| Type | Wirewound Resistor |
| Resistance | 3.3Ω |
| Voltage-Supply(Max) | - |
| Power(Watts) | 1W |
| Temperature Coefficient | ±350ppm/℃ |
| Tolerance | ±5% |
| Description | Wirewound Resistor 3.3Ω 1W ±350ppm/℃ ±5% Through Hole,D5xL12mm Through Hole Resistors RoHS |
| Mfr. Part # | RXF-1W-3.3R-J-T52 |
| Package | Through Hole,D5xL12mm |
| Model Number | RXF-1W-3.3R-J-T52 |
View Detail Information
Explore similar products
Futaba Elec RSS02J4700A520NH fixed resistor with UL94 V0 flameproof coating and
Wirewound Power Resistor BOURNS W5M15R0J with Low Thermal Resistant Ceramic Core
High voltage precision resistor RESI HVLR1905J1M80K9 with low voltage coefficien
Lead Free Metal Film Fixed Resistors UNI ROYAL MFR0W4F1001A50 Series Precise
Product Specification
| Type | Wirewound Resistor | Resistance | 3.3Ω |
| Voltage-Supply(Max) | - | Power(Watts) | 1W |
| Temperature Coefficient | ±350ppm/℃ | Tolerance | ±5% |
| Description | Wirewound Resistor 3.3Ω 1W ±350ppm/℃ ±5% Through Hole,D5xL12mm Through Hole Resistors RoHS | Mfr. Part # | RXF-1W-3.3R-J-T52 |
| Package | Through Hole,D5xL12mm | Model Number | RXF-1W-3.3R-J-T52 |
The RXF series resistors from DONGGUAN HONGDA ELECTRONIC TECHNOLOGY CO.,LTD are designed with excellent surge resistance and good fusing consistency. Their small size facilitates easy installation, ensuring safety and reliability. These resistors are widely used in electronic equipment such as light sources, switching power supplies, chargers, and home appliances. They have obtained several safety certifications, including VDE, UL/CUL, and CQC.
| Model | Rated Power (W) | Dimensions (mm) Dmax. Lmax. H1 | Lead Allowable Length* (mm) | d0.05 |
|---|---|---|---|---|
| RXF 0.25, 0.5S, 1WX | 3.0 | 7.0 | 6070 | 0.380.45 |
| 0.5, 1S, 2WX | 4.0 | 10.0 | 6090 | 0.430.60 |
| 1, 2S, 3WX | 5.0 | 12.0 | 6070 | 0.540.72 |
| 2, 3S | 6.0 | 16.0 | 6080 | 0.600.72 |
| Model | Rated Power (W) | Resistance Range () | Resistance Tolerance (%) | Insulation Voltage (V) (DC or AC Peak) | Component Limit Voltage (V) |
|---|---|---|---|---|---|
| RXF 0.25, 0.5S, 1X | 0.22-300 | 5, 10 | 250 | 200 | |
| 0.5, 1S, 2X | 250 | 350 | |||
| 1, 2S, 3X | 350 | 350 | |||
| 2, 3S | 0.22-47 | 500 | 350 |
| No. | Test Item | Test Method | Performance Requirements |
|---|---|---|---|
| 1 | Resistance | Measured by resistance error sorter. | Resistance value within nominal resistance and allowable tolerance. |
| 2 | Short-time Overload | Apply 2.5 times rated voltage for 5S, recover for 1-2h, measure resistance and calculate change rate. | Resistance Change: R(2%R+0.05) |
| 3 | Solderability | Dip lead ends into solder pot at (2605) for 20.5S, depth 2+0/-0.5mm from body. Observe solder coverage. | Over 90% surface coverage in circumferential direction of dipped part. |
| 4 | Dielectric Strength | Place resistor in metal "V" groove, apply specified insulation voltage between leads and groove for 60S. | No visible damage, clear marking; no breakdown, arcing. |
| 5 | Resistance to Soldering Heat | Dip lead ends into solder pot at (35010) for 3.50.5S, depth 2+0/-0.5mm from body. Recover for 1h, measure resistance and calculate change rate. | Resistance Change: R(1%R+0.05) |
| 6 | Rapid Change of Temperature | Cycle: Low temp (-553) for 30min, ambient for 2-3min, high temp (1553) for 30min, ambient for 2-3min. 5 cycles total. Recover for 1-2h, measure resistance and calculate change rate. | Resistance Change: R(1%R+0.05) |
| 7 | Endurance | Place in constant temperature oven at (703), apply rated DC voltage, 1.5h on, 0.5h off cycle for 1000h. Recover for 1-4h, measure resistance and calculate change rate. | Resistance Change: R(5%R+0.1) |
| 8 | Lead Strength | Tensile: 10N for 10S; Bending: Apply 5N load, tilt body ~90 in 2-3S, then bend in opposite direction (2 bends total). | Resistance Change: R(1%R+0.05) |
| 9 | Vibration | Resistor body 61mm from mounting point. Vibration 10-500Hz, amplitude 0.75mm or acceleration 98m/s (whichever is smaller). Directions Z, X, Y axes for 2h each (total 6h). Cycle: 1min (10-55-10Hz). Measure resistance and calculate change rate after test. | 1) Appearance: No mechanical damage 2) Resistance Change: R(1%R+0.05) |
| 10 | Climatic Sequence | Dry heat - Cyclic damp heat (Test Db, 1st cycle) - Cold - Low pressure - Cyclic damp heat (Test Db, remaining cycles) - DC load. | Resistance Change: R(5%R+0.1) Insulation Resistance: 100M |
| 11 | Accidental Overload | Install sample in single-layer silk screen cylinder (253mm from body). Apply 5, 10, 16 times rated power overload for 5min or until open circuit. | Silk screen cylinder does not ignite. |
| Reel Specification | Dimensions (mm) U | W | P | L1-L2 | T | Z | R | t | T2 |
|---|---|---|---|---|---|---|---|---|---|
| T26 | 381 | 260.5 | 50.5 | 0.5 | 60.1 | 1 | 0 | 3.2 | 1.5 |
| T52 | 642 | 521 | 1 | ||||||
| T63 | 752 | 631 | 1.2 | 752 | 631 | 100.5 | |||
| T72 | 842 | 722 | 50.5 | 1.2 | 842 | 722 | 100.5 |
| Shape | Dimensions (mm) H1 | H11.5 | H21.5 | hh (15%) | h12 | h22 |
|---|---|---|---|---|---|---|
| TA Type | 70 | 20 | 20 | 50 | 10 | 10 |
| TB Type | 80 | 5 | 25 | 40 | 10 | 30 |
| Shape | Dimensions (mm) P1.0 | H1 | h0.5 |
|---|---|---|---|
| n Type | 5 | 3.5 | 8 |
| B Type | 5 | 3.5 | 8 |
| L Type | 12.5 | 4.5 | 14.5 |
RXF 1W S 10 J
| Color | 1st Digit | 2nd Digit | 3rd Digit | Multiplier | Tolerance |
|---|---|---|---|---|---|
| Black | 0 | 0 | 0 | 10 | |
| Brown | 1 | 1 | 1 | 10 | 1% |
| Red | 2 | 2 | 2 | 10 | 2% |
| Orange | 3 | 3 | 3 | 10 | |
| Yellow | 4 | 4 | 4 | 10 | |
| Green | 5 | 5 | 5 | 10 | 0.5% |
| Blue | 6 | 6 | 6 | 10 | 0.25% |
| Violet | 7 | 7 | 7 | 10 | 0.1% |
| Gray | 8 | 8 | 8 | 10 | |
| White | 9 | 9 | 9 | 10 | |
| Gold | 10 | 5% | |||
| Silver | 10 | 10% | |||
| Plain | 20% |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification:
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!