Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -20℃~+70℃ |
| Card Connection Mode | 自弹式 |
| Card Detection | 有 |
| Connector Type | 卡座 |
| Card Type | MicroSD卡(TF卡) |
| Description | Connector and Ejector Push-Push Surface Mount |
| Mfr. Part # | HX TF-01A |
| Package | SMD |
| Model Number | HX TF-01A |
View Detail Information
Explore similar products
Surface Mount CompactFlash Header with High Temperature Thermoplastic Insulation
High precision connector model JBL JBL-102312862 designed ensuring stable
SOFNG SIM 019B P6 Mini SIM Card Socket SMT Mounting Push Push Normally Closed
Low Profile CompactFlash Type I CF Card Header SMT with Long Guides and Inverse
Product Specification
| Operating Temperature | -20℃~+70℃ | Card Connection Mode | 自弹式 |
| Card Detection | 有 | Connector Type | 卡座 |
| Card Type | MicroSD卡(TF卡) | Description | Connector and Ejector Push-Push Surface Mount |
| Mfr. Part # | HX TF-01A | Package | SMD |
| Model Number | HX TF-01A |
This product specification defines the product performance and test methods for the T-FLASH card holder connector, designed and manufactured by Shenzhen Hanxia Electronic Co., Ltd. It is suitable for various applications requiring reliable connection and compliance with industry standards.
| Item | Requirements | Test Methods |
| 1. Confirmation of Product | Product shall be conforming to the requirements of applicable product drawing. | Visually, dimensions and functionally inspected per applicable product drawing. |
| 2. Contact resistance (Low Level) | 40 m Max. initial | Subject mated contacts assembled in housing to closed circuit of 10 mA max. at open circuit voltage of 20 mV max. |
| 3. Insulation resistance | 1000 M Min. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. MIL-STD-202, Method 302, Condition B (500 V DC10%). |
| 4. Dielectric Strength | Connector must withstand test potential of 500 V AC for 1 minute. Current leakage must be 1.0 mA max. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. MIL-STD-202, Method 301. |
| 5. Durability (Repeated Mating/Unmating) | Contact Resistance: 100 m Max. after testing | Mate and unmate connector for 5000 cycles. |
| 6. Temperature rise | 30 C Max. | Carry rated current load (0.3A per contact) (UL498). |
| 7. Vibration Sinusoidal Low Frequency | No electrical discontinuity greater than 1 sec (s) shall occur. Contact resistance: 100 m max. | Subject mated connector to 10-55-10 Hz traversed in 1 minute at 1.5 mm amplitude 2 hours each of 3 mutually perpendicular planes, 10 mA applied. MIL-STD-202, Method 201. |
| 8. Shock | No electrical discontinuity greater than 1 sec (s) shall occur. No damage to product. | Applying an appropriate holder is allowed in vibration test and shock test. MIL-STD-202, Method 213, 490 m/s, 3 axes. |
| 9. Thermal shock | No damage, Contact Resistance (Low Level) (Final) 100 m max. | Temperature range from -55C to +85C. After 30 min. change to +85C, change time is no more than 30 seconds. Total 5 cycles. MIL-STD-202, Method 107D, condition A. |
| 10. Humidity | No damage, Contact Resistance (Low Level) (Final) 100 m max. Dielectric Strength should be OK, Insulation Resistance should be 100 M min. | Temperature: 40 2 C 96 hours. Relative humidity: 90-95%; Duration: 96 Hours. MIL-STD-202, Method 103. |
| 11. Solderability | Appearance of the specimen shall be inspected after the test with the assistance of a magnifier capable of giving a magnification of 10 X for any damage such as pinholes, void or rough surface. | Soldering time: 3 to 5 Seconds. Temperature: 2555C. |
| 12. Resistance to soldering heat | No damage | Leave subject product in the 2555C chamber for 2 minutes. |
| 13. Salt Spray | Contact Resistance (Low Level) (Final) 100 m max. | 51% salt concentration 24 4 hours 35 2C. MIL-STD-202, Method 101 Condition B. |
| 14. High temperature | Contact resistance: 100 m max. | Subject product to 852C for 96 hours continuously. MIL-STD-202, Method 108. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!