DX51D Zinc Coated Cold Rolled Hot Dipped Galvanized Steel Coil for Furniture

Product Specification

DX51D Zinc Coated Cold Rolled Hot Dipped Galvanized Steel Coil for Furniture Panels and Appliance Fabrication

1. Product Overview

DX51D hot dipped galvanized steel coil is commonly used in furniture panels, cabinet parts, appliance housings, and general fabricated sheet components that require corrosion resistance together with stable forming performance. The zinc layer formed by hot dip galvanizing helps reduce oxidation during storage, transport, and downstream processing.

For cold rolled base galvanized material, buyers usually focus on coating mass, surface condition, and process stability in slitting, cut-to-length, bending, and stamping operations. This makes the product suitable for both visible sheet parts and structural inner panels.

2. Technical Solution

Product performance is based on:

• Continuous hot dip galvanizing with controlled zinc coating mass
• Zinc layer providing barrier protection and sacrificial protection
• Cold rolled base supporting flatness and dimensional consistency
• Passivated, oiled, or anti-finger surface treatment for storage and handling control
• Balanced mechanical properties for bending, punching, and light fabrication

For furniture and appliance fabrication, surface consistency and formability are usually more important than only coating appearance. The zinc layer protects the surface, while elongation and strength help maintain processing stability in folded and stamped parts.

3. Specifications

4. Application

• Furniture panels and cabinet components
• Lampshades, counters, and signboards
• Washing machine, refrigerator, and appliance housings
• Electrical cabinets and industrial enclosures
• Cut-to-length sheet fabrication
• General galvanized sheet processing for indoor and semi-exposed use

5. Processing

• Cut-to-length sheet production
• Slitting into narrower strips
• Bending and folding
• Stamping and punching
• Edge forming and light profiling
• Surface painting or lamination if required

6. Advantages

• Cold rolled base supports stable surface flatness for panel fabrication
• Wide zinc coating range covers general indoor to more demanding service conditions
• Passivated, oiled, and anti-finger options improve storage and downstream handling
• Standard coil dimensions fit common decoiling, slitting, and cut-to-length lines
• Balanced strength and elongation support common furniture and appliance forming operations
• Suitable for both visible outer panels and inner structural sheet parts

7. How to Choose

• Visible furniture or appliance panels → minimized or zero-spangle related surface preference is commonly considered in downstream orders
• Longer storage before processing → passivated or oiled surface is commonly selected
• Cleaner handling before assembly → anti-finger surface can be considered
• Indoor fabricated parts → medium coating is often sufficient
• More humid or semi-exposed conditions → higher zinc coating such as Z180–Z275 or above is usually preferred

8. FAQ

Q1: Is this product suitable for furniture and cabinet fabrication?
Yes, it is widely used for panels, counters, cabinet parts, and other light fabricated galvanized sheet components.

Q2: Can the coil be supplied for cut-to-length sheet production?
Yes, it can be processed into sheets or slit strips according to downstream production requirements.

Q3: Why is anti-finger surface used on galvanized coil?
Anti-finger treatment helps reduce handling marks and keeps the sheet surface cleaner before fabrication or assembly.

Q4: Is DX51D suitable for bending and stamping?
Yes, DX51D is commonly used for general sheet forming applications where stable bending and processing performance are required.

Q5: What standards are commonly used for this galvanized steel coil?
Common reference standards include ASTM A653, JIS G3302, and EN 10147 depending on order specification and market requirement.