Dengfeng (XinXing) Trading Co., Limited
| Packaging Details | original packing |
| Process Connection / Stem | 1/2-20 UNF / 318 mm Rigid Stem with 457 mm Flexible Capillary |
| Pressure Range | 0–100 bar / <±0.5% FS |
| Brand | Gefran |
| Ordering Requirement | Confirm F007762, 100 bar scaling, code-5 rigid stem, Type J thermocouple, connector wiring and complete suffix |
| Supply Ability | 2 Units per Month |
| Product Type | Low-Range Melt Pressure and Temperature Transmitter |
| Electrical Output / Interface | 2-Wire 4–20 mA / Type J Thermocouple / 6-Pin Connector |
| Payment Terms | T/T |
| Series / Control Platform | ME2 Series / Mercury-Filled Pressure Transmission |
| Delivery Time | 7-14 Days |
| Model | ME2-6-M-B01C-1-5-D 2130X000X00 / F007762 |
| Model Number | ME2-6-M-B01C-1-5-D 2130X000X00 / F007762 |
| Place of Origin | USA |
| Brand Name | Gefran |
View Detail Information
Explore similar products
Gefran ME2-6-M-B01M-1-4-D 2130X000X00 F007766 Melt Transmitter Type J
Gefran ME2-6-M-B35D-1-5-D 2130X000X00 Melt Transmitter Type J
Gefran ME2-6-M-B05C-1-4-D 2130X000X00 / F007769 Melt Transmitter Type J
Gefran ME2-6-M-B07C-1-5-D 2130X000X00 Melt Transmitter Type J
Product Specification
| Packaging Details | original packing | Process Connection / Stem | 1/2-20 UNF / 318 mm Rigid Stem with 457 mm Flexible Capillary |
| Pressure Range | 0–100 bar / <±0.5% FS | Brand | Gefran |
| Ordering Requirement | Confirm F007762, 100 bar scaling, code-5 rigid stem, Type J thermocouple, connector wiring and complete suffix | Supply Ability | 2 Units per Month |
| Product Type | Low-Range Melt Pressure and Temperature Transmitter | Electrical Output / Interface | 2-Wire 4–20 mA / Type J Thermocouple / 6-Pin Connector |
| Payment Terms | T/T | Series / Control Platform | ME2 Series / Mercury-Filled Pressure Transmission |
| Delivery Time | 7-14 Days | Model | ME2-6-M-B01C-1-5-D 2130X000X00 / F007762 |
| Model Number | ME2-6-M-B01C-1-5-D 2130X000X00 / F007762 | Place of Origin | USA |
| Brand Name | Gefran |
Gefran ME2-6-M-B01C-1-5-D 2130X000X00, order code F007762, is a 100 bar melt pressure transmitter with an integrated Type J thermocouple. Unlike the shorter code-4 ME2 configuration, this model uses rigid-stem code 5, corresponding to a 318 mm or 12.5 inch rigid section. The longer rigid stem is a defined mechanical configuration and must be matched to the installed machine rather than treated as a minor dimensional variation.
The B01C code specifies a 0–100 bar pressure span, associated with the nominal 1500 psi class. This range can provide better usable resolution on lower-pressure extrusion processes, but the selected span must accommodate startup pressure, cold-material conditions and process transients. It is not suitable merely because the normal running pressure is below 100 bar; validated peak pressure must also be considered.
| Model | ME2-6-M-B01C-1-5-D 2130X000X00 |
| Gefran Material Code | F007762 |
| Pressure Range | 0–100 bar |
| Accuracy Class | M, less than ±0.5% FS |
| Pressure Signal | Two-wire 4–20 mA |
| Supply Requirement | 10–30 VDC |
| Temperature Signal | Type J thermocouple |
| Connector | 6-pin; verify the mating connector and pinout |
| Process Thread | 1/2-20 UNF |
| Rigid Stem | 318 mm / 12.5 inches |
| Flexible Section | 457 mm / 18 inches |
| Maximum Diaphragm Temperature | 400°C |
The extended rigid section changes the sensor’s mechanical reach and the position of the flexible transition. Before replacement, compare the installed insertion geometry, heater arrangement, available clearance and routing path. A shorter code-4 stem may physically fit the same thread but place the flexible section and electronics in a different thermal environment.
Scale the current input from 0 to 100 bar. Connect the thermocouple to a Type J-compatible channel with correct polarity and cold-junction compensation. Keep the thermocouple circuit separate from the powered 4–20 mA loop. Confirm the six-pin diagram because connector appearance alone does not establish identical wiring.
ME2-6-M-B01C-1-4-D 2130X000X00 (F007760) retains the 100 bar range but uses a 153 mm rigid stem. ME2-6-M-B35D-1-5-D 2130X000X00 (F007788) keeps the longer code-5 stem but increases the pressure range to 350 bar. ME2-6-M-B07C-1-5-D 2130X000X00 (F007779) is the corresponding 700 bar long-stem configuration. Related models are provided for family reference only and are not automatically interchangeable.
Provide F007762 together with the full model and a nameplate photograph. Verify the 100 bar span, code-5 rigid length, flexible length, Type J channel, process thread, connector and product condition before ordering.
Company Details
Business Type:
Exporter,Trading Company,Seller
Year Established:
2024
Total Annual:
1000000-1500000
Employee Number:
10~25
Ecer Certification：
Site Member
Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h... Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h...
Get in touch with us
Leave a Message, we will call you back quickly!