Beijing Silk Road Enterprise Management Services Co., Ltd.
| Type | Wirewound Resistor |
| Resistance | 10Ω |
| Voltage-Supply(Max) | - |
| Power(Watts) | 500mW |
| Temperature Coefficient | ±350ppm/℃ |
| Tolerance | ±5% |
| Description | Wirewound Resistor 10Ω 500mW ±350ppm/℃ ±5% Through Hole,D4xL10mm Through Hole Resistors RoHS |
| Mfr. Part # | RXF-1/2W-10R-J-T52 |
| Package | Through Hole,D4xL10mm |
| Model Number | RXF-1/2W-10R-J-T52 |
View Detail Information
Explore similar products
Futaba Elec RSS02J4700A520NH fixed resistor with UL94 V0 flameproof coating and
Wirewound Power Resistor BOURNS W5M15R0J with Low Thermal Resistant Ceramic Core
High voltage precision resistor RESI HVLR1905J1M80K9 with low voltage coefficien
Lead Free Metal Film Fixed Resistors UNI ROYAL MFR0W4F1001A50 Series Precise
Product Specification
| Type | Wirewound Resistor | Resistance | 10Ω |
| Voltage-Supply(Max) | - | Power(Watts) | 500mW |
| Temperature Coefficient | ±350ppm/℃ | Tolerance | ±5% |
| Description | Wirewound Resistor 10Ω 500mW ±350ppm/℃ ±5% Through Hole,D4xL10mm Through Hole Resistors RoHS | Mfr. Part # | RXF-1/2W-10R-J-T52 |
| Package | Through Hole,D4xL10mm | Model Number | RXF-1/2W-10R-J-T52 |
The RXF Series Fuse Resistors from Dongguan Hongda Electronic Technology Co., Ltd. are designed with excellent surge resistance and good fusing consistency. Their compact size facilitates easy installation, ensuring safety and reliability. These resistors are widely used in electronic equipment such as light sources, switching power supplies, chargers, and home appliances.
| Model | Rated Power (W) | Dimensions (mm) | Lead Allowable Length* (mm) | Dmax. | Lmax. | H1 | d0.05 |
|---|---|---|---|---|---|---|---|
| RXF 0.25, 0.5S, 1WX | 3.0 | 7.0 | 6070 | 0.380.45 | 1 | ||
| 0.5, 1S, 2WX | 4.0 | 10.0 | 6090 | 0.430.60 | 1.5 | ||
| 1, 2S, 3WX | 5.0 | 12.0 | 6070 | 0.540.72 | |||
| 2, 3S | 6.0 | 16.0 | 6080 | 0.600.72 |
| Model | Rated Power (W) | Resistance Range () | Resistance Tolerance (%) | Insulation Voltage (V) (DC or AC peak) | Component Limit Voltage (V) |
|---|---|---|---|---|---|
| RXF 0.25, 0.5S, 1X | 0.22-300 | 5, 10 | 250 | 200 | |
| 0.5, 1S, 2X | 250 | 350 | |||
| 1, 2S, 3X | 350 | 350 | |||
| 2, 3S | 0.22-47 | 500 | 350 |
| No. | Test Item | Test Method | Performance Requirement |
|---|---|---|---|
| 1 | Resistance | Measured by resistance error sorter. | Resistance value within nominal resistance and allowable tolerance. |
| 2 | Short-time Overload | Apply 2.5 times rated voltage for 5S, recover for 1-2h, measure resistance, calculate resistance change rate. | Resistance Change: R(2%R+0.05) |
| 3 | Solderability | Dip leads into solder pot at (2605) for 20.5S, depth 2+0/-0.5mm from body. Observe solder coverage. | Over 90% surface coverage in the circumferential direction of the dipped part. |
| 4 | Withstand Voltage | Place resistor in metal "V" groove, apply specified insulation voltage between leads and groove for 60S. | No visible damage, clear marking; no breakdown or arcing. |
| 5 | Withstand Soldering Heat | Measure resistance before test. Dip leads into solder pot at (35010) for 3.50.5S, depth 2+0/-0.5mm from body. Recover for 1h, measure resistance, calculate change rate. | Resistance Change: R(1%R+0.05) |
| 6 | Rapid Temperature Change | Cycle: Low temp (-553) (30min), room temp (2-3min), high temp (1553) (30min), room temp (2-3min). Repeat 5 cycles. Recover 1-2h, measure resistance, calculate change rate. | Resistance Change: R(1%R+0.05) |
| 7 | Durability | Place in constant temperature oven at (703). Apply rated DC voltage, 1.5h ON, 0.5h OFF cycle for 1000h. Recover 1-4h, measure resistance, calculate change rate. | Resistance Change: R(5%R+0.1) |
| 8 | Lead Strength | Tensile: 10N for 10S. Bending: Apply 5N load, tilt body ~90 for 2-3S, recover, bend 90 in opposite direction (2 bends total). | Resistance Change: R(1%R+0.05) |
| 9 | Vibration | Resistor body to mounting point distance 61mm. Frequency range 10-500Hz, amplitude 0.75mm or acceleration 98m/s (whichever is smaller). Vibration along Z, X, Y axes for 2h each, total 6h. Cycle: 1min (10-55-10Hz). Measure resistance after test, calculate change rate. | 1) Appearance: No mechanical damage. 2) Resistance Change: R(1%R+0.05) |
| 10 | Climatic Sequence | Dry heat - Cyclic damp heat (Test Db, 1st cycle) - Cold - Low pressure - Cyclic damp heat (Test Db, remaining cycles) - DC load. | Resistance Change: R(5%R+0.1) Insulation Resistance: 100M |
| 11 | Accidental Overload | Install sample in single-layer wire mesh cylinder 253mm from resistor body. Apply 5, 10, 16 times rated power overload for 5min or until open circuit. | Wire mesh cylinder does not ignite. |
| Taping Specification | Dimensions (mm) | U | W | P | L1-L2 | T | Z | R | t | T26 |
|---|---|---|---|---|---|---|---|---|---|---|
| T26 | 381 | 260.5 | 50.5 | 0.5 | 60.1 | 1 | 0 | 3.2 | 1.5 | |
| T52 | 642 | 521 | 1 | |||||||
| T63 | 752 | 631 | 1.2 | 752 | 631 | 100.5 | ||||
| T72 | 842 | 722 | 50.5 | 1.2 | 842 | 722 | 100.5 |
| Shape | Dimensions (mm) | H1 | H11.5 | H21.5 | hh (15%) | h12 | h22 |
|---|---|---|---|---|---|---|---|
| TA Type | 70 | 20 | 20 | 50 | 10 | 10 | |
| TB Type | 80 | 5 | 25 | 40 | 10 | 30 |
Note: Exposed lead length 5mm has tolerance of +2/-1 mm. Sleeve dimensions can be customized.
| Shape | Dimensions (mm) | P1.0 | H1 | h0.5 |
|---|---|---|---|---|
| n Type | 5 | 3.5 | 8 | 3.5 |
| B Type | 5 | 3.5 | 8 | 3.5 |
| L Type | 12.5 | 4.5 | 14.5 | 5.5 |
Note: Molded shape and dimensions can be customized.
RXF 1W S 10 J
| Component | Description | Options |
|---|---|---|
| RXF | Series Name | |
| Rated Power | 0.25w, 0.5w, 1w, 2w, 3w | |
| S / X | Type | S: Miniaturized, X: Ultra-miniaturized |
| Resistance Value | Nominal Resistance | E24 Series (See diagram below) |
| Tolerance | Allowable Resistance Error | J: 5%, K: 10%, M: 20% |
| Color | 1st Digit | 2nd Digit | 3rd Digit | Multiplier | Tolerance |
|---|---|---|---|---|---|
| Black | 0 | 0 | 0 | 10 | |
| Brown | 1 | 1 | 1 | 10 | 1% |
| Red | 2 | 2 | 2 | 10 | 2% |
| Orange | 3 | 3 | 3 | 10 | |
| Yellow | 4 | 4 | 4 | 10 | |
| Green | 5 | 5 | 5 | 10 | 0.5% |
| Blue | 6 | 6 | 6 | 10 | 0.25% |
| Violet | 7 | 7 | 7 | 10 | 0.1% |
| Gray | 8 | 8 | 8 | 10 | |
| White | 9 | 9 | 9 | 10 | |
| Gold | 10 | 5% | |||
| Silver | 10 | 10% | |||
| Plain | 20% |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!