Anti-Finger Hot Dipped Galvanized Steel Coil ASTM A653 / JIS G3302 for Washing

Product Specification

Anti-Finger Hot Dipped Galvanized Steel Coil ASTM A653 / JIS G3302 for Washing Machine Panels and Appliance Fabrication

1. Product Overview

Hot dipped galvanized steel coil for washing machine and appliance fabrication is used where corrosion resistance, stable sheet formability, and controlled surface condition are required. Compared with untreated cold rolled substrate, the zinc-coated surface provides added protection against moisture exposure during storage, transport, and end use.

In appliance manufacturing, anti-finger or passivated surfaces are often preferred because they help maintain a cleaner appearance before stamping, bending, and assembly. For washing machine panels and similar housings, sheet flatness, coating consistency, and downstream paint compatibility are usually more critical than only coating appearance.

2. Technical Solution

Product performance is based on the following technical characteristics:

• Continuous hot dip galvanizing with controlled zinc coating mass
• Zinc coating providing barrier protection and sacrificial protection
• Cold rolled base supporting sheet precision and appliance panel forming
• Anti-finger, chromated, or oiled surface options for storage and handling control
• Balanced mechanical properties for stamping, bending, and shell fabrication

For appliance panels, minimized or zero spangle is often preferred when a cleaner visible surface or additional coating is required. Yield strength and elongation also influence panel forming behavior, corner cracking risk, and dimensional stability after pressing.

3. Specifications

4. Application

• Washing machine outer shells and internal panels
• Refrigerator and appliance housings
• Air conditioner and ventilation panels
• Electrical cabinets and control box parts
• Roofing and light building sheets
• General cut-to-length and stamped sheet fabrication

5. Processing

• Cut-to-length sheet production
• Slitting into appliance-width strips
• Stamping and panel pressing
• Bending and edge forming
• Punching and assembly preparation
• Surface painting or lamination when required

6. Advantages

• Anti-finger and passivated surface options are suitable for appliance sheet handling
• Wide zinc coating range supports both indoor appliance use and construction applications
• Cold rolled base helps maintain dimensional consistency in stamped parts
• Multiple spangle options allow selection by appearance and finishing requirement
• Standard coil dimensions fit common decoiling, slitting, and cut-to-length lines
• Suitable for both appliance fabrication and general galvanized sheet processing

7. How to Choose

• Washing machine and visible appliance panels → minimized or zero spangle is commonly preferred
• Cleaner handling before assembly → anti-finger surface is often selected
• Storage before processing → passivated or oiled surface is commonly used
• General indoor appliance use → medium coating levels are often sufficient
• Outdoor or more humid service → higher coating such as 180–275 g/m² or above is commonly selected

8. FAQ

Q1: Why is anti-finger surface commonly used for washing machine panels?
Because it helps reduce visible handling marks and keeps the sheet surface cleaner before forming and assembly.

Q2: Which spangle type is usually preferred for appliance housings?
Minimized spangle or zero spangle is commonly selected when a more uniform appearance or later painting is required.

Q3: Can this coil be processed into appliance sheets?
Yes, it can be cut to length or slit into narrower strips for panel pressing and shell fabrication.

Q4: Is this product only for appliances?
No, it is also used for roofing, electrical cabinets, ventilation panels, and general sheet metal fabrication.

Q5: Which standards apply to this galvanized coil?
Common standards include ASTM A653, JIS G3302, and EN 10147 depending on order specification and market requirement.