Beijing Silk Road Enterprise Management Services Co., Ltd.
| Number of Resistors | 2 |
| Number of Pins | 4 |
| Tolerance | ±5% |
| Resistance | 0Ω |
| Power(Watts) | 31.25mW |
| Description | 2 ±5% 0Ω 31.25mW 0201x2 Resistor Networks, Arrays RoHS |
| Mfr. Part # | RTA01-2D000JTH |
| Package | 0201x2 |
| Model Number | RTA01-2D000JTH |
View Detail Information
Explore similar products
Thick Film Chip Resistor Network PANASONIC EXB18V101JX Designed for High
Surface mount resistor array Walsin WA06X101JTL with tin plated end terminations
Thick Film Chip Resistor Array PANASONIC EXB38V101JV Suitable for High Density
Compact Chip Resistor Array Walsin WA04X471JTL with Convex Concave Types and
Product Specification
| Number of Resistors | 2 | Number of Pins | 4 |
| Tolerance | ±5% | Resistance | 0Ω |
| Power(Watts) | 31.25mW | Description | 2 ±5% 0Ω 31.25mW 0201x2 Resistor Networks, Arrays RoHS |
| Mfr. Part # | RTA01-2D000JTH | Package | 0201x2 |
| Model Number | RTA01-2D000JTH |
The RTA series resistors are lead-free, halogen-free thick film array chip resistors that comply with RoHS directives. They are designed for general electronic applications.
| Type | Rated Power | Max. Rated Voltage | Max. Overload Voltage | T.C.R (ppm/) | Resistance Range | Number of Terminals | Number of Resistors | JUMPER (0) Rated Current | JUMPER (0) Resistance |
|---|---|---|---|---|---|---|---|---|---|
| RTA02-2D (0402) | 1W | 25V | 50V | 300 (1R<10), 200 (10R10M) | 1R<10, 10R10M | 4 | 2 | 1A | 25m MAX. |
| RTA02-4D (0402) | 1W | 25V | 50V | 300 (1R<10), 200 (10R10M) | 1R<10, 10R10M | 8 | 4 | 1A | 25m MAX. |
| RTA02-8D (0402) | 1W | 25V | 50V | 250 (10R10M) | 10R10M | 16 | 8 | 1A | 50m MAX. |
| RTA03-2D (0603) | 1W | 50V | 100V | 200 (10R10M) | 10R10M | 4 | 2 | 1A | 50m MAX. |
| RTA03-4D (0603) | 1W | 50V | 100V | 200 (22R470K), 200 (1R10M) | 22R470K, 1R10M | 8 | 4 | 1A | 25m MAX |
| RTA02-2C (0402) | 1W | 25V | 50V | 650 (3R10), 200 (10R<1M) | 3R10, 10R1M | 4 | 2 | 1A | 50m MAX. |
| RTA02-4C (0402) | 1W | 25V | 50V | 400 (1R<10), 200 (10R1M) | 1R<10, 10R1M | 8 | 4 | 1A | 50m MAX. |
Operating Temperature Range: -55 ~ 155
Power Derating Curve: Power can be adjusted according to the curve when ambient temperature exceeds 70 to 155.
Rated Voltage/Current Calculation:
| Type | L | W | H | L1 | L2 | P | Q |
|---|---|---|---|---|---|---|---|
| RTA02-2D (0402) | 1.000.10 | 1.000.10 | 0.300.05 | 0.150.10 | 0.250.10 | (0.67) | 0.330.10 |
| RTA02-4D (0402) | 2.000.10 | 1.000.10 | 0.400.10 | 0.200.10 | 0.250.10 | (0.50) | 0.300.10 |
| RTA02-8D (0402) | 4.000.20 | 1.600.10 | 0.400.10 | 0.300.15 | 0.300.10 | (0.50) | 0.250.10 |
| RTA03-2D (0603) | 1.600.15 | 1.600.15 | 0.450.10 | 0.300.15 | 0.300.15 | (0.80) | 0.600.10 |
| RTA03-4D (0603) | 3.200.20 | 1.600.15 | 0.500.10 | 0.300.15 | 0.300.15 | (0.80) | 0.500.10 |
| RTA02-2C (0402) | 1.000.10 | 1.000.10 | 0.300.10 | 0.180.10 | 0.250.10 | (0.50) | 0.300.10 |
| RTA02-4C (0402) | 2.000.10 | 1.000.10 | 0.400.10 | 0.150.10 | 0.250.10 | (0.50) | 0.300.10 |
D(Convex) Type: Ceramic substrate, 2nd Protective coating, Bottom inner electrode, Top inner electrode, Terminal inner electrode, Resistive layer, 1st Protective coating, Marking, Ni plating, Sn plating.
C(Concave) Type: Ceramic substrate, 2nd Protective coating, Bottom inner electrode, Top inner electrode, Terminal inner electrode, Resistive layer, 1st Protective coating, Marking, Ni plating, Sn plating.
| Item | Conditions | Specifications |
|---|---|---|
| Temperature Coefficient of Resistance (TCR) | JIS-C5201-1 4.8 | Refer to Specification Table |
| Short Time Overload | Apply 2.5x rated voltage for 5 sec. Rest 30 min. Measure resistance change. (Refer to Specification Table for rated voltage) JIS-C5201-1 4.13 | 0.5%, 1%: R=1.0%; 5%: R=2.0% |
| Insulation Resistance Test | Apply 100 VDC for 1 min. Measure insulation resistance between electrodes and protective layer/substrate. JIS-C5201-1 4.6 | 109 |
| Dielectric Withstand Voltage | Apply 300 VAC for 1 min. JIS-C5201-1 4.7 | No short circuit or burn |
| Intermittent Overload | 1 sec ON, 25 sec OFF at 2.5x rated voltage in oven. 10,000 cycles. Rest 60 min. Measure resistance change. JIS-C5201-1 4.13 | R=5.0% |
| Item | Conditions | Specifications |
|---|---|---|
| Resistance to Solvent | Immerse in Isopropyl alcohol (20-25) for 50.5 min. Rest 48 hrs. Measure resistance change. JIS-C5201-1 4.29 | R=0.5% |
| Solderability | Pre-treatment: 4 hrs aging at 105, 100% RH, 1.22105 pa. Rest 2 hrs at room temp. Test: Dip in 2355 solder bath for 20.5 sec. Observe solder coverage. JIS-C5201-1 4.17 | Conductor solder coverage >95% |
| Resistance to Soldering Heat | Test 1: Dip in 260+5/-0 solder bath for 10 sec+1/-0. Rest 60 min. Measure resistance change. Test 2: Dip in 260+5/-0 solder bath for 30 sec+1/-0. Clean. Observe solder coverage. JIS-C5201-1 4.18 | Test 1: R%=1.0%. Test 2: Conductor solder coverage >95%. No underlayer visible at electrode edge. |
| Joint Strength of Solder (Flexibility Test) | Solder to flex test board. Apply downward force at center of board (D=5mm). Measure resistance change. JIS-C5201-1 4.33 | R%=1.0% |
| Item | Conditions | Specifications |
|---|---|---|
| Resistance to Dry Heat | 10004 hrs in oven at 1555. Rest 1 hr. Measure resistance change. JIS-C5201-1 4.25 | 0.5%, 1%: R=1.0%; 5%: R=2.0% |
| Thermal Shock | -55 (15 min) to +125 (15 min), 300 cycles. Rest 60 min. Measure resistance change. MIL-STD 202 Method 107 | R=1.0% |
| Moisture Load Test | 402, 90-95% RH. 90 min ON, 30 min OFF at rated voltage. 1,000 hrs. Rest 60 min. Measure resistance change. JIS-C5201-1 4.24 | 0.5%, 1%: R=2.0%; 5%: R=3.0% |
| Load Life | 702 oven. 90 min ON, 30 min OFF at rated voltage. 1,000 hrs. Rest 60 min. Measure resistance change. JIS-C5201-1 4.25 | 0.5%, 1%: R=2.0%; 5%: R=3.0% |
Outer box marked with Electronic Information Product Pollution Control Mark and Packaging Recycling Mark for export to Mainland China.
RALEC and its distributors/agents (collectively "RALEC") assume no liability for errors, inaccuracies, or incompleteness in product information. RALEC may change information without notice. RALEC makes no commitment regarding suitability for special purposes or continued production. To the maximum extent permitted by law, RALEC is not liable for any application/use of its products, lost profits, direct/indirect/special/punitive/consequential/incidental damages, or any implied warranties (fitness for particular purpose, non-infringement, merchantability). This product is defined for general electronic use, not for automotive, medical life-support/sustaining devices, or any application where failure could cause injury/death. Technical advice is provided free of charge; RALEC bears no obligation or liability for its use. Buyer assumes all risks for combining RALEC products with other materials or implementing them in processes. RALEC reserves the right to modify content without notice; product changes will be announced via ECN.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!