Regular Spangle Galvalume Steel Coil ASTM A792 / JIS G3321 for Container Plate

Product Specification

Regular Spangle Galvalume Steel Coil ASTM A792 / JIS G3321 for Container Plate and Construction Use

1.Product Overview

Regular spangle galvalume steel coil is mainly used where corrosion resistance, heat reflectivity, and stable sheet processing are required in the same product. Compared with conventional zinc-coated material, the aluminum-zinc coating system offers a different surface protection mechanism and is often selected for container-related sheet parts, building panels, and light industrial fabrication.

For this product type, the combination of 914–1250 mm width and coil supply format supports standard slitting, cut-to-length, and roll forming lines. Regular spangle is typically used when a normal metallic surface appearance is acceptable in the final application.

2.Technical Solution

Product performance is based on:

• Hot dip Al-Zn coating with controlled AZ coating mass
• Aluminum component improving heat resistance and reflective performance
• Zinc component supporting sacrificial protection at cut edges
• Regular spangle surface for standard visible metallic finish
• Passivated, oiled, or anti-finger treatment for storage and downstream handling

In practical use, AZ coating level directly affects corrosion resistance and outdoor durability. The Al-Zn surface is also valued in applications where thermal reflective performance and stable surface condition are important.

3.Specifications

4.Application

• Container plate and fabricated sheet parts
• Roofing sheets and wall cladding panels
• Machine covers and light structural enclosures
• Appliance outer panels and back panels
• Agricultural sheds, silos, and greenhouse sheet parts
• General cut-to-length and roll formed sheet products

5.Processing

• Cut-to-length sheet production
• Slitting into narrow strips
• Roll forming for roofing and wall profiles
• Bending and profiling
• Punching and assembly preparation
• Surface painting or further coating if required

6.Advantages

• Al-Zn coating provides better corrosion resistance in many outdoor environments
• Regular spangle surface suits standard visible sheet applications
• 914–1250 mm width range matches common roll forming and sheet lines
• AZ coating options cover different service life requirements
• Passivated, oiled, and anti-finger surfaces improve storage and processing flexibility
• Coil format helps improve material utilization in continuous fabrication

7.How to Choose

• Container plate or outdoor panel use → higher coating such as AZ100–AZ180 is commonly preferred
• Standard visible metallic finish → regular spangle is commonly selected
• Longer storage before processing → passivated or oiled surface is often used
• Further painting or coating → anti-finger surface can be considered
• Continuous production line → confirm width, coil ID, and coil weight with equipment capacity

8.FAQ

Q1: Is JIS G3321 used for galvanized steel coil or galvalume steel coil?
JIS G3321 is commonly associated with hot dipped aluminum-zinc coated steel, so this specification belongs to galvalume steel coil.

Q2: Why is regular spangle used on galvalume coil?
It provides a standard metallic surface appearance that is acceptable for many construction and industrial sheet applications.

Q3: Can this coil be processed into sheets or strips?
Yes, it can be cut to length or slit into narrower strips according to downstream processing requirements.

Q4: What AZ coating level is suitable for outdoor use?
Higher coating levels such as AZ100–AZ180 are commonly selected when better corrosion resistance is required.

Q5: Is this product suitable for roofing and container-related fabrication?
Yes, it is commonly used for roofing sheets, wall panels, and sheet parts requiring corrosion resistance and stable forming performance.