during storage, transport, and downstream fabrication.

For furniture-related sheet processing, coil stability, surface condition, and compatibility with slitting or cut-to-length lines are often more important than decorative claims. A 508 mm coil ID is commonly used in many strip and sheet processing lines, making the material suitable for continuous production.

2. Technical Solution

Product performance is based on:

• Continuous hot dip galvanizing with controlled zinc coating mass
• Zinc layer providing barrier protection and sacrificial protection
• Cold rolled base supporting flatness and forming consistency
• Passivated, oiled, or anti-finger treatment for storage and handling control
• Balanced mechanical properties for bending, punching, and light fabrication

For furniture panels and light fabricated parts, zinc coating level affects corrosion resistance, while elongation affects bending and forming behavior. Surface treatment also helps reduce oxidation risk before further processing.

3. Specifications

4. Application

• Furniture panels and cabinet parts
• Counters and signboards
• Electrical cabinets and indoor enclosures
• Appliance panels and internal sheet parts
• General cut-to-length sheet processing
• Light industrial fabricated components

5. Processing

• Cut-to-length sheet production
• Slitting into narrow strips
• Bending and folding
• Stamping and punching
• Edge forming and light profiling
• Surface painting or lamination if required

6. Advantages

• 508 mm coil ID is suitable for common slitting and decoiling equipment
• Wide width range supports both strip and sheet production
• 40–450 g/m² coating range covers general indoor to more demanding environments
• Balanced strength and elongation support common forming operations
• Multiple surface treatments improve storage and downstream handling flexibility
• Coil supply improves efficiency in continuous fabrication lines

7. How to Choose

• Furniture panels with visible surface requirements → anti-finger or cleaner surface condition is commonly preferred
• Indoor fabricated parts → medium coating level is often sufficient
• More humid service conditions → higher coating such as Z180–Z275 or above is usually selected
• Narrow strip processing → confirm slit width and line capability first
• Continuous sheet production → confirm coil ID, coil weight, and width with equipment capacity

8. FAQ

Q1: Is 508 mm coil ID suitable for standard processing equipment?
Yes, 508 mm is a common coil ID used in many slitting, decoiling, and cut-to-length lines.

Q2: Can this coil be used for furniture panels?
Yes, it is commonly used for cabinet parts, counters, signboards, and other light fabricated sheet components.

Q3: Can the coil be supplied as sheets or slit strips?
Yes, it can be processed into cut-to-length sheets or narrower strips according to downstream requirements.

Q4: Which surface treatment is suitable before storage and transport?
Passivated or oiled surface is commonly selected to improve temporary corrosion resistance during storage and shipment.

Q5: What zinc coating should be selected for more humid conditions?
Higher coating levels are generally preferred when stronger corrosion resistance is required in humid or semi-exposed environments.