Beijing Silk Road Enterprise Management Services Co., Ltd.
| Voltage Rating | 16V |
| Capacitance | 270uF |
| Lifetime | - |
| Tolerance | ±20% |
| Pin Spacing | - |
| Equivalent Series Resistance(ESR) | - |
| Height - Seated (Max) | - |
| Ripple Current | - |
| Diameter | - |
| Description | 16V 270uF ±20% Through Hole,6.3x9mm Aluminum - Polymer Capacitors RoHS |
| Mfr. Part # | SVF1CM271E09E00RERFM |
| Package | Through Hole,6.3x9mm |
| Model Number | SVF1CM271E09E00RERFM |
View Detail Information
Explore similar products
Industrial ChengTao TD1A337M0608 Component Offering Long Term Performance and
Solid Electrolyte Aluminum Electrolytic Capacitor HYNCDZ E2471M016C120HY for
conductive polymer hybrid capacitors Lelon HBR331M1EBK-1010 with high ripple
Surface Mount Conductive Polymer Capacitors NCC APXE160ARA331MJA0G with RoHS2
Product Specification
| Voltage Rating | 16V | Capacitance | 270uF |
| Lifetime | - | Tolerance | ±20% |
| Pin Spacing | - | Equivalent Series Resistance(ESR) | - |
| Height - Seated (Max) | - | Ripple Current | - |
| Diameter | - | Description | 16V 270uF ±20% Through Hole,6.3x9mm Aluminum - Polymer Capacitors RoHS |
| Mfr. Part # | SVF1CM271E09E00RERFM | Package | Through Hole,6.3x9mm |
| Model Number | SVF1CM271E09E00RERFM |
The Aishi VF series Aluminum Solid Electrolytic Capacitors utilize conductive polymer electrolyte for enhanced performance. These capacitors are designed for stable operation within a specified ambient temperature range at rated voltage. They are suitable for various industrial applications where reliable performance and specific electrical characteristics are required.
| AISHI P/N | Rated Work Voltage (V.DC) | Nominal Capacitance 120Hz, 20 (F) | Capacitance Tolerance (%) | Operating Temp () | Nominal Case Size D*L (mm) | ESR 100KHz, 20 (mmax) | Max Leakage Current 20 (A max) | DF 120Hz, 20 (%max) | Ripple Current 100KHz, 105 (mA.rms) | Load Life (Hours) |
|---|---|---|---|---|---|---|---|---|---|---|
| SVF1CM271E09E00RERFM | 16 | 270 | -20+20 | 105 | 6.3*9 | 15 | 864 | 12 | 4800 | 5000 |
| Item | Test Method | Performance |
|---|---|---|
| Rated voltage | - | DC: 2.5V100V |
| Capacitance | Measuring frequency: 120Hz; Measuring circuit: Series equivalent circuit; Measuring voltage: 0.5Vrms or less; DC bias voltage: +1.5~2.0VDC | Refer to characteristic table |
| Dissipation Factor | - | Refer to characteristic table |
| ESR | Measuring frequency: 100kHz; Measuring temperature: 20 2; Measuring point: 2mm max from the surface of a sealing resin on the lead wire | Refer to characteristic table |
| Leakage current | DC leakage current shall be measured after 2 minutes application of the DC rated working voltage through the 1000 resistor at 20 | Refer to characteristic table |
| Item | Test Method | Performance |
|---|---|---|
| Operating Temperature Range | - | -55105 (2.5V100V) |
| High & Low Temperature Impedance | Impedance at 100kHz at -553 or 1052 | Z (-55) / Z (+20) 1.25; Z (105) / Z (+20) 1.25 |
| Characteristics at High Temperature & Low Temperature | - | Capacitance, tan, |Z| at 20; Capacitance, |Z| at -55; |Z|, LC at 105; Capacitance, tan at 20. Capacitance change within 10% of step 1; |Z| ratio < 1.25; Leakage current 150% of the larger values between 0.2CV and 500uA; Capacitance change within 5% of step 1; tan within specified value. |
| Surge Voltage | Rated surge voltage applied for 30s, discharge for 330s, repeated for 1000 cycles (6 min/cycle) at 15-35 | Leakage current the larger values between 0.2CV and 500uA; Capacitance change Within20% of initial value; tan150% of initial value; ESR150% of initial specified value. |
| Resistance to Vibration | JIS C 5102 8.2 and JIS C 5025; 10 to 55Hz (1 min interval/105510Hz), 0.75mm amplitude, 3 axes (X, Y, Z), 2 hours/axial (Total 6 hours) | Capacitance change within 5% compared to initial value; Lead wire not broken. |
| Solderability | 235 5 C for 2 0.5 seconds; Flux: Rosin (JIS K5902)//Ethanol(JIS K8101); About 25 wt.% | At least 95% of surface area of the dipped portion of the terminal shall be covered with new solder. |
| Resistance to soldering heat | Vapor phase soldering: 260 5 C for 10 1 seconds; Soldering iron: 400 10 C for 3+1/-0 seconds | Capacitance change: Within 5% of initial capacitance; tan130% of initial specified value; ESR 130% of initial specified value; Leakage current the larger values between 0.2CV and 500uA. |
| Resistance to damp heat (steady state) | 602, 90% ~ 95% RH, 1000 (-0/+48) hrs, without load | Capacitance change within 20% of initial value; tan 150% of initial specified value; ESR 150% of initial specified value; Leakage current the larger values between 0.2CV and 500uA. |
| Rapid change of temperature | 10 Cycles (Refer to Fig. 1) | Capacitance change : Within 10% of the initial capacitance; tan initial specified value; Leakage current the larger values between 0.2CV and 500uA. |
| Load Life Test | 5000 hours continuous application of DC rated working voltage at 105 2, measurements after 2 hours at room temperature | Capacitance change within 20% of initial value; tan 150% of initial specified value; ESR 150% of initial specified value; Leakage current the larger values between 0.2CV and 500uA; Appearance: No significant damage. |
| Size Code | D (mm) | D Tolerance | L' (mm) | L' Tolerance | A0.2 (mm) | B0.2 (mm) | C0.2 (mm) | P0.2 (mm) | W (mm) |
|---|---|---|---|---|---|---|---|---|---|
| E09 | 6.3 | -0.1+0.5 | 9 | -0.3+0.3 | 6.6 | 6.6 | 7.2 | 1.9 | 0.650.15 |
Year Code: 01 (for 2020), Week Code: F, Series: VF, Rated Capacitance: 270UF, Rated Voltage: 16WV. Marking ink color is red.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!