Full Hard Spangle Hot Dipped Galvanized Steel Coil ASTM A653 / SGCH / Q195 for

1. Product Overview

Full hard hot dipped galvanized steel coil is mainly used in applications where higher rigidity, stable surface condition, and continuous forming performance are required. Compared with softer commercial grades, full hard material is commonly selected for roll forming, roofing profiles, corrugated panels, and light structural sheet products where shape retention is important after profiling.

The zinc coating formed by hot dip galvanizing provides corrosion protection for building materials exposed to outdoor humidity, rainwater, and general atmospheric conditions. Spangle options such as regular, minimized, big, and zero spangle also allow adjustment of surface appearance according to visible end use and downstream finishing requirements.

2. Technical Solution

Product performance is based on the following technical characteristics:

• Full hard substrate for higher rigidity and profile retention
• Hot dip galvanizing with controlled zinc coating weight
• Zinc layer providing barrier protection and sacrificial protection
• Multiple spangle options for appearance and application matching
• Passivated, oiled, or anti-finger treatment for storage and processing needs

For building materials and formed sheet products, full hard material is often chosen when the end use requires better stiffness after roll forming. At the same time, the galvanized coating helps extend service life by reducing surface corrosion risk in exposed environments.

3. Specifications

4. Application

• Roof panels and roof components
• Outer wall panels for industrial and civil buildings
• Garage doors and rolling shutters
• Corrugated sheet and roll formed profiles
• Electrical cabinets and industrial enclosures
• General building material and sheet fabrication

5. Processing

• Cut-to-length sheet production
• Slitting into strips
• Corrugating and roofing profile forming
• Roll forming for purlins and light profiles
• Bending and profiling
• Surface painting or further coating when required

6. Advantages

• Full hard grades are suitable for roll forming and profile retention
• Wide width range supports roofing and building material production
• Spangle options allow different visible surface effects
• Zinc coating range covers general to higher corrosion protection needs
• Standard coil ID is compatible with common decoiling and profiling equipment
• Surface treatment options improve storage stability and downstream handling

7. How to Choose

• Roofing and corrugated sheet production → SGCH or other full hard grades are commonly selected
• Visible galvanized appearance → regular or big spangle is often preferred
• Painting or cleaner surface requirement → zero or minimized spangle is usually selected
• Outdoor building use → medium to higher coating such as 180–275 g/m² or above is commonly used
• Continuous roll forming lines → confirm coil ID, coil weight, and width with equipment requirements

8. FAQ

Q1: What is the advantage of full hard galvanized coil?
Full hard material offers better rigidity and is commonly used for roofing sheets, corrugated panels, and roll formed building products.

Q2: Which spangle type is suitable for visible building panels?
Regular spangle or big spangle is often selected when a traditional galvanized appearance is required.

Q3: Can the coil be slit or cut to length?
Yes, cutting and slitting can be arranged according to downstream processing requirements.

Q4: What zinc coating is commonly used for building materials?
For building applications, medium to higher coating levels such as 120–275 g/m² or above are commonly selected depending on service

conditions.

Q5: Is this product suitable for roofing and wall cladding?
Yes, full hard galvanized coil is widely used for roofing, wall panels, and other building material applications.