Beijing Silk Road Enterprise Management Services Co., Ltd.
| Type | Wirewound Resistor |
| Resistance | 2.2Ω |
| Voltage-Supply(Max) | - |
| Power(Watts) | 2W |
| Temperature Coefficient | ±350ppm/℃ |
| Tolerance | ±5% |
| Description | Wirewound Resistor 2.2Ω 2W ±350ppm/℃ ±5% Through Hole,D6xL16mm Through Hole Resistors RoHS |
| Mfr. Part # | RXF-2W-2.2R-J-T52 |
| Package | Through Hole,D6xL16mm |
| Model Number | RXF-2W-2.2R-J-T52 |
View Detail Information
Explore similar products
Futaba Elec RSS02J4700A520NH fixed resistor with UL94 V0 flameproof coating and
Wirewound Power Resistor BOURNS W5M15R0J with Low Thermal Resistant Ceramic Core
High voltage precision resistor RESI HVLR1905J1M80K9 with low voltage coefficien
Lead Free Metal Film Fixed Resistors UNI ROYAL MFR0W4F1001A50 Series Precise
Product Specification
| Type | Wirewound Resistor | Resistance | 2.2Ω |
| Voltage-Supply(Max) | - | Power(Watts) | 2W |
| Temperature Coefficient | ±350ppm/℃ | Tolerance | ±5% |
| Description | Wirewound Resistor 2.2Ω 2W ±350ppm/℃ ±5% Through Hole,D6xL16mm Through Hole Resistors RoHS | Mfr. Part # | RXF-2W-2.2R-J-T52 |
| Package | Through Hole,D6xL16mm | Model Number | RXF-2W-2.2R-J-T52 |
The RXF series from DONGGUAN HONGDA ELECTRONIC TECHNOLOGY CO.,LTD are high-performance resistors designed for electronic equipment. They offer excellent surge resistance, good fusing consistency, and a compact size for easy installation, ensuring safety and reliability. These resistors are widely used in electronic devices such as light sources, switching power supplies, chargers, and home appliances. Key certifications include VDE, UL/CUL, and CQC.
| Model | Rated Power (W) | Dimensions (mm) Dmax. | Dimensions (mm) Lmax. | Lead Allowable Length* (mm) | Dimensions (mm) H1 | Dimensions (mm) d0.05 |
|---|---|---|---|---|---|---|
| RXF 0.25, 0.5S, 1WX | 3.0 | 7.0 | 6070 | 0.380.45 | 1 | |
| 0.5, 1S, 2WX | 4.0 | 10.0 | 6090 | 0.430.60 | 1.5 | |
| 1, 2S, 3WX | 5.0 | 12.0 | 6070 | 0.540.72 | ||
| 2, 3S | 6.0 | 16.0 | 6080 | 0.600.72 |
| Model | Rated Power (W) | Resistance Range () | Resistance Tolerance (%) | Insulation Voltage (V) (DC or AC Peak) | Component Limit Voltage (V) |
|---|---|---|---|---|---|
| RXF 0.25, 0.5S, 1X | 0.22-300 | 5, 10 | 250 | 200 | |
| 0.5, 1S, 2X | 250 | 350 | |||
| 1, 2S, 3X | 350 | 350 | |||
| 2, 3S | 0.22-47 | 500 | 350 |
| No. | Test Item | Test Method | Performance Requirements |
|---|---|---|---|
| 1 | Resistance | Measured by resistance error sorter. | Resistance value within nominal resistance and allowable tolerance range. |
| 2 | Short-time Overload | Apply 2.5 times rated voltage for 5S, recover for 1-2h, measure resistance, calculate resistance change rate. | Resistance Change: R(2%R+0.05) |
| 3 | Solderability | Dip lead into solder pot (2605) for 20.5S at a depth of 2+0/-0.5mm from the body. Observe solder coverage. | Above 90% circumferential coverage on the immersed part. |
| 4 | Dielectric Strength | Place resistor in metal "V" groove, apply specified insulation voltage between leads and groove for 60S. | No visible damage, clear marking; no breakdown, arcing. |
| 5 | Resistance to Soldering Heat | Measure resistance before test. Dip lead into solder pot (35010) for 3.50.5S at a depth of 2+0/-0.5mm from the body. Recover for 1h, measure resistance, calculate change rate. | Resistance Change: R(1%R+0.05) |
| 6 | Rapid Temperature Change | Cycle: Low temp (-553) for 30 min, room temp 2-3 min, high temp (1553) for 30 min, room temp 2-3 min. Repeat 5 cycles. Recover 1-2h, measure resistance, calculate change rate. | Resistance Change: R(1%R+0.05) |
| 7 | Endurance | Place resistor in constant temperature oven (703). Apply rated DC voltage, 1.5h on, 0.5h off, cycle for 1000h. Recover 1-4h, measure resistance, calculate change rate. | Resistance Change: R(5%R+0.1) |
| 8 | Lead Strength | Tensile: 10N for 10S. Bending: Apply 5N load, tilt body approx. 90 in 2-3S, recover, bend in opposite direction (2 bends total). | Resistance Change: R(1%R+0.05) |
| 9 | Vibration | Resistor body 61mm from mounting point. Vibration frequency 10-500Hz, amplitude 0.75mm or acceleration 98m/s (whichever is smaller). Directions Z, X, Y axes for 2h each, total 6h. Cycle 1min (10-55-10Hz). Measure resistance, calculate change rate. | 1) Appearance: No mechanical damage. 2) Resistance Change: R(1%R+0.05) |
| 10 | Climatic Sequence | Dry heat, cyclic damp heat (test Db, 1st cycle), cold, low pressure, cyclic damp heat (test Db, remaining cycles), DC load. | Resistance Change: R(5%R+0.1) Insulation Resistance: 100M |
| 11 | Accidental Overload | Install sample in single-layer wire mesh cylinder 253mm from body. Apply 5, 10, 16 times rated power overload for 5min or until open circuit. | Wire mesh cylinder does not ignite. |
| Taping Specification | Dimensions (mm) U | Dimensions (mm) W | Dimensions (mm) P | Dimensions (mm) L1-L2 | Dimensions (mm) T | Dimensions (mm) Z | Dimensions (mm) R | Dimensions (mm) t | Dimensions (mm) T2 |
|---|---|---|---|---|---|---|---|---|---|
| T26 | 381 | 260.5 | 50.5 | 0.5 | 60.1 | 1 | 0 | 3.2 | 1.5 |
| T52 | 642 | 521 | 1 | ||||||
| T63 | 752 | 631 | 1.2 | 752 | 631 | 100.5 | |||
| T72 | 842 | 722 | 50.5 | 1.2 | 842 | 722 | 100.5 |
| Shape | Dimensions (mm) H1 | Dimensions (mm) H11.5 | Dimensions (mm) H21.5 | h | Dimensions (mm) h (15%) | Dimensions (mm) h12 | Dimensions (mm) h22 |
|---|---|---|---|---|---|---|---|
| TA Type | 70 | 20 | 20 | 50 | 10 | 10 | |
| TB Type | 80 | 5 | 25 | 40 | 10 | 30 |
Note: Exposed lead length 5mm, tolerance is +2/-1 mm. Sleeve dimensions can be customized.
| Shape | Dimensions (mm) P1.0 | Dimensions (mm) H1 | Dimensions (mm) h0.5 |
|---|---|---|---|
| n Type | 5 | 3.5 | 8 |
| B Type | 5 | 3.5 | 8 |
| L Type | 12.5 | 4.5 | 14.5 |
Note: Molded shape and dimensions can be customized.
RXF 1W S 10 J
| Category | Description |
|---|---|
| Rated Power | 0.25w, 0.5w, 1w, 2w, 3w |
| Resistance Tolerance | J 5%, K 10%, M 20% |
| Nominal Resistance | E24 Series (See color code diagram) |
| Model | RXF |
| Wire Winding | S: Miniaturized, X: Ultra-miniaturized |
| Color Code | (See diagram for First digit, Second digit, Third digit, Multiplier, Tolerance) |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!