Dengfeng (XinXing) Trading Co., Limited
| Packaging Details | original packing |
| Process Connection / Stem | 1/2-20 UNF / 318 mm Rigid Stem with 457 mm Flexible Capillary |
| Pressure Range | 0–350 bar / <±0.5% FS |
| Ordering Requirement | Match F007788, the code-5 rigid stem, 350 bar scaling, complete suffix, Type J channel and mating connector |
| Supply Ability | 2 Units per Month |
| Product Type | Extended-Stem Melt Pressure and Temperature Transmitter |
| Electrical Output / Interface | 2-Wire 4–20 mA / Type J Thermocouple / 6-Pin Connector |
| Payment Terms | T/T |
| Series / Control Platform | ME2 Series / Mercury-Filled Pressure Transmission |
| Delivery Time | 7-14 Days |
| Model | ME2-6-M-B35D-1-5-D 2130X000X00 |
| Brand | Gefran |
| Model Number | ME2-6-M-B35D-1-5-D 2130X000X00 |
| Place of Origin | USA |
| Brand Name | Gefran |
View Detail Information
Explore similar products
Gefran ME2-6-M-B01M-1-4-D 2130X000X00 F007766 Melt Transmitter Type J
Gefran ME2-6-M-B05C-1-4-D 2130X000X00 / F007769 Melt Transmitter Type J
Gefran ME2-6-M-B07C-1-5-D 2130X000X00 Melt Transmitter Type J
Gefran ME2-6-M-B01C-1-5-D 2130X000X00 F007762 Melt Transmitter Type J
Product Specification
| Packaging Details | original packing | Process Connection / Stem | 1/2-20 UNF / 318 mm Rigid Stem with 457 mm Flexible Capillary |
| Pressure Range | 0–350 bar / <±0.5% FS | Ordering Requirement | Match F007788, the code-5 rigid stem, 350 bar scaling, complete suffix, Type J channel and mating connector |
| Supply Ability | 2 Units per Month | Product Type | Extended-Stem Melt Pressure and Temperature Transmitter |
| Electrical Output / Interface | 2-Wire 4–20 mA / Type J Thermocouple / 6-Pin Connector | Payment Terms | T/T |
| Series / Control Platform | ME2 Series / Mercury-Filled Pressure Transmission | Delivery Time | 7-14 Days |
| Model | ME2-6-M-B35D-1-5-D 2130X000X00 | Brand | Gefran |
| Model Number | ME2-6-M-B35D-1-5-D 2130X000X00 | Place of Origin | USA |
| Brand Name | Gefran |
Gefran ME2-6-M-B35D-1-5-D 2130X000X00, material code F007788, is a 350 bar melt pressure and temperature transmitter distinguished by its 318 mm rigid stem. It combines a mercury-filled 4–20 mA pressure channel with a Type J thermocouple and is intended for heated polymer machinery where the standard 153 mm stem does not provide the required mechanical reach or thermal separation.
This product must not be merged with ME2-6-M-B35D-1-4-D 2130X000X00, code F007783. Both have a 350 bar pressure range, but F007783 uses rigid-stem code 4 at 153 mm, while F007788 uses code 5 at 318 mm. The longer stem changes installation depth, clearance requirements and the location of the flexible transition. It is therefore a separate product page and a separate ordering configuration.
| Model | ME2-6-M-B35D-1-5-D 2130X000X00 |
| Order Number | F007788 |
| Pressure Range | 0–350 bar; nominal 5000 psi class |
| Accuracy Class | M, less than ±0.5% FS |
| Pressure Output | Two-wire 4–20 mA |
| Supply Voltage | 10–30 VDC |
| Temperature Element | Type J thermocouple |
| Connector | 6-pin; IP65 with the correct mating connector |
| Thread | 1/2-20 UNF |
| Rigid Stem | 318 mm / 12.5 inches |
| Flexible Capillary | 457 mm / 18 inches |
| Maximum Diaphragm Temperature | 400°C |
Measure the available straight-line clearance before installation and confirm that the heater arrangement, insulation and guarding can accommodate the extended rigid section. Route the flexible capillary without twisting or sharply bending it. Manufacturer documentation specifies a maximum installation tightening torque of 56 Nm for the standard 1/2-20 UNF geometry; the diaphragm must never be used as a contact point for cleaning or alignment tools.
Configure the pressure channel for 0 bar at 4 mA and 350 bar at 20 mA. Connect the Type J thermocouple to a dedicated compatible input, preserving polarity and cold-junction compensation. Verify both measurements independently during controlled machine warm-up before enabling pressure-dependent shutdown or alarm functions.
ME2-6-M-B35D-1-4-D 2130X000X00 (F007783) is the shorter-stem 350 bar version. ME2-6-H-B35D-1-5-D 2130X000X00 (F007758) uses the higher H accuracy class. ME2-6-M-B05C-1-5-D 2130X000X00 (F027176) retains the long stem but increases the range to 500 bar. Related models are provided for family reference only and are not automatically interchangeable.
Specify F007788 and the complete model. Confirm the 318 mm stem, flexible length, pressure scaling, Type J temperature channel, connector, cable scope, documentation and product condition before purchase. Suggested pricing does not indicate current inventory or delivery time.
Company Details
Business Type:
Exporter,Trading Company,Seller
Year Established:
2024
Total Annual:
1000000-1500000
Employee Number:
10~25
Ecer Certification：
Site Member
Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h... Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h...
Get in touch with us
Leave a Message, we will call you back quickly!