Beijing Silk Road Enterprise Management Services Co., Ltd.
| Type | Ceramic Resistor |
| Resistance | 6.8Ω |
| Power(Watts) | 2W |
| Temperature Coefficient | -1300ppm/℃~-500ppm/℃ |
| Tolerance | ±10% |
| Operating Temperature | -40℃~+200℃ |
| Description | Ceramic Resistor 6.8Ω 2W -1300ppm/℃~-500ppm/℃ ±10% Through Hole,D7xL19mm Through Hole Resistors RoHS |
| Mfr. Part # | PCF2CT631R6R8K |
| Package | Through Hole,D7xL19mm |
| Model Number | PCF2CT631R6R8K |
View Detail Information
Explore similar products
Futaba Elec RSS02J4700A520NH fixed resistor with UL94 V0 flameproof coating and
Wirewound Power Resistor BOURNS W5M15R0J with Low Thermal Resistant Ceramic Core
High voltage precision resistor RESI HVLR1905J1M80K9 with low voltage coefficien
Lead Free Metal Film Fixed Resistors UNI ROYAL MFR0W4F1001A50 Series Precise
Product Specification
| Type | Ceramic Resistor | Resistance | 6.8Ω |
| Power(Watts) | 2W | Temperature Coefficient | -1300ppm/℃~-500ppm/℃ |
| Tolerance | ±10% | Operating Temperature | -40℃~+200℃ |
| Description | Ceramic Resistor 6.8Ω 2W -1300ppm/℃~-500ppm/℃ ±10% Through Hole,D7xL19mm Through Hole Resistors RoHS | Mfr. Part # | PCF2CT631R6R8K |
| Package | Through Hole,D7xL19mm | Model Number | PCF2CT631R6R8K |
The PCF series ceramic resistors are designed for anti-pulse surge applications, featuring KOA's original bulk ceramic resistor technology. These non-inductive resistors offer excellent in-pulse and inrush current characteristics, with a flame retardant coating equivalent to UL94V0. They provide higher reliability against disconnection compared to wirewound and film resistors and are AEC-Q200 tested. Products meet EU RoHS requirements.
| Type | Power Rating @ 70C | Resistance Range () | T.C.R. (x10-6/K) | Operating Temp. Range | Rated Ambient Temp. | Max. Working Voltage | Dielectric Withstanding Voltage | Max. Pulse Voltage |
|---|---|---|---|---|---|---|---|---|
| PCF1/2 | 0.5W | 4.7 - 100K | -500 ~ -1300: 3.3R<10 -600 ~ -1500: 10R<100 -700 ~ -1800: 100R<1k -900 ~ -1900: 1kR<100k -900 ~ -2000: 100kR<200k -900 ~ -2200: 200kR390k | -40C to +200C | +70C | 200V | 400V | 10kV: 4.7R<10k 10kV: 10kR<33k 10kV: 33kR<100k 4kV: 10kR<100k |
| PCF1 | 1.0W | 3.3 - 330K | -500~-1300: 3.3R<10 -600~-1500: 10R<100 -700~-1800: 100R<1k -900~-1900: 1kR<100k -900~-2000: 100kR<200k -900~-2200: 200kR390k | -40C to +200C | +70C | 300V | 600V | 14kV: 3.3R<30k 14kV: 30kR<390k 7kV: 30kR<390k |
| PCF2 | 2.0W | 4.7 - 100K | -500~-1300: 3.3R<10 -600~-1500: 10R<100 -700~-1800: 100R<1k -900~-1900: 1kR<100k -900~-2000: 100kR<200k -900~-2200: 200kR390k | -40C to +200C | +70C | 400V | 800V | 20kV: 3.3R<10k 20kV: 10kR<390k 11kV: 10kR<390k |
| Performance Requirements | R (% + 0.05) | Limit Typical | Test Method |
|---|---|---|---|
| Resistance | Within regulated to tolerance | ||
| T.C.R. | +25C/-40C, +25C/+75C and +25C/+125C | ||
| Voltage Coefficient (Apply for over 1k) | 0~-0.2%/V | Rated voltage and rated voltage x 10% | |
| Resistance Measurement voltage | 3.3=| | | |
| Overload | 2% | 0.4% | Rated voltage x 2.5 or maximum overload voltage for 5s, whichever less |
| Resistance to pulse | Refer to the table on the right | SW C=1.000pF 1 sec ON 1 sec OFF Protection resistor DC (Max. pulse voltage) Rx (In insulation oil) Maximum Overload Voltage Maximum Working Voltage | |
| Resistance to soldering heat | 2% | 0.8% | 350C10C, 3.5s0.5s |
| Rapid change of temperature | 2% | 0.4% | -40C (30 min.)/+85C (30 min.), 5 cycles |
| Moisture resistance | 5% | 0.6% | 40C2C, 90%~95%RH, 1000 hours, 1.5h ON/0, 5h OFF cycles |
| Load life | 5% | 0.4% | 70C2C, 1000h, 1.5h ON/0, 5h OFF cycles |
| Resistance to Solvent | No abnormality in appearance. Marking shall be easily legible. | Dipping in IPA or Xylene for 3 minutes and leaving for 10 minutes after removing drops, then brushing 10 times. |
| Type | Dimensions | (max.) | D (nom.) | d (nom.) | C (max.) |
|---|---|---|---|---|---|
| PCF1/2 | inches (mm) | 1.18.118 (30.03.0) | 0.437 (11.1) | .031 (0.8) | .138.02 (3.50.5) |
| PCF1 | inches (mm) | 1.50.118 (38.03.0) | 0.748 (19.0) | .028 (0.7) | .217.039 (5.51.0) |
| PCF2 | inches (mm) | .886 (22.5) | .748 (19.0) | .354.039 (9.01.0) | .276.039 (7.01.0) |
Ordering Information Example: PCF1 C R 103 K
Structure:
Taping Types:
For further information on packaging, please refer to Appendix C.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!