| Type | Metal Film Resistor |
| Resistance | 150kΩ |
| Voltage-Supply(Max) | 500V |
| Power(Watts) | 3W |
| Temperature Coefficient | ±100ppm/℃ |
| Tolerance | ±1% |
| Operating Temperature | -55℃~+155℃ |
| Description | Metal Film Resistor 150kΩ 3W ±100ppm/℃ ±1% Through Hole,D5xL15.5mm Through Hole Resistors RoHS |
| Mfr. Part # | MF3WS-150KΩ±1% T |
| Package | Through Hole,D5xL15.5mm |
| Model Number | MF3WS-150KΩ±1% T |
View Detail Information
Explore similar products
Futaba Elec RSS02J4700A520NH fixed resistor with UL94 V0 flameproof coating and
Wirewound Power Resistor BOURNS W5M15R0J with Low Thermal Resistant Ceramic Core
High voltage precision resistor RESI HVLR1905J1M80K9 with low voltage coefficien
Lead Free Metal Film Fixed Resistors UNI ROYAL MFR0W4F1001A50 Series Precise
Product Specification
| Type | Metal Film Resistor | Resistance | 150kΩ |
| Voltage-Supply(Max) | 500V | Power(Watts) | 3W |
| Temperature Coefficient | ±100ppm/℃ | Tolerance | ±1% |
| Operating Temperature | -55℃~+155℃ | Description | Metal Film Resistor 150kΩ 3W ±100ppm/℃ ±1% Through Hole,D5xL15.5mm Through Hole Resistors RoHS |
| Mfr. Part # | MF3WS-150KΩ±1% T | Package | Through Hole,D5xL15.5mm |
| Model Number | MF3WS-150KΩ±1% T |
This specification is for Metal Film Fixed Resistors manufactured by CHIAN CHIA ELECTRONIC(HU BEI)CO.,LTD, compliant with RoHS environmental substance requirements. The resistors are characterized by their type designation, rated power, nominal resistance value, tolerance, and form.
| Type | Rated Power | Resistance Range () | Tolerance | Max. Working Voltage (V) | Max. Overload Voltage (V) | Dielectric Withstanding Voltage (V) | Operating Temperature Range () |
| MF1/8W | 0.125W | 1 ~1M | J (5%), G (2%), F (1%), D (0.5%) | 150 | 300 | 300 | -55+155 |
| MF1/4WS | 0.25W | 1 ~10M | J (5%), G (2%), F (1%), D (0.5%) | 150 | 300 | 300 | -55+155 |
| MF1/4W | 0.25W | 1 ~10M | J (5%), G (2%), F (1%), D (0.5%) | 250 | 500 | 350 | -55+155 |
| MF1/2WS | 0.5W | 1 ~10M | J (5%), G (2%), F (1%), D (0.5%) | 250 | 700 | 350 | -55+155 |
| MF1/2W | 0.5W | 1 ~10M | J (5%), G (2%), F (1%), D (0.5%) | 300 | 700 | 400 | -55+155 |
| MF1WS | 1W | 1 ~10M | J (5%), G (2%), F (1%), D (0.5%) | 300 | 800 | 400 | -55+155 |
| MF1W | 1W | 1 ~10M | J (5%), G (2%), F (1%), D (0.5%) | 350 | 800 | 450 | -55+155 |
| MF2WS | 2W | 1 ~10M | J (5%), G (2%), F (1%), D (0.5%) | 350 | 800 | 450 | -55+155 |
| MF2W | 2W | 1 ~10M | J (5%), G (2%), F (1%), D (0.5%) | 500 | 800 | 450 | -55+155 |
| MF3WS | 3W | 1 ~10M | J (5%), G (2%), F (1%), D (0.5%) | 500 | 1000 | 450 | -55+155 |
| MF3W | 3W | 1 ~10M | J (5%), G (2%), F (1%), D (0.5%) | 500 | 800 | 500 | -55+155 |
| MF5WS | 5W | 1 ~10M | J (5%), G (2%), F (1%), D (0.5%) | 500 | 1000 | 500 | -55+155 |
| MF5W | 5W | 1 ~10M | J (5%), G (2%), F (1%), D (0.5%) | 500 | 1000 | 500 | -55+155 |
| Item | Performance Specification | Test Method (Conform to JIS C 5202) |
| Temperature Coefficient | Within 100PPM/ | 5.2 |
| Short Time Overload | Within (0.5%+0.05). No evidence of mechanical damage. | 5.5 (Rated voltage 2.5 times, 5s. But not to exceed maximum overload voltage) |
| Insulation Resistance | 104M or more. | 5.6 (V-block method, DC 500V for 60 seconds) |
| Dielectric Withstanding Voltage | No evidence of flashover, arcing or insulation breakdown. | 5.7 (Constant pressure, V-block method, AC potential respectively for 60 seconds. See Table-1) |
| Terminal Strength | No evidence of mechanical damage. | 6.1 (Tensile strength and Torsion strength specified) |
| Resistance to Soldering Heat | Within (0.5%+0.05). No evidence of mechanical damage. | 6.4 (35010, 31.0s, leave for 0.5h after test) |
| Solderability | Covered with new solder by 95% at least. | 6.5 (Solder temperature: 2555. Dipping time: 31.0s) |
| Resistance to Solvent | No deterioration of protective coating and markings. | 6.9 (Immersed in isoproalcohol for 3 minutes with ultrasonic) |
| Temperature Cycle | Within (1%+0.05). No evidence of mechanical damage. | 7.4 (5 cycles: -55/30min, Room temp. 10-15min; +80/30min, Room temp. 10-15min) |
| Load Life in Humidity | Within (2%+0.05). | 7.9 (402, 90-95%RH, 1000h, Rated voltage (90 min ON, 30 min OFF)) |
| Load Life | Within (2%+0.05). | 7.10 (703, 1000h, Rated voltage (90 min ON, 30 min OFF)) |
| Color | 1st Figure | 2nd Figure | 3rd Figure | Multiplier | Tolerance |
| Black | 0 | 0 | 0 | 100 | |
| Brown | 1 | 1 | 1 | 101 | 1% (F) |
| Red | 2 | 2 | 2 | 102 | 2% (G) |
| Orange | 3 | 3 | 3 | 103 | |
| Yellow | 4 | 4 | 4 | 104 | |
| Green | 5 | 5 | 5 | 105 | |
| Blue | 6 | 6 | 6 | 106 | |
| Violet | 7 | 7 | 7 | 107 | |
| Gray | 8 | 8 | 8 | ||
| White | 9 | 9 | 9 | ||
| Gold | 10-1 | 5% (J) | |||
| Silver | 10-2 | ||||
| Plain | 0.1%, 0.25%, 0.5%, 1% (5-Band code) |
| Type | Dimensions (Unit: mm) | ||||
| I 2.0 | L 1.0 | D | d 0.05 | H 2.0 | |
| MF1/8W, MF1/4WS | 60 | 3.2 | 1.80.5 | 0.40 | 27 |
| MF1/4W, MF1/2WS | 60 | 6.5 | 2.30.5 | 0.43 | 26 |
| MF1/2W, MF1WS | 60 | 9.0 | 3.20.5 | 0.50 | 26 |
| MF1W, MF2WS | 60 | 11.5 | 4.51.0 | 0.68 | 25 |
| MF2W | 73 | 11.5 | 4.51.0 | 0.68 | 31 |
| MF3W, MF3WS | 60 | 15.5 | 5.01.0 | 0.68 | 23 |
| MF3W | 81 | 15.5 | 5.01.0 | 0.68 | 33 |
| MF5W, MF5WS | 94 | 17.5 | 6.01.0 | 0.68 | 38 |
| MF5W | 94 | 24.5 | 8.01.0 | 0.68 | 35 |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification:
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!