Beijing Silk Road Enterprise Management Services Co., Ltd.
| Voltage Rating | 10V |
| Capacitance | 470uF |
| Lifetime | - |
| Tolerance | ±20% |
| Pin Spacing | - |
| Equivalent Series Resistance(ESR) | - |
| Height - Seated (Max) | 8mm |
| Operating Temperature | -55℃~+105℃ |
| Ripple Current | - |
| Diameter | 6.3mm |
| Description | 470uF ±20% 10V Aluminum - Polymer Capacitors Through Hole,D6.3xL8mm |
| Mfr. Part # | PCR1AEL471MF08LL25WP |
| Package | Through Hole,D6.3xL8mm |
| Model Number | PCR1AEL471MF08LL25WP |
View Detail Information
Explore similar products
Industrial ChengTao TD1A337M0608 Component Offering Long Term Performance and
Solid Electrolyte Aluminum Electrolytic Capacitor HYNCDZ E2471M016C120HY for
conductive polymer hybrid capacitors Lelon HBR331M1EBK-1010 with high ripple
Surface Mount Conductive Polymer Capacitors NCC APXE160ARA331MJA0G with RoHS2
Product Specification
| Voltage Rating | 10V | Capacitance | 470uF |
| Lifetime | - | Tolerance | ±20% |
| Pin Spacing | - | Equivalent Series Resistance(ESR) | - |
| Height - Seated (Max) | 8mm | Operating Temperature | -55℃~+105℃ |
| Ripple Current | - | Diameter | 6.3mm |
| Description | 470uF ±20% 10V Aluminum - Polymer Capacitors Through Hole,D6.3xL8mm | Mfr. Part # | PCR1AEL471MF08LL25WP |
| Package | Through Hole,D6.3xL8mm | Model Number | PCR1AEL471MF08LL25WP |
The HEL Series by Nantong Jianghai Capacitor Co., Ltd. features conductive polymer solid aluminum electrolytic capacitors. Designed for reliability and performance, these capacitors are suitable for a wide range of electronic applications.
| Item | Specification | Test Method |
| Rated voltage | 2.5~16 V | |
| Rated capacitance | 100~1200 F (20,120Hz) | |
| Tolerance on rated capacitance | 20 % | |
| Surge voltage | UR 1.15 | |
| Leakage current | See specifications list (20, After 2 minutes) | Series resistor: 1,000 Applied rated voltage 2 minutes. If this value is doubtful, performed the voltage treatment. Voltage treatment: The capacitor should be serially attached to a protective 1,000 resistor and d.c. voltage equivalent to the rated voltage should be applied for 2h at 105 2. Next, after letting the capacitor cool to room temperature, it should be discharged through a resistor of approximately 1 /V and then stored at standard atmospheric conditions for 12 h to 24 h. |
| Tangent of loss angle (tan) | See specifications list (20,120Hz) | Measuring temperature: 202 |
| Equivalent Series Resistance (ESR) | See specifications list (100 kHz) | Frequency: 100 kHz10% Measuring voltage: 0.5Vrms, Measuring temperature: 202 |
| Rated ripple current | See specifications list (105, 100 kHz) | |
| Category temperature range | -55 to 105 | |
| Lifespan | 105 , 2000 h | |
| Solderability | At least 95% of circumferential surface of the dipped portion of termination shall be covered with new solder. Flux: Rosin // Ethanol, About 25 wt% Sn-Ag-Cu solder. Temperature: 2453, Duration: 20.3 seconds | Solder bath method |
| Robustness of terminations (Tensile) | See table | With the body of a capacitor fixed, the load shall be applied to the lead wire termination in its draw out direction, gradually up to the specified value. |
| Robustness of terminations (Bending) | See table | Suspend a weight corresponding to bending strength, bend the body through 90and return it to the original position. Carry out these operations during 2 to 3 seconds and count it as one cycle. Carry out similar operations in the opposite direction and count it as two cycles. |
| Resistance to soldering heat (Capacitance change) | Within 5% of the initial value | A) Solder bath method Temperature: 2605C, Duration: 10 1 seconds B) Soldering iron method Temperature: 40010C Duration: 3+1/0 seconds Heat protector: t=1.6 mm glass-epoxy board. |
| Resistance to soldering heat (tan) | Within the value of item 2. | |
| Resistance to soldering heat (Leakage current) | Within the value of item 2. | |
| Vibration (Capacitance) | Shall not show drastic change compared to the initial capacitance when measured within 30 minutes. | Frequency: 10 to 55 Hz (1 minute interval / 10 55 10 Hz) Amplitude: 0.75 mm (Total excursion 1.5 mm) Direction: X, Y, Z (3 axes) Duration: 2 hours / axial (Total 6 hour) |
| Vibration (Capacitance change) | Within 5% of the initial value | |
| Vibration (tan) | Within the value of item 2. | |
| Vibration (Leakage current) | Within the value of item 2. | |
| Rapid change of temperature (Capacitance change) | Within 10% of the initial value | Applied voltage: Without load Cycle number: 5 cycles |
| Rapid change of temperature (tan) | Within the value of item 2. | |
| Rapid change of temperature (Leakage current) | Within the value of item 2. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!