Hefei Purple Horn E-Commerce Co., Ltd.
| Operating Temperature | -40℃~+70℃ |
| Card Connection Mode | 自弹式 |
| Height Above Board | 1.5mm |
| Connector Type | 卡座 |
| Card Type | MicroSIM卡 |
| Description | Card Connector MICRO SIM Push-Push Surface Mount |
| Mfr. Part # | HX MICRO SIM 8+1P H1.5 |
| Package | SMD |
| Model Number | HX MICRO SIM 8+1P H1.5 |
View Detail Information
Explore similar products
Surface Mount CompactFlash Header with High Temperature Thermoplastic Insulation
High precision connector model JBL JBL-102312862 designed ensuring stable
SOFNG SIM 019B P6 Mini SIM Card Socket SMT Mounting Push Push Normally Closed
Low Profile CompactFlash Type I CF Card Header SMT with Long Guides and Inverse
Product Specification
| Operating Temperature | -40℃~+70℃ | Card Connection Mode | 自弹式 |
| Height Above Board | 1.5mm | Connector Type | 卡座 |
| Card Type | MicroSIM卡 | Description | Card Connector MICRO SIM Push-Push Surface Mount |
| Mfr. Part # | HX MICRO SIM 8+1P H1.5 | Package | SMD |
| Model Number | HX MICRO SIM 8+1P H1.5 |
This document specifies the characteristics and test methods for the HX MICRO SIM 8+1P H1.5 connector, designed and manufactured by Shenzhen Hanxia Electronic Co., Ltd. This product is a SIM card holder designed for various electronic applications requiring reliable connectivity.
| Item | Requirements | Test Methods |
| Product Confirmation | Product shall be conforming to the requirements of applicable product drawing. | Visually, dimensions and functionally inspected per applicable product drawing. |
| Contact resistance (Low Level) | 150 m Max. initial | Subject mated contacts assembled in housing to closed circuit of 10 mA max. at open circuit voltage of 20 mV max. |
| Insulation resistance | 1000 M Min. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. MIL-STD-202, Method 302, Condition B (100 V DC10%). |
| Dielectric Strength | 500 V AC for 1 minute. Current leakage must be 1.0 mA max. | Measure by applying test potential between the adjacent contacts, and between the contacts and ground in the mated connector. MIL-STD-202, Method 301. |
| Durability (Repeated Mating/Unmating) | Contact Resistance: 100 m Max. after testing | Mate and unmate connector for 1500 cycle |
| Temperature rise | 30C Max. | Carry rated current load. 0.3A per contact. (UL498) |
| Vibration Sinusoidal Low Frequency | No electrical discontinuity greater then |
Connectors solderability can meet MIL-STD-202F standard. Finish shall be free of contaminants.
Note: Device temperature measurements are referenced from the top-center of the package outer surface.
Connectors resist to cleaning process. Aqueous Cleaning: Three cycles; each cycle consisting of a maximum of one minute exposure to 54 to 66 demineralized tap water at a maximum pressure of 30 psi; followed by air drying for 60 to 90 seconds at 93 to 121.
Temperature: -20~+70, Relative humidity: 80%, Not to storage in corrosive environments. A re-qualification test shall be conducted immediately while the storage duration exceed 6 months.
Any vehicle can be adopted for the transportation, but moisture-proof and no mechanical damage.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
<300
Ecer Certification：
Verified Supplier
Hefei Purple Horn E-Commerce Co., Ltd. is a professional company focus on integrated circuit ic business. Hefei Purple Horn E-Commerce Co., Ltd. will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Fou... Hefei Purple Horn E-Commerce Co., Ltd. is a professional company focus on integrated circuit ic business. Hefei Purple Horn E-Commerce Co., Ltd. will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Fou...
Get in touch with us
Leave a Message, we will call you back quickly!