Hefei Purple Horn E-Commerce Co., Ltd.
| Operating Temperature | -20℃~+70℃ |
| Card Connection Mode | 自弹式 |
| Rated Voltage (Max) | 5V |
| Height Above Board | 2mm |
| Card Detection | 有 |
| Connector Type | 卡座 |
| Card Type | MicroSD卡(TF卡) |
| Description | -20℃~+70℃ Push-Push 2mm Connector and Ejector MicroSD Card (TF Card) SMD PC Card Sockets RoHS |
| Mfr. Part # | HX TF PUSH |
| Package | SMD |
| Model Number | HX TF PUSH |
View Detail Information
Explore similar products
Surface Mount CompactFlash Header with High Temperature Thermoplastic Insulation
High precision connector model JBL JBL-102312862 designed ensuring stable
SOFNG SIM 019B P6 Mini SIM Card Socket SMT Mounting Push Push Normally Closed
Low Profile CompactFlash Type I CF Card Header SMT with Long Guides and Inverse
Product Specification
| Operating Temperature | -20℃~+70℃ | Card Connection Mode | 自弹式 |
| Rated Voltage (Max) | 5V | Height Above Board | 2mm |
| Card Detection | 有 | Connector Type | 卡座 |
| Card Type | MicroSD卡(TF卡) | Description | -20℃~+70℃ Push-Push 2mm Connector and Ejector MicroSD Card (TF Card) SMD PC Card Sockets RoHS |
| Mfr. Part # | HX TF PUSH | Package | SMD |
| Model Number | HX TF PUSH |
This product specification defines the performance and testing methods for the T-FLASH card socket, designed and manufactured by Shenzhen Hanxia Electronic Co., Ltd. It is suitable for various electronic applications requiring a T-Flash card interface.
| Item | Requirements | Test Methods |
| 1. Confirmation of Product | ||
| 2. Contact resistance (Low Level) | 100 m Max. initial | Subject mated contacts assembled in housing to closed circuit of 10 mA max. at open circuit voltage of 20 mV max. |
| 3. Insulation resistance | 1000 M Min. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. MIL-STD-202, Method 302, Condition B (500 V DC10%). |
| 4. Dielectric Strength | 500 V AC for 1 minute. Current leakage must be 1.0 mA max. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. MIL-STD-202, Method 301. |
| 5. Durability (Repeated Mating/Unmating) | Contact Resistance: 100 m Max. after testing | Mate and unmate connector for 5000 cycles. |
| 6. Temperature rise | 30C Max. | Carry rated current load. 0.3A per contact. (UL498) |
| 7. Vibration Sinusoidal Low Frequency | No electrical discontinuity greater then 1 sec (s) shall occur. Contact resistance: 100 m max. | Subject mated connector to 10-55-10 Hz traversed in 1 minute at 1.5 mm amplitude 2 hours each of 3 mutually perpendicular plane, 10 mA applied. MIL-STD-202, Method 201. |
| 8. Shock | No electrical discontinuity greater than 1 sec. shall occur. No damage to product. | Applying an appropriate holder is allowed in vibration test and shock test. MIL-STD-202, Method 213, 490m/s2, 3 axes. |
| 9. Thermal shock | No damage, Contact Resistance (Low Level) (Final) 100 mmax. | Temperature range from -55C to +85C. Start from -55C. After 30 min. change to +85C, change time is no more than 30 seconds. Total 5 cycles. MIL-STD-202, Method 107D, condition A. |
| 10. Humidity | No damage, Contact Resistance (Low Level) (Final) 100 mmax. Dielectric Strength should be OK, Insulation Resistance should be 100 M min. | Temperature :402C 96 hours. Relative humidity: 90-95%; Duration: 96 Hours. MIL-STD-202, Method 103. |
| 11. Solderability | Appearance of the specimen shall be inspected after the test with the assistance of a magnifier capable of giving a magnification of 10 X for any damage such as pinholes, void or rough surface. | Soldering time: 3 to 5 Seconds Temperature: 2555C. |
| 12. Resistance to soldering heat | No damage | Leave subject product in the 2555C chamber for 2 minutes. |
| 13. Salt Spray | Contact Resistance (Low Level) (Final) 100 mmax. | 51% salt concentration 244 hours 35 2C MIL-STD-202, Method 101 Condition B. |
| 14. High temperature | Contact resistance: 100 m max. | Subject product to 852C for 96 hours continuously. MIL-STD-202, Method 108. |
| Parameter | Reference Specification |
| Average temperature gradient in preheating | 2.5C/s |
| Soak time tsoak | 2-3 minutes |
| Time above 217C t1 | 60 s |
| Time above 230C t2 | 50 s |
| Time above 255C t3 | 5 s |
| Peak temperature in reflow Tpeak | 255C (+5/-0C) |
| Temperature gradient in cooling | Max -5C/s |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
<300
Ecer Certification：
Verified Supplier
Hefei Purple Horn E-Commerce Co., Ltd. is a professional company focus on integrated circuit ic business. Hefei Purple Horn E-Commerce Co., Ltd. will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Fou... Hefei Purple Horn E-Commerce Co., Ltd. is a professional company focus on integrated circuit ic business. Hefei Purple Horn E-Commerce Co., Ltd. will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Fou...
Get in touch with us
Leave a Message, we will call you back quickly!