Shenzhen ECER Network Technology Co., Ltd.
| Operating Temperature | -20℃~+70℃ |
| Card Connection Mode | 自弹式 |
| Height Above Board | 1.8mm |
| Card Detection | 有 |
| Connector Type | 卡座 |
| Card Type | MicroSD卡(TF卡) |
| Description | Micro SD card (TF card) Connector and Ejector Push-Push Surface Mount |
| Mfr. Part # | HX TF-CARD H1.8 |
| Package | SMD |
| Model Number | HX TF-CARD H1.8 |
View Detail Information
Explore similar products
Surface Mount CompactFlash Header with High Temperature Thermoplastic Insulation
High precision connector model JBL JBL-102312862 designed ensuring stable
SOFNG SIM 019B P6 Mini SIM Card Socket SMT Mounting Push Push Normally Closed
Low Profile CompactFlash Type I CF Card Header SMT with Long Guides and Inverse
Product Specification
| Operating Temperature | -20℃~+70℃ | Card Connection Mode | 自弹式 |
| Height Above Board | 1.8mm | Card Detection | 有 |
| Connector Type | 卡座 | Card Type | MicroSD卡(TF卡) |
| Description | Micro SD card (TF card) Connector and Ejector Push-Push Surface Mount | Mfr. Part # | HX TF-CARD H1.8 |
| Package | SMD | Model Number | HX TF-CARD H1.8 |
The HX TF-CARD H1.8 is a TF card socket designed and manufactured by Shenzhen Hanxia Electronic Co., Ltd. This product specification outlines its characteristics and testing methods.
| Part No. | Product Name | Rev. | Page No. | Scope | Reference Documents | Product Dimension | PCB/Panel Layout | Material | Mechanical & Electrical Characteristic | Packaging | Marking | Transportation | Storage | Environmental Requirements | Solderability | Resistance to Solder Heat | Cleaning | Performance and Test Description | Quality Assurance Provisions | Performance Requirements | Test Condition | Sample Selection | Test Sequence |
| HX TF-CARD H1.8 | TF Card Socket | A/0 | 1/8 | This product specification specifies the characteristics and test methods of the connector products designed and manufactured by the Company. | MIL-STD-1344A, MIL-STD-202F, EIA364, JIS C 0051, MIL-G-45204C, IEC-512-3, QQ-N-290A, MIL-P-81728A, MIL-T-10727B, UL498, EN/ISO5961, EN1122, EN13346, EPA3052 | As shown in customer drawing. | Recommended PCB layout is shown in customer drawing. | Harmful material can follow the requirement of RoHS. | As described in Table I. | Packaged according to requirements specified in purchase order for safe delivery. Products required tray or carrier tape should meet the proper specification per purchase order. Connector container and the packaging specification is shown in customer drawing. | Manufacturers name, industry recognized logo, or customer approved marks. | Any vehicle can be adopted for the transportation, but moisture-proof and no mechanical damage. | Temperature: -20~+70, Relative humidity: 80%, Not to storage in corrosive environments. A re-qualification test shall be conducted immediately while the storage duration exceed 6 months. | Connectors solderability can meet MIL-STD-202F standard. Finish shall be free of contaminants. | Wave Soldering: Preheat (not exceed 4/sec, final preheat within 125 of solder temp), Soldering (250 max for 5 sec), Cool Down (ambient air at 20-25). Infrared Reflow: Preheat (not exceed 4/sec), Soldering (max 90 sec above 183, max 260 for 10 sec), Cool Down (not exceed 6/sec). | Connectors resist to cleaning process. Aqueous Cleaning: Three cycles; each cycle consisting of a maximum of one minute exposure to 54 to 66 demineralized tap water at a maximum pressure of 30 psi; followed by air drying for 60 to 90 seconds at 93 to 121. | Product is designed to meet electrical, mechanical, and environmental performance requirements specified in Table I. | Company is responsible for the quality of the part as it is delivered to customer. Failing lots will be return or other supplier corrective action. | Contact resistance: 40 m Max. initial. Insulation resistance: 1000 M Min. Dielectric Strength: 500 V AC for 1 minute, 1.0 mA max. leakage. Durability: Contact Resistance: 150 m Max. after 5000 cycles. Temperature rise: 30C Max. at 0.3A per contact. | Unless otherwise specified, all tests shall be performed at ambient environmental conditions. | Test samples shall be selected at random from current production. No test samples shall be reused. Samples are pre-conditioned with 10 cycles of durability. Each group shall be containing 5 test samples. | Products qualification test sequence as shown in Table II. | |
| HX TF-CARD H1.8 | TF Card Socket | A/0 | 2/8 | ||||||||||||||||||||
| HX TF-CARD H1.8 | TF Card Socket | A/0 | 3/8 | ||||||||||||||||||||
| HX TF-CARD H1.8 | TF Card Socket | A/0 | 4/8 | ||||||||||||||||||||
| HX TF-CARD H1.8 | TF Card Socket | A/0 | 5/8 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Total Annual:
10000000-50000000
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability... Your Trusted Source for Integrated Circuit Shenzhen ECER Network Technology Co., Ltd. is a professional company focus on integrated circuit ic business. ECER connects buyers worldwide with verified manufacturers across 40+ industries. Every component sourced with precision, quality, and reliability...
Get in touch with us
Leave a Message, we will call you back quickly!